541 planing machines used for sale

Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 5 Spindle system: Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Feed speed adjustable by inverter up to 30m/min Feed motor 4kw Drive on cardan shafts Pneumatic clamps 3 axes controlled from the panel (width, height, pressure position) Worktop air cushions Input table length 2470mm CE Certified DTR documentation

Four-Sided Planer SCM Superset XL Mobile Spindle Working width 15-230mm Working height 6-120 mm Number of spindles 5 Spindle system: Bottom 5.5kw Right 5.5kw Left 5.5kw Top 7.5kw Bottom 5.5kw Spindle speed 6000r.p.m Pneumatic clamps Feed speed adjustable by variator 5-25m/min Drive on cardan shafts Electric working width adjustment (mobile spindle) CE Certified

PART NUMBER: 7679 SPECIFICATIONS - max planing width 610mm - max planing height on both sides 200mm - electric top, up/down adjustment - max planing height on four sides 100mm –in advance: - Pulling insertion shaft, toothed - Flingers -Pressure - 2 pulling shafts, toothed -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - pulling shaft, smooth, outfeed – from below: - guide strip - pulling roller, toothed - planer shaft 610mm, 4-knife 5.5kW - 2 smooth, pulling shafts –behind: - 2 side spindles + clamp 1) Vertical right 100mm 4kW 2) Vertical left 100mm 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - Manual planing width setting - 6 types of feed speeds: 7/9/11.5/14/18/23m/min - feed motor 3.1kW - dimensions length/width/height 2500x1800x600mm - weight about 3000kg ADVANTAGES – ideal for processin ...

SCM FS410 NOVA planer Working width 410mm Working height of the thicknesser 220mm Thicknessing table mounted on 4 supports Two planing speeds with a thicknesser of 6-12m/min 4-knife shaft Shaft with tersa knives Planing shaft diameter 95mm Shaft speed 5000r.p.m Additional fence for planing low workpieces with a planer Motor power 4kw Planer tops length 2200mm Slotting and drilling unit CE Certified Technical documentation

SCM FS410 NOVA planer Working width 410mm Working height of the thicknesser 220mm Thicknessing table mounted on 4 supports Two planing speeds with a thicknesser of 6-12m/min 4-knife shaft Shaft with tersa knives Planing shaft diameter 95mm Shaft speed 5000r.p.m Additional fence for planing low workpieces with a planer Motor power 4kw Planer tops length 2200mm Slotting and drilling unit CE Certified Technical documentation

Weinig Unimat 17 four-sided planer Working width 170mm Working height 140mm Number of spindles 6 Spindle arrangement Bottom 5.5kw Right 5.5kw Left 5.5kw Top 7.5kw Bottom 5.5kw Universal 5.5kw Adjustable heads Feed speed adjustable via variator 6-36m/min Drive on cardan shafts Feed motor 5.5kw Pneumatic material clamps Total power 41kw

Key data: 410 mm, 220 mm

Dressing and thickness planing machine TOP Master FS 410 Function tested Working width: 410 mm Max. planing thickness: 220 mm 4-knife shaft Dressing table length: 2000 mm 2 feed speeds Feed and Pull Roller: Steel Table rollers Tiltable stop Very good condition Weight approx. 900 kg

Key data: 5 , 120 mm, 230 mm

Planing and moulding machine Profimat 23 E Working width: 230 mm Working height: 120 mm Dressing table length: 2000 mm Spindle arrangement 1: Dressing 5.5 kW, 6000 rpm, 40 mm diameter 2+3 Left+ Right 7.5 kW, 6000 rpm, 40 mm diameter 4: Thickness 5.5kW, 6000rpm, 40mm diameter 5: Bottom 4kW, 6000rpm, 40mm diameter Feed motor: 2.2 kW Feed speed infinitely variable 0-24 m/min Milling heads with adjustment gauge Total power requirement: 27 kW Dimensions set-up: 3400 x 1650 x 1970 mm Machine weight, approx.: 3500 kg

