other machines for mechanical handling used for sale (5,457)

0: 10000 kgheight of stroke: 130 mmTotal height: 290 mmweight: 21 kgdimensions: 190 x 260 x 290 mmHydraulic machine jackFoot height 22mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5000 kgheight of stroke: 120 mmTotal height: 243 mmweight: 15 kgdimensions: 170 x 230 x 250 mHydraulic machine jackFoot height 19mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Triple flour-collecting screw conveyor in steel design Total length 6.2 m, outlet at 5.2 m Screw diameter 150 mm 1 m counter-rotating thread, slope 105 cleaning flaps, Wooden lid with folding boxes, 2 intermediate bearings each, motor 1.5 kw

pulling capacity: 32 kN: 20 m: 16 mmwinch traction in steel case, as good as newpulling power with lever pipeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EU pallet chassis, heavy-duty trolleys, transport scooters, dray Dimensions: width x length x height (approx. 82 x 122 x 46 cm) 4 heavy-duty roller wheels (2x swivel castors) Very stable steel frame with 4 protection angles) Portable with forklift It is sold as shown. All information without guarantee

Steel cables Wire ropes Slings made of steel Length: 10 m Diameter: 25 mm Hoses right/left Load capacity: 5 to. 10 pieces available

Mechanical shut-off valve KRAFT 100 mm diameter AluHand lever We have three pieces of this model in stock, along with many other pipe valves, inlet valves, flaps, pipe crossovers for a wide range of applications. We look forward to hearing from you!

JAUDT butterfly valve 200 mm, 80 mm installation height with pneuma cylinder Dust cuffs As available, overhaul by arrangement in our specialist workshop. We have six pieces of this model in stock, along with many other pipe valves, inlet valves, flaps, pipe crossovers for a wide range of applications. We look forward to hearing from you!

Pneumatically actuated outlet valve with rod cylinder WABCO x 63 x 400 mm 5/2-way solenoid valve 220V and position switch 80mm high Inlet side with hose connection socket s.350 (screwed on), checked The slider is currently limited to 260 or 160 mm stroke by limit switches We have two pieces of this model in stock, along with many other pipe valves, inlet valves, flaps, pipe crossovers for a wide range of applications. We look forward to hearing from you!

Outlet valve 135/135 mm, with geared motor 0.09 kW, 8 rpm, Frame height 80 mm With 2 limit switches Discontinued transition . functionally tested, good condition We have four pieces of this model in stock, along with many other sizes for a wide range of applications. We look forward to hearing from you!

Angular cup unit, elevator, continuous conveyor used Manufacturer: GOUGH ENGENEERING Height approx. 7 m Shaft approx. 750 x 620 mm Plastic chain Plastic cups approx. 450 x 200 x 120 mm Gearmotor Bauer 0.75 kW 27 rpm Thanks to our own special machine construction, changes are also possible according to your wishes. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale. Search terms: Becherlevator, Becherwerk, Winkelbecherwerk

Angular cup unit, elevator, continuous conveyor used Manufacturer: GOUGH ENGENEERING Height approx. 7 m Shaft approx. 900 x 630 mm Stainless steel chain Plastic cup approx. 600 x 220 x 130 mm Gearmotor North 1.5 kW Thanks to our own special machine construction, changes are also possible according to your wishes. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Trough chain conveyor TKF Redler up to 120 to/Hused Trough width inside approx.: 300 mm Trough depth inside approx.: 320 m Trough length approx.: 6800 mm Inlet opening approx.: 300 x 400 mm Exhaust opening approx.: 300 x 600 mm Taker distance approx.: 130 mm Drive motor NORD 220/380 V, 1.5 kW, 1410/18 rpm by replacing the engine, power can be increased Total length approx.: 6900 mm Other names: TKF, Reedler, Chain Conveyor

Manufacturer: NERAK Type: WB 370 Built in 2003 CC-foot 2160 mm CC-Vertical 9600 mm CC head 3110 mm Plastic cup approx. 36 cm wide 20 cm deep approx. 10 cups per m Rubber block chain Speed: 0.3 m/s Power 5-10 m3/h (bulk density 0.5-1.0 t/m3) User manual and technical drawings available

Servolift QKS NG 1000 Fassdehrer not complete - Hydraulic unit and barrel holder are missing

Servolift HC for Pallets / Container Hub

Pipe screw conveyor screw inclined conveyor without motor used Our own special machine construction can also be made. Pipe diameter approx. 260 mm Pipe length approx. 4780 mm Screw coil length approx. 4200 mm Inlet/outlet-diameter approx. 250 mm Screw tube top open with lid Price without engine We adapt the engine to their use at an additional cost. Ideal snail for wood chips or similar wood chips. Total approx. 5050 x 1000 x 600 mm 2 pieces available

Pipe screw, cement screw used without motor for the conveyance of cement or similar materials with directly attached bearings Total length: 6520 mm Screw aisle length: 6130 mm Screw aisle: 210 mm Shaft of 80 mm, slope progressive at the inlet Opening opposite the driven side: inside 210, flange 280 mm Opening 1 driven side: 250 mm Opening 2 (with lid) diameter: 200 mm Matching motor and overhaul can be offered optionally. Drive via flange motor with coupling

