other wood working machines used for sale (1,423)

Manufacturer: Silo, Year: 2006, Capacity m³: ca. 250, Length mm x width mm x height mm: 7800x6582, Year :2006

Manufacturer: Homag, Type: FKR 78/C/A/S3, Monting of the machine: zerspanerteil zum Einkürzen, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-40, Min-max feed m/min: ca.18, Infeed table: yes, Premilling: yes, Fine milling: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Work piece refeeding: Bargstedt, Roller/belt: Riemen, Compressed air bar: 6, Return type: Bargstedt TFU,

Manufacturer: Rietschle, Type: G-BH1 2BH1900-7AH17, Engine power kW: 12,5, rotations rpm: 2950, Direkt drive: yes, Pressing: 280 mbar, Suction side mm: ca.100, Outlet side mm: ca. 100,

Manufacturer: HolzHer, Type: 1444, Year: 1991, Min-max feed m/min: 10 - 20, Premilling: yes, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Top pressure belt/roller: Rolle, Year :1991

Manufacturer: Nordfab, Year: ca 2000, Engine power kW: 22/25, rotations rpm: 2850, V-belt drive motor: yes, Suction side mm: 500, Outlet side mm: 500, Wight approx. kg: 700, Ex-protected: no, Year :ca 2000

Manufacturer: Biesse , Type: Stream B1 S3, Year: 2005, Control: NC 1600, Min-max edge material mm: 20, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 60, Min-max feed m/min: 25, Min.-max. batten magazine mm: 20, Bevel milling: yes, radius milling: yes, Radius scraper: yes, Buffing unit: yes, Year :2005

Manufacturer: Ritschle Seitenkanalverdichter, Engine power kW: 7,5, rotations rpm: 2930, Suction side mm: 70, Outlet side mm: 70,

Manufacturer: Hebrock, Type: TF 03, Year: 1998, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Kopierfunktion single sided: yes, Tracing by roller: yes, Arbeitstakt automatisch: yes, Engine milling kW: 0.5, Machine lenght mm: 1000, Compressed air bar: 6, Wight approx. kg: 200, mit Schwabbelstation, Year :1998

Manufacturer: Bartling, Type: Späneventilator, Year: ca.2008, Diameter intake mm: 400, Engine power kW: ca.18,5, Flow rate approx. m3/h: ca.8500, rotations rpm: 2850, Direkt drive: no, V-belt drive motor: yes, Enclosed impeller: yes, Outlet side mm: 400, Year :ca.2008

Manufacturer: Bartling Ventilator, Diameter intake mm: 400, Engine power kW: 18,5, rotations rpm: 2850, V-belt drive motor: yes, Enclosed impeller: yes, Suction side mm: 400, Outlet side mm: 400,

Manufacturer: Thorwesten, Type: SAM 90 NC Eckenputzautomat, Year: 1994, Control: Programm, Single-head automatic trimmer: yes, CNC axes: X und Y Achsen, Number of tools: 3, Min.-max. casement profile height in mm: 100, Workpiece feed automatic: no, Wendestation: yes, Year :1994

Manufacturer: Soenen, Type: SHCR, Year: 1996, Winkelschweissungen im Bereich von min-max Grad: verstellbar, Mit Schweissraupenbegrenzung an Tisch- und Spannplatten: yes, Spannhöhe min-max mm: 30-90, Kämpfer schweissen im Stumpfschweissverfahren: yes, Spannhöhe min-max mm: 30-90, Spannzylinder pneumatisch: yes, Schweissspiegel und Profilanschlag kommen von unten: yes, Einstellbare Schweissraupenbegrenzung: yes, Ausricht-, Abschmelz- und Stauchanschläge: yes, Digitale Anzeige der Schweisstemperatur: yes, Wight approx. kg: 500, Year :1996

Key data: 160 mm, 2 kW, 1770 m³/h

mobile chip extraction system AL-KO FMRG 1/160 Manufacturer Part Number: 4172370/2

Key data: 120 mm, 1 kW

Extraction System Extraction FIELDS TYPE: AF10 Connection diameter approx. 120 mm Motor power: 1.1 KW mobile. The machine works. Prior viewing is expressly desired, simply leave phone number by mail, then I will get back to you for a viewing appointment. all information without warranty. Subject to prior sale. The machines can be picked up by yourself or shipped by freight forwarder at the expense of the buyer. Loading or packaging can be organized by us. The shipping costs are a guideline, depending on the distance and unloading option they may vary, please inquire.

Wood Chipper, Wood shredder 18 KW Opening 600 x 800mm

Hammer C3-31 5-speed station wagon Year of construction 2024 With sliding table 2000mm Boom table 1100 with telescopic Length stop 1200mm swivel -45° 400V 3 kW (4 HP) 3 motors Degree Grid Index System Saw blade 250-315mm (without saw blade) Cutting height of 100mm Swivel: 90°-45° Parallel cutting width of 600mm Planing width of 310mm Planing fence can be swivelled 90° to 45° Dressing table length of 1400mm 3 Knife Automatic Planing Shaft Passage height from 4-225mm Thickness table length of 540mm Milling machine: 90° rigid Milling machine: 3000/6000/8000 and 10000 rpm Useful height 100mm Weight approx. 550 kg G&2992-o1852

weight max. in kg: 2000 kgGripping range: 1050-1200 mmSuspension: . 0weight: 180 kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kgGripping range: 700 mmSuspension: . 0weight: 60 kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Circular Saw Blade Sharpening Machine Vollmer Type CNS Suitable for CV circular saw blades for straight and bevel grinding Grinding wheel diameter maximum 150 mm Saw blade diameter 90 – 600 mm Sharpening speed 3 speeds 30/60/80 teeth per minute Drive warping disc motor power 0.2 kW Drive Feed 0.4 kW Dimensions 800 mm x 900 mm x H 1800 mm Weight approx. 250 kg

Body lifting and alignment device Strap belt table with lifting and alignment device Fezer Vacuum Lifter Control: Mitsubishi Melsec Dimensions: 3600 x 1200 x 930 mm More items - new and used - can be found in our shop! International shipping costs on request!

plate thickness: 4 mmblade length: 150 mmcutting angle: 30-120 °Table dimensions: 1000x650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Width rotor 1,300 mm Rotor diameter 370 mm Number of shafts 1 Main motor 22 kW Gate valve hydraulic Single blade interchangeable Loading from above Crushing tool Reversible knife

0: mm0: 2800 m³/h0: 5000 paFilter capacity: 14 m²Motor output: 5,5 kW0: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1100x1000 mm: 900 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: mmWorking width: mmWorking height: mmSchmalz VacuMaster Multi vacuum device 00 / 150-90 ° -1 Pos. 1 - Article 12.01.02.10520------------------------------------------with chain and Slewing CraneFor handling porous large-sized workpieces.VM-MULTI-400/150 H / 90-1EG1000x675Load 400/150 kgDesign: horizontal pivot 90 °Height: 540 mmControl Arm Length: 1025 mmEye diameter: 5 mmSauggreiferanzahl: 1Suction width: 675 mmSuction length: 1000 mmMotor power: 1.5 KWVoltage (50 Hz): 230 / 400V AC3Voltage (60 Hz): 230/460 V-DrehstomColour: RAL 7035 light grayVacuum Lifting Device VacuMaster Multi-------------------------------------------------- -Type VcuMaster Multi 400 / 150-90 ° -1for the transport of plates with a porousbut also with a dense surface such asraw and laminated chipboardraw and laminated MDF / OSB board,Plastic, plasterboard ..consisting of:Spur gear motor with b ...