other machines for mechanical handling used for sale (5,536)

BÜHLER MWSB-100 dosing screw conveyor for weighing 100 mm diameter, length 2.75 m Engine 0.75 kw, rpm 107 Thread in the inlet progressive, inlet ø 390 mm, Outlet ø150 mm with pneumatic outlet Very good condition

Dosing screw conveyor BOSCHE 150 mm diameter Length 1.30 m Engine 1,5 kw 32 rpm right-hand thread, slope 110, at the outlet slope 150, Sliding Inlet 270 x 680 mm, outlet 170 x 170 mm Review and test run in our qualified workshop done Good condition

Redler 25 meters length Trough chain conveyor Horstkötter TTF 25 Engine 1,5 kw 84 rpm Good condition

weight max. in kg: 10000 kgweight: 10 kgdimensions: 700 x 300 x 300 mmwith power supply and remote controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Belt conveyor, Transnorm, approx. 3.55m long – used - Price ex location (net): only 995.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos40 Manufacturer: Transnorm Type: TS 1200 Belt Conveyor Year of Make: 2003 Length: 3,000mm Nominal width: 400mm Belt type: NSL – 10? LBV Strap Length: 6075mm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony

Climbing belt / belt conveyor, Transnorm, approx. 2.83m long – used - Ex-site price (net): only 895.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos38 Manufacturer: Transnorm Type: TS 1200 Belt Conveyor Year of Make: 2003 Length: 1230+800+800mm Nominal width: 400mm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony

Belt conveyor, Transnorm, approx. 2.20m long, approx. 1m wide – used - Price ex location (net): only 995.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos33 Manufacturer: Transnorm Type: unknown Year of manufacture: unknown Length: c. 2.20m Nominal width: approx. 1m Panel width: 1.10m Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony

Min. 4x belt curves, VanRiet, 90 degrees, driven - used - Price per piece ex location (net): incl. loading Manufacturer: VanRiet Type: Belt Conveyor Curve Year of Make: 2017 Condition: good – very good Available: immediately Location: Frankenberg camp / Saxony No. 2 + 3 – 2.950.-€ (net) Element width: approx. 1.42m Belt width: approx. 1.20m Height incl. feet: approx. 61cm. Radius: outside / outside approx. 4.70m Voltage: 230/400 V, 50Hz, 4.75A, 3kW No. 21 + 23 – 2.950.-€ (net) Element width: approx. 1.42m Belt width: approx. 1.20m Height incl. feet: approx. 61cm. Radius inside / inside approx. 2.20m Voltage: 230/400 V, 50Hz, 4.75A, 3kW

approx. 38m driven roller conveyor in 2 levels (2x approx. 19m) - used - : Price ex location: 2.500.-€ (net), dismantled, packed and loaded! Manufacturer: unknown, Type: unknown Year of manufacture: unknown driven approx. 19m in 2 levels Element width: approx. 63cm Roll length approx. 47cm Roll diameter approx. 4.5cm Incl. feet (height adjustable) Height second level: approx. 1.34m Sale without control, photoelectric sensors e3tc.! Condition: good Available: from approx. End of October 2024 Location: CZ, Bor, later camp Frankenberg / Saxony

Load beam Manufacturer: Carl Stahl Length: 3 m Load beam in a modular system with curved suspension loop as single-point suspension, suitable for load hooks according to DIN 15401 and with two adjustable, burnt safety load hooks.

Used plastic rollers for flow rack - roller strip - picking rack - 100 pieces - yellow Properties: - Rollers compatible with many manufacturers of flow racks - Spare rolls in a practical bag - Rollers are mounted in the click system - Manufacturer: SSI Schaefer - Colour: yellow - Used, in very good condition - Rolls made of robust polypropylene (PP) - Rollers with stable plastic axle/sometimes also steel axles Metrics: - Roll width: 25 mm - Roller diameter: 26 mm - Axle width: 34 mm - Axle diameter: 4 mm Scope of delivery: - 100 pieces of rolls (without mounting profile) All information without guarantee. Characteristics: Quantity: 100pcs. Item condition: used Color: Yellow Properties: Roll width: 25mm Roller diameter: 26mm Axle width: 34mm Axle diameter: 4mm

Rail cars, shunting cars Previous use: Timber warehouse Approx. 25 pcs. Dimensions 400x 150 and 350 x 150 cm

Capacity: Up to 25000 bottles per hour

Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium flat conveyor belt without substructure Horizontal area 6,000mm (customizable) Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable, machine feet Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PVC conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control Scalloped edge: 80x50mm flush with both sides Centrally welded T75 studs 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently approx. 2-3 w ...

approx. 5 pieces ball roller tables, 2,88m x 0,57m - used - : Price from location: 850.-€ (net), dismantled, packed and loaded! Price for the purchase of all 5 tables: 3.750.-€ (net) dismantled, packed and loaded! Supplier: TGW Manufacturer Castors: ALWAYSE Type: unknown Year of construction: unknown, Length: approx. 2.88m Width: approx. 57cm Height with feet approx. 79cm Condition: good Available: immediately Location: Biebergemünd

approx. 10,000 ltr./10 cbm stainless steel bulk container / storage container for pallets, wood chips, animal feed, fruits, grapes, etc. formerly grape receiving tub Vauchet Beguet FR, year 2000, used, large discharge gap controlled with 2x pneumatic cylinders (infinitely adjustable), approx. Dimensions: L: 6.50 m, W: 2.40 m, H: 1.75 m, height underframe: 2.50 m, weight with base: 3 to. Discharge via conveyor belt B: approx. 300 mm, conveyor belt speed infinitely adjustable via variable speed gearbox

Technical data for the picking rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,340 mm Number of fields / row of shelves: 01 pcs. á 1,290 mm Number of levels plus floor level: 07 pcs. Note: The advantage at a packaging table or at a Picking rack is that has all the tools needed & accessory materials used to create the product are always at hand. The scope of delivery includes: 02x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts Weight / pcs.: approx. 5,50 kg The stands are pre-assembled 1,200 mm high 610 mm deep 07x Shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at eve ...