Trough length approx. 7300 mm Trough width approx. 280 mm Trough depth approx. 400 mm Inlet approx. 640 x 280 mm Spout approx. 320 x 280 mm Taker distance approx. 160 mm Taker width approx. 180 mm Chain gears Drive gear motor SEW-Eurodrive R67-DVE100M4 230/400 V; 8.0/4.6 A; 50 Hz; IP54 Power: 2.2 kW; 1455/62 rpm Total approx. 7400 x 750 x 1000 mm

Stainless steel round conveyor ring conveyor trough 5850 mm used. Gutters width approx. 120 mm Gutters depth approx. 160 mm Deflection part approx. 800 mm Drive part approx. 900 mm with outlet part Total height approx. 800 mm Engine: SEW 3 kW, 29 rpm. Size approx. 5850 x 900 mm

Acceptance bunker 3,550 x 6000 x H 1,560 mm, for bulk solids, with 3 dosing screws Universally applicable acceptance bunker for bulk material e.g. grains, wood chips, potatoes, waste... Conveying volume depending on bulk material 1 - 80 m3/h The pick-up bunker is filled from above on a easily accessible side of the acceptance bunker by means of a shovel loader. The access roads and exclusion zones must be marked in order to avoid accidents and damage to the bunker and its extensions by starting up. The three parallel, identical and directly driven snail trees transport the goods through a partition wall to a cross-arranged snail tree. The partition wall prevents the conveyed material from flowing back into the acceptance area. The product is transferred to the connected trough screw conveyor (TS 420 x 7,000) by the frequency inverter-controlled cross-screw, which is desig ...

Scissor-bubtisch with driven roller conveyor - used - Price (net) from location: only 1.500.-€, dismantled and loaded! Manufacturer: Schwinghandl Built: 2013 Type: Roller conveyor / scissor stroke table Length of roller conveyor: unknown Wide element approx. 75cm Roll length: approx. 68cm Roll width: approx. 5cm Element height: approx. 15cm Lifting height: currently approx. 78.5cm Engine: SEW Condition: good Available: now Location: Zwickau, later Frankenberg camp (Saxony)

Driven roller conveyor that can be rotated at right angles (90 degrees) by motor drive - used - Price (net) from location: only 1.500.-€, dismantled and loaded! Manufacturer: should be Siemens Dematic Built: Type: Length of roller conveyor: approx. 1,645m Wide element approx. 75cm Roll length: approx. 60cm Roll width: approx. 5cm Distance between rolls approx.: approx. 5cm Height: approx. 55cm Engine: SEW Length frame: one side approx. 2m, other side unknown (but can be changed anyway by the aluminium profiles Condition: good Available: now Location: Zwickau, later Frankenberg camp (Saxony)

2 pieces curve belt conveyor 180 degrees, helix for climbing bands with SEW - used -: Price per piece from location: 2.995.-€ (net)! Manufacturer: Transnorm Type: 1600-105 Helix Built: 2011 Conveyor curve 180 degrees Nominal radius: 600mm Rated width: 700mm Condition: good Available: now Location: Bautzen warehouse

properties: Condition: fully functional, with traces of usage Feet to order separately Colour: Blue Material: Steel Ideal for fast material transport Expertly dismantled and packaged Price per pc. 7 pcs in stock Technical data: Dimensions of the roller conveyor curve Total length outside approx.: 1830 mm Total length inside approx.: 840 mm Total width: 1.015mm Conveyor width: 1.010mm Roll diameter: 50mm Curve radius approx.: 90 degrees frame Height: 390mm roller conveyor curve Due to the excellent workmanship of the roller conveyor curve, your material glides gently to the destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt tracks, inclined belts or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on  ...

with membrane conveying

Properties: Used labeling machine with labeling system Very stable design Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Technical data: Manufacturer: SRD Type: Stano/- Alone-Line Device: Valentin SPE 106/12 Semi-automatic labeling system for image and sound carrier See user manual, schematic and pneumatic diagram Changes and errors in the technical data as well as intermediate sale reservations Roller track The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimizing the internal process. During transport, the roller conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line before or between production and mach ...

Properties: Used telescopic belt conveyor Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged 4 pieces in stock Price per piece Technical data: Manufacturer: Hermann Schmidt Built: 1994 Total length (retracted): 6,100 mm Total length (extended): 11..600 mm Drive type: Hydraulics Total width incl. control cabinet: 1,400mm Total width: 950mm Head incl. frame: 1.660mm Colour: Red Belt type: Smooth Belt width: 2x 600mm 1x 590mm 1x 500mm telescopic belt conveyor The telescopic belt conveyor is ideally suited in the picking zone to interlock machines or workstations and to optimize the internal operation. During transport, the telescopic belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units ...

Properties: Manufacturer: Interroll Condition: good (used) Clamping length: 610mm Roll length: 600mm Roll diameter: 60mm Wheels with internal thread Material: Steel Stock: 32 pieces Price per piece Tailor-made logistics for your intralogistics We are your competent contact for roller conveyors, belt conveyors, schraegfoerderers or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and the local conditions. Take advantage of our long-running experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Together, we will work out ways to optimize your flow an ...

Properties: Manufacturer: Interroll Condition: good (used) Clamping length: 630mm Roll length: 610mm Roll diameter: 60mm Rollers with spring axle Material: Steel Stock: 39 pieces Price per piece Tailor-made logistics for your intralogistics We are your competent contact for roller conveyors, belt conveyors, schraegfoerderers or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and the local conditions. Take advantage of our long-running experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Together, we will work out ways to optimize your flow and m ...