other textile machines used for sale (229)

Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible.

Various sewing machines are available. 1) Bartacking machine Dürkopp 570. 2) Bartacking machine Dürkopp 570. 3) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 4) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 5) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 6) Sewing machine Pfaff 463-6/27. 7) Sewing machine Dürkopp Adler 271-14004. 8) Sewing machine Pfaff 481/900/99, needle: 1. 9) Sewing machine Pfaff 1181 Racing Puller. 10) Sewing machine Dürkopp Adler 272. An on-site inspection is possible.

diameter: 800 mmroll surface width: 1800 mmheating system: Sattdampf 00: 860 Liter0: 5 barmax. temperature: 168 ° Cweight: kgrange L-W-H: 2,2 x 0,8 x 0,8 m4 pieces in total, drying drums Ø 800 mm, steam-heated, including pedestal bearings,foto no. 4 shows how the drying cylinder works.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

These are 21x21 inch and 30x42 inch warp beams, for direct warping and knitting mills. With documentation, without accessories. No defects known, last overhauled. An on-site inspection is possible.

Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

Max. punching force: 300kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 11kVA, length: 4800mm, width: 3400mm, height: 2800mm, net/operating weight: 10/13t, operating hours: 2818h, with documentation. The control was renewed in 2022. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

Max. punching force: 500kN, max. punching stroke: 200mm, die support dimensions: 13,200x1500mm, conveyor belt dimensions: 7435x1995mm, max. punching area: 1800x750mm, max. strokes: 80/min, connected load: 34kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 52,680h, with documentation. Equipped with extraction system, rotatable tool enabling nesting, tension-free unwinding possible. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

Four fabric inspection machines are available (1) Menzel WOB 1.600mm fabric inspection machine, working width: 1600mm (2) Menzel WOB 3.200mm fabric inspection machine from Hoftex, working width: 3200mm (3) Bauch Maschinenbau CB-WU 380 fabric inspection machine (4) Maag CT 5206-Ah fabric inspection machine. On-site viewing is possible.

A package with a Brückner stenter frame and additional elements is available: 1) Brückner stenter frame SPR 2, 2) Goller washing machine, 3) ECO-Heat exhaust air purification system for Brückner stenter frame, 4) Foulard with Küsters control unit and hydraulic unit, 5) Pleva SL 2.1 entry straightening unit, 6) RS Scheuchl heat recovery system, 7) Pleva SL 2P exit straightening unit. An on-site inspection is possible.

A package of twelve dyeing machines is available: 1) 2x Then AFT 225 dyeing machines, 2) Then AFS 50 dyeing machine, 3) Then AFE 50 dyeing machine, 4) 4x Then AFS 225 dyeing machines, 5) Fongs HST 130/32 dyeing machine, 6) Then DN 200 dyeing machine, 7) 2x Then OFHT 170 dyeing machines. An on-site inspection is possible.

A fabric spreading machine Kuris is available. Length: 13000mm, belt width: 1800mm, width: 2150mm. Includes Pionier Super PC Electronic control and unwinding device. Documentation available. An on-site inspection is possible.

An industrial cutting system Kuris for textiles, films, or other flat materials is available. 1) Servo cutter Gerber. 2) Table with a continuous conveyor belt, width: 2550mm, vacuum system Omron Varispeed E7. Documentation available. An on-site inspection is possible. The system is dismantled and ready for loading.

An industrial cutting system Kuris for textiles, films, or other flat materials is available. 1) Automatic servo cutter Kuris. 2) Table, length: 16790mm, width: 2150mm. 3) Spreading machine Kuris Pionier Super PC Electronic. An on-site inspection is possible. The system is dismantled and ready for loading.

Kraus and Reichert Kuris KVS700 Bumper Knife Machine Fabric Cutter Textile Item condition: Used and tested for function. _RD 6kg More textile machines - new and used - can be found in our shop! International shipping costs on request!

Working widths: 1800 mmroll surface width: 2000 mmdiameter: 220 mmrubber quality: Weichgummi rubber: R89, gelb Shore: 75° shoretype: 222.11/1800 1 pair of rollers (piece) for dyeing padder 222.11The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A filter and recovery system with filling and intermediate shaft and a new control system as peripheral equipment for the production of technical nonwovens and felt is available. Components: Fan, three-phase motor WN 1 8030 T.50, condenser Erko, separator (exhauster) Erko, filling shaft, intermediate shaft. Control cabinet dimensions X/Y/Z: approx. 1200mm/600mm/2200mm, weight: approx. 300kg, year of construction: 2023, total system dimensions X/Y/Z: approx. 3150mm/1100mm/3700mm. Documentation available. On-site inspection is possible.

An ACG Nowo (ACG Kinna Automatic) pillow machine for processing cotton and for filling in textiles for pillow production is available. Documentation available. On-site inspection is possible.

Printing technology: piezoelectric inkjet printing, print resolution X/Y: 1440dpi/1440dpi, print area X/Y: 615mm/415mm, machine dimensions X/Y/Z: approx. 1300mm/800mm/500mm, weight: approx. 80kg. The print heads as well as the ink and cleaning hoses must be repaired. Includes software CD and several printing plates/formats. Documentation available. An on-site inspection is possible.

A total of 5 sewing machines from various manufacturers are available. 1) Brother LS2-B837. 2) Adler K767 990001. 3) Mauser MA335-G-6/01-BLN. 4) Brother KE-430 FX-05, year of manufacture: 2017, needle: 135x172 Nm110. 5) Dürkopp Adler. On-site inspection is possible.

Bridge punch of the company Schön, model 64035 / 92 The machine is fully functional.

Atom cart beam punch with 25t. The machine is fully functional.

Shoe/Leather Goods Sharpening Machine with Table. The machine is fully functional.

Bridge punch from Sandt with 30t

Kiefel Roller Sheeter

Leather splitting machine Camoga Cn 412 with 40cm working width

Leather splitting machine Camoga C 520 L with 50cm working width

Slitter rewinder for artificial leather or textiles Width 160cm

A winding machine SAHM for the textile industry is available. Heads: 182, core: 90mm, stroke: 400mm. Conversion to 200/250 is possible. On-site inspection is possible.

There are 5 sewing machines available: 1) Pfaff linking machine with elastic and 2-needle flatbed for fitted sheets, 2) Pfaff 1446 2-needle flatbed sewing machine for gathering, 3) Adler 204-4102 S beading machine, 4) Pfaff 1422 2-needle flatbed sewing machine for zippers and 5) Global LP 9226 LH-SNB 2-needle column sewing machine with double seam.

A spinning, drawing and winding line for the production of monofilament yarns, multifilament FDY and POY is available. Spinning positions: 24, yarn ends: 192, drafting: cold and hot godets, package change: without yarn breakage, number of godets heated/cold: 50/50, number of winders: 24 (+2 reserve winders). Including various spare parts for the machine and electronics. Documentation available. On-site inspection is possible.