Offer here a linear actuator with 30cm stroke and 8cm piston diameter. Ready to use with check valves, flanges, 16mm QuickLocks. It also comes with a plant dismantling and worked without any problems until the expansion. It can be seen in Weyhe near Bremen.

Weibert 2,5t Pallet trucks Industrial and commercial execution with weighing device Display Lifting capacity 2500 kg max. fork height 192mm min. fork height 77mm Fork dimensions 1150x540mm Stroke 120mm Roll diameter 180/80mm Weight 99.5kg G&HM-HUBW CRADLE

RA1851electromechanical pusherinstalled in a support frame made of aluminum profilesFunction:Push-off of the incoming material 90° to the conveying directionMake: Transnormouter dimensions of the frame: LxWxH=1.720x1.080x940 mmsuitable for infeed conveyor up to 1000 mm total widthdimensions of the push-off panel: H=600 mm, W=650 mmtotal weight: 108 kgFeatures: condition: good (used)Construction year: 2008Länge in mm: 1720Width in mm: 1080Height in mm: 940Nominal / outside width in mm: 1080Antrieb: SEW Getriebemotor mit MOVIMOTElectric data: 380-500KW: 0,055/0,55/S1Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. K ...

electro-mechanical pull installed in a mounting frame made of aluminum profiles Function: Deportation of the incoming material 90° to conveyor direction Make: Transnorm Measurement of the mounting frame: Lxwxh = 1.075 1.125 x 1 000 mm Measurement of the Abschiebepaneels: H = 600 mm, 650 mm, B = Total weight: 108 kgFeatures: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KGIhr Spezialist und Ansprechpartner für Intralogistik

Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned obj ...

The Posimat PB 80 is a pneumatically operated handling device. Version : with counterweight, suspended from on-site steel construction. Specifications: Load capacity: 120 kg; Hub; 1,600 mm; working range (radius) 2,600 mm; dead weight without counterweight and column: 150 kg The device was only in use for a few months.

Bizerba CWL Eco flex continuous scale with Sick VMS520 volumetric measuring system Bizerba CWL Eco flex Continuous Scale Dynamic weight detection with volume determination The CWL Eco flex can be integrated almost effortlessly into existing parcel shipping, sorting systems and feeding lines. Bizerba WM-CWL flex Continuous Scale Model: CWL Eco in Motion DE-09-MI006-PTB018 Max 60 kg Min 0.4 kg 230 V Sick VMS520 volume measurement system Features • Non-contact, active measuring method • Measuring the length, width and height of cuboid objects • Measure the length, width and height of objects with almost any shape • Works with a wide variety of surface structures and on different flat conveyor systems • Flexible system configurations • Calculation of the small-envelope cuboid (box volume) • Calculation of the real volume Device components Sick ...

The scope of delivery includes: 01x idler, second choice Application: for roller conveyors Material color: sendzimir galvanized Material: Steel Type designation: MRT-50x1,5.20 Total length: 625 mm Web width: 595 mm Roll Ø: 50 mm Thread: smooth with spring pressure Weight / pcs.: approx. 1,370 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

40 used pallet trolleys / pallet trolleys with slight signs of wear, metal frame: 600 x 800 mm,

Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Year of manufacture: unknown Condition: Used Model/Type: Strap Manufacturer: unknown total length: approx. 730 mm Total width incl. motor: approx. 760 mm Total width without motor: approx. 730 mm Belt width: approx. 600 mm Strap Type: Smooth Colour: Grey/ Blue Material: Stainless steel/ Aluminum Frame height: approx. 100 mm Drive type: Motor Includes SEW motor Thanks to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics. For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to provide you with an individual offer or advise you on co ...

Tipping body Manufacturer: Bauer

properties: Used belt conveyors curve 90° Transnorm Condition: Fully functional with traces of use Ideal for fast material transport Expertly dismantled and packed Incl. motor 0,55Kw and side guide Feet to be ordered separately Color: Silver/ Yellow 1 pc in stock specifications: Dimensions of the belt conveyor curve 90° Type: 1600-105 Total outer width: 1,820 mm Total width inside: 750mm Total width incl., motor: 870mm Curve angle: approx. 90° degrees Belt width: 500mm Strap Type: Gripp Frame height: 220mm Material: Aluminum / Steel Belt conveyor curve Due to the excellent workmanship of the belt conveyor curve, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, Schraegfoerderer or telescopes for loading and unloading your goods, we are your  ...

The scope of delivery includes: 01x roller conveyor stand, used Total width with base plates: 475 mm Frame width: approx. 445 mm Minimum height: approx. 640 mm Maximum height: approx. 870 mm Total depth with base plates: approx. 160 mm Frame profile illustration: C 80 x 35 x 12 mm Connection strut fig.: approx. 380 x 60 x 50 mm Mounting plate abm.: approx. 140 x 135 x 3.00 mm Borehole Ø: approx. 9 mm Borehole distance: approx. 100 mm Material thickness frame profile: approx. 2.50 mm Material color: sendzimir galvanized