Lower AL500 Planer 4knives width 500mm table top length 2950mm Soundproofing strips Angle-adjustable culaga power supply 380V brake, CE mark 5.5KW motor Solid machine, very good condition, checked

SCM F5L planer Working width 500mm 4kw main motor 4-knife shaft Traditional knives Main fence adjustable at an angle up to 45 Table top length 2600mm

Weinig Profimat 23E four-sided planer Working width 230mm Working height 120mm Number of spindles 6 Bottom 5.5kw Right 7.5kw Left Top 7.5kw Bottom 4kw Universal 7.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pulling roller clamps Electric pressure beam adjustment Tabletop lubrication system Year of production 1998

Kalin Pika 4-510 four-sided planer Working width 510mm Working height 240mm Number of spindles 4 Spindle system: 1.Bottom 7.5kw 2.Top 11kw 3.Right 11kw 4.Left 11kw 5. 2x top chamfer 2×1.1kW Feed motor 5.5kw Feed speed adjustable by variator 1-18m/min 1x grooved roller in the work table 2x smooth roller in the work table 4 rows of upper drive rollers Electromotive positioning of the machine in the range of 450x130mm The machine can work with dry and wet wood

Planer PF 530 chamboon/fimal made in Italy 4classic knives, the so-called wedge-mounted knives working width 530mm Table length 3000mm Angle-adjustable culaga 5.5KW motor weight 700kg CE marked, brake ex-display machine in like-new condition

Felder thicknesser planer spiral shaft 2 Thicknesser feed speed Thicknessing height 240mm planer: table top length 220cm planing width 41cm motor 4KW, 380V machine in working order and ready to work

WEINIG PROFIMAT four-sided planer max planing width 220mm max planing height 120mm 4 spindles, heads included spindles fully adjustable lower spindle – 4KW, right and left 7.5KW, top – 5.5KW feed rate 2.2KW on cardan shafts with smooth adjustment Electric up-down lift electric adjustment of the left vertical head branded machine preserved in very good condition

SAC planer made in Italy 4Traditional knives width 430mm table top length 2900mm Soundproofing strips Angle-adjustable culaga power supply 380V, motor 4KW brake Solid machine, very good condition, checked

SCM planer 4Traditional knives width 410mm length of table tops 2600mm Soundproofing strips Angle-adjustable culaga power supply 380V, motor 3KW brake Solid machine, very good condition, checked

SCM S520 thicknesser Max. planing width: 520 mm Max. planing height: 250 mm 4 Centrofix knives (insertion knives) Electric lifting 4 feed speeds metal torsion shaft Digital height readout rollers in the bottom table adjustable quiet operation, the original machine in nice condition

SAC planer 4Centro Fix knives width 530mm table top length 2900mm Soundproofing strips Angle-adjustable culaga power supply 380V brake, CE mark Solid machine, very good condition, checked

Weinig Unimat 500 four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle system: 1. Bottom 7.5kw 2.Rights 3.Left 11kw 4.Top 7.5kw 5.Bottom 5.5kw Powercom system Pneumatic clamps divided into 4 sections Feed speed adjustable via inverter Feed drive on gimbals Input table length 1970mm CE Certified

Paoloni PF2950 Leveler Planing width: 50cm L. tops: 295cm 4 traditional knives, the so-called wedge knives Soundproofing combs in the countertop

WEINIG PROFIMAT four-sided planer max planing width 220mm max planing height 120mm 5 heads, heads included Fully adjustable heads lower spindle – 4KW, right and left 5.5KW, up – 4KW and down – 5.5KW feed 3KW on cardan shafts with smooth adjustment Electric up-down lift electric adjustment of the left vertical head branded machine preserved in very good condition

Weinig Profiamt 22N four-sided planer Working width 230mmm Working height 120mm Number of spindles 5 1.Bottom 4kw 2.Rights 3.Left 5.5kw 4.Top 5.5kw 5.Universal 4kw Pneumatic material clamps Feed speed adjustable via variator 6-22m/min Feed motor 2.2kw Automatic worktop lubrication Worktop air cushion Length of the material insertion table 1970mm

