other machines and plants used for sale (14,194)

Gate valve, ball valve Brand BORSIG Operating pressure 100 bar ANSI 600 Manufacturer # A51801005 Pipe DN 300 Price 500.00 euro net

Properties Used MULTI PANEL Simatic dimensions: Total height with monitor: 1,620 mm Height without monitor: 1,100 mm Control cabinet Height: 500mm Width: 540mm Depth: 240mm > b > monitor Height: 310mm Width: 400mm 1 STK. in stock

Complete fuelling station for minerals with hose unroller, pump gun with liter reading, Pump with pressure monitoring. Oil pump with automatic hose reel with spring drive and Pump gun with integrated mechanical chime. Ideal for the exact filling of hydraulic oil tanks, Diesel in vehicles, etc. Probably also suitable as a diesel filling station. Special price

Attachment pocket filter with 12 m2 filter area (12 pockets, 500 mm x 1,100 mm each), 1.5 kW fan (1,500 m3/h) and jet cleaning, flange dimensions: 1,230 mm x 630 mm. Multiple identical units available.

Rectangular, stackable transport container in stainless steel 1.4301, filling volume: 500 l., permissible total weight: 1,197 kg, inlet: 560 mm , outlet via manifold with flange (without ball valve). Minimum wall thickness: 1.5 mm.

Pneumatic conveying system for various types of powder, consisting of: feed hopper with lid and compressed air turbine vibrator (netter NCT 10), injector (Telschig 2' FOX 300-SCE-SS) and side channel compressor (Electric Sd 820, 7.5 kW, 9.0 m3/h, 420 mbar) with pressure limiting valve. Flow capacity: 375 kg/h, required conveying air: approx. 180 Nm3/h at 330 mbar.

Installation consisting of 2 lifting tables (in the form of a staircase) each with 1,500 kg load capacity, lifting height: 1.2 m each, incl. base for the higher lifting table (1.5 m high), hydraulic unit and control cabinet. Tables can also be used individually.

Fine grinding plant consisting of: Alpine 630 AFG fluidized bed counter-jet mill (V ges: 885 dm3, 10 bar pressure-shock-resistant, saerterrad fold-out), feed station, cyclone, 2 pcs. EX-protection valve, control cabinet and 4 pieces of product buckets. Previous use: Grinding of toner. The system can be inspected in a disassembled condition. Available at an additional cost: Dust filter Bühler PGFG 60/18 (39 m2 filter area).

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.

Planetary mixer with infused tool, 2 mixing stars, 4 mixing buckets and scraper / emptying bucket. Maximum filling per batch: 2,250 l. / 3,600 kg, solid concrete output per batch: 1,500 l., workable grain size: 0 - 65 mm, with double-sided swivel valve outlet (hydraulicact). Incl. main drive motor 75 kW and many spare parts.

High-temperature oven with a maximum working temperature of 1,800C and lowerable/swivel bottom. All sides of the furnace chamber are heated with Kanthal super elements (= MoSi2). Temperature homogeneity is achieved by downward removable U-elements. Operation with 3 transformers and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). The oven is practically unused (only about 50 fires).

WaelzpistongeblaeseManufacturer: LeyboldType: RUVAC WSU 2001Cat No.: 11741Suction moulds: approx. 2000m3/hStatus: GeneralueberholtGewastperformance: 12 months (similar); ready for use

Qty. 1 Second-hand extrusion press line Mfc.: 3TC, Allen Bradley, Rexroth, Gautschi, Elhaus, Nederman, Hydrotec, Marx GmbH, Truninger, Ekatech Force: 3500 MT Built: in 1960’s Pressure: 315 bar Billet dia.: 343 mm x 900 mm (can be modified 14 x 1.0 m) Modernisation: 2011 Complete exchange of control system on press to Allen Bradley Control Logix including encoders for Ram, Container and Shear. Change of pump controls to Bosch Rexroth HS4. 2012 Complete change of hydraulic system (excluding pumps). New side cylinders and container cylinders. Safety rebuild of press and with change of PLC to Allen Bradley Control Guard Logix L72S (which is the current CPU). Change of control system of billet furnace. Complete new electrical system and integration of logic into the press PLC. Modernisation of gas burners in the furnace. 2013 Change of one of the main pumps to Bosch Rexrot ...