WEINIG Quattromat four-sided planer max planing width 220mm max planing height 120mm 4 heads, heads included lower spindle – 4KW, right and left 7.5KW, top – 5.5KW feed on cardan shafts with smooth adjustment Electric up-down lift Electric planing width adjustment Branded machine preserved in good condition

PART NUMBER 7474 Specifications: - max width of the workpiece 230mm - max height of the workpiece 160mm - number of spindles 5 1) Horizontal bottom 230mm 7.5kW 2) vertical right 160mm 5.5kW 3) Vertical left 160mm 5.5kw 4) horizontal top 230mm, electrically adjustable up/down 7.5kW 5) Horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 6 pulling, toothed insertion shafts, including 2 double shafts - 2 pulling lead shafts, rubber, single from below: - Pulling, metal, torsion toothed insertion shaft - Metal, smooth metal pulling outfeed shaft - pressure plate on the side - pneumatically adjustable rollers - length of the introductory table top 2020mm - central lubrication - Electric planing thickness adjustment from the control panel - smooth feed speed control 6-30m/ ...

PART NUMBER: 7518 Specifications: - shaft width 810mm - number of knives 4 pcs - max thickness of the workpiece 250mm in advance: -Triggers - toothed insertion shaft, pulling shaft -Clamps - planing roller -Clamps - smooth, pulling outfeed shaft from below: - adjustable rollers in the bottom top 2 pcs - 7.5kW motor - electric lifting of the table top - 0.5kW lifting motor - 4 types of feed speeds -brake - extraction spigot diameter 160mm - dimensions length/width/height 1350x1450x1700mm - weight about 1100kg ADVANTAGES – Polish production – electric lifting of the table top – used thicknesser, very good condition Net price: 25900 PLN Net price: 6023 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)

PART NUMBER: 7503 SPECIFICATIONS: - max planing width 610mm - max planing height on both sides 200mm - max planing height on four sides 100mm in advance: - 2 rubber pull rollers - 2 toothed pulling rollers - metal pulling roller - Pulling insertion shaft, toothed -Triggers -Pressure - pulling shaft, toothed 2 pcs -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - Pulling roller, smooth, metal -Pressure - profiling roller 7.5kW -Pressure - rubber pulling roller From below: - scoring unit, axle 35mm, axle length 130mm 2.2kW - guide strip 2 pcs - Introductory table top - Pulling shaft, smooth - planer shaft 610mm, 4-knife (2 knives installed) 7.5kW - 2 pulling shafts, smooth - Split metal skid roller - side pressure behind: - Side spindles + clamps 2 - 1) vertical right 95mm 4kW - 2) vertical left 95mm 4kW - spindle diameter 35mm - spindles adjust ...

Griggio G240 P/5U Four-Sided Planer for Wet Maximum planing width 240mm Maximum planing height 160mm Number of spindles 5 Spindle arrangement Bottom 5.5kw Right 5.5kw Left 5.5kw Top 7.5kw Universal 5.5kw Drive in wet wood table Smooth feed control on the inverter up to 30m/min Year 2007 Weight 4100kg Machine dimensions 440x220x180cmH CE Certified

working width 230mm working height 130mm 5 heads + chamfering unit Head arrangement: lower/right/left/upper/lower head rotation 6000 rpm Memory system smooth adjustment of the feed speed up to 30m/min Feed on cardan shafts automatic toptop lubrication with adjustable droplet rate pneumatic pulling roller clamps

Weinig Unimat 1000 Star four-sided planer Working width 20-230mm Working height 8-160mm Number of spindles 6 Spindle system: Bottom 5.5kw 6000r.p.m Right 4kw 7000r.p.m Left 5.5kw 7000r.p.m Mountain 7.5kw 7000r.p.m Bottom 7.5kw 7000r.p.m Universal 7.5kw 7000r.p.m Automatic height and width setting Automatic Countertop Lubrication Pump Countertop driven rollers (1 corrugated roller for wet wood) Pusuw speed adjustable by variator 5-24m/min Weinig EM10 automatic material feeder