Oel-Diffusion pumpManufacturer: Leybold Type: DIP 50,000Status: usedTechnical dataProduct: DIP 50000 Catalogue: 22240Connection flange Suction side: DN 1000 ISO-F Connection flange Print side: DN 160 ISO-KSuction Below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l/sworking range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 TorrFinal pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 TorrMax. pre-vacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Equipment: Pump is delivered without equipment quantity of equipmentmin.: 12.0 l 12.7 qtmax.: 25.0 l 26.4 qtgrid connection: 3-ph Y, 400 V, 50/60 HzHeating capacity: 24 kWNumber of heating cartridges: 24Heating time: < 30 minNumber of cooling water circuits: 3Cooling water minimum pump: 1500 l/h 6.6 gal/minDuesenhut steam barrier: 150 l/h 0.66 gal/minMax. Cooling water pressure: 6 bar 87 psiCooling water connection pump: 1/2, internal thread F ...

Vacuum pumpManufacturer: KinneyType: KT-505 LPStatus: used; ready for use

Waelz Piston Pump Booster Vacuum PumpManufacturer: BuschTyp: Panda WV 4500 BSuction plugs: 4100 m3/hVacuum: Pre-pump outputGewawting capacity: 12 monthsStatus: as good as new, reserve device; ready for use

Rotary vane vacuum pump Manufacturer: BeckerType: U4.630 SA/K o. F/KVacuum: 3 mbar - 0.5 mbarmotor: 15KW Status: used, tested! The general recreation for the Geraet is offered separately! Inclusive: oil filling, vacuum intake filter delivery time: from stock!; ready for use

Rotary vane vacuum pump Manufacturer: BeckerType: U5.100Suction power: 100 m3/hend pressure: 0.1 mbar (abs.) Inclusive: Gasbalast, oil filterStatus: PerformancePerformance: 12 monthsdelivery time: from stock; ready for use

Waelz Piston Pump Booster Vacuum PumpManufacturer: BuschTyp: Puma WP 1000 D2Status: used, testedA complete recovery can be offered as an alternative. Then with 12 months of service to the geraet.; ready for use

Manufacturer: Busch Type: Mink MI 1502 BP Engine: 18.5 KW ; DS 400V Status: Used, partial performance: 6 monthsVolume flow: 500 m3/h compression pressure: +1.2 bar Accessory: additional suction filter (changed) ; Operating manual delivery time: approx. 1-2 Where.; ready for use

Opening tool unit/geared motor for coconut fiber ropes. Thus, twisted coconut fiber ropes can be rotated up from 3 to 4 cm thick. 220 volt connection, can also be converted to 380V. Gedwistete coconut fiber stricke can be processed into loose fibers. Top runs the knitting pure, is turned up and fall down the loose fibers out. Fully functional.

Year of construction : 1983 / 2003 Oven and burner renewed Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air fan: 8,000 m3/h; 4.0 kW; 1500 rpm Location : Camp Herzogenaurach Sales price: € 2,900,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Built: 1998 Dimensions: 1.15 m x 0.8 m x 2.5 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Umluf fan: 8,000 m3/h; 4.0 kW; 1435 rpm Location : Warehouse Room Herzogenaurach Sales price: € 2,990,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

3 Qty.1 Second-hand Tube Expander Unit Built: 2012 Model: ABO Tube diameter: 500 mm-2540 mm

Posts to Erico Cadweld Welding Metal for the production of welding connections between copper cables e.g. for grounding cables, lightning conductors Special price

Unused gearboxes, angular gearboxes, partly without electric motors, partly with electric motors. Manufacturers e.g. PWH Plants + Systems GmbH These types and others pre-raetig: 1. PWH 90KW Type K2SZG250 n1=1500 rpm n2= 75 rpm i=20 P=90 KW Length over everything: 120cm Width over all approx. 55cm Height approx. 56cm Diameter of shaft rear (lies laengs) 45mm Transducer of the shaft front (lies transverse) outside 160mm Transducer of the shaft front (lies transversely) inside 140mm Weight-cooked 1,000kg 2. PWH 45KW Type KSZG200 n1=1470 rpm n2= 73.5 rpm i=20 P=45 KW All over: 94cm Pq7hwm Width over all approx. 45cm Height approx. 46cm Diameter of shaft rear (lies laengs) 50mm Transducer of the shaft front (lies transverse) outside 150mm Transducer of the shaft front (lies transverse) inside 120mm, passage 100mm Weight-cooked 600kg 3. PWH 37KW Type KSZG180 ...

Laser marking laser marking system, Manufacturer GSI Lumonics Type XYMark, consisting of laser and suction. Geraet untested More information on request Special price

Electric pumping system for oil or diesel for controlled extraction of oil quantities from large containers such as oil barrels, tanks, etc. Consisting of electric motor with pump, pressure monitor, hose reel, pump gun with manual pass counter with rigid outlet. Display of the extracted quantity in litres Electric pump for fresh oil supply, suitable for barrel removal or as a tank pump, Closed hose reel for oil, hose length xxm xx" hose, with wall mount and pump gun. Special price

; neu, sofort lieferbar