other machines and plants used for sale (14,194)

Manufacturer: Riedhammer Model: DRA 6/40 temp.: 1150°C electrically heated. Installed connected load: approx. 145 kW 6 control areas Plant is as good as new. Almost no operating hours. At call.

Balance range: 1500 g Temperature range: 5° - 40° C Mains connection: 220 V, 50 Hz

Balance range: 1500 g Temperature range: 5° - 40° C Mains connection: 220 V, 50 Hz

Balance range: 300 g Temperature range: 10° - 40° C Mains connection: 220 V, 50 Hz

Rolls 0.5m x 20m 1.5m x 20m 2.0m x 20m 2.5m x 20m 3.0m x 20m 9,50€ / SQM

Schatz Advanced screwdriving system Schatz screwdriving system Length: 5450 mm Height: 3000 mm Roll-off block Length 5020 mm 2 x Demag crane 1 x Liftket electric chain hoist 1 x Treasure 907500 System without Advantech TPC-1260 TE Touch Panel PC Item location: 42859 Remscheid Disassembly and transport by the buyer. The disassembly, loading, as well as transport can alternatively be offered by us. Find more screwdriving systems in other sizes - new and used -

Wenzel roughness and contour measuring station for crankshafts Measuring plate made of hard rock Length: 3670 mm Width: 850 mm Flatness tolerance according to DIN 876/1 Target value 48 μm Actual value 32 μm Ident No.: 14280 JFA Dispensing Blocks Item location: 42859 Remscheid More measuring plates in other sizes - new and used - can be found in our shop! International shipping costs on request!

Sat B2599A drawer oven 130 °C If very different products or product lines with equally different tempering times are to be treated independently of each other in the smallest space, drawer ovens are the smartest ergonomic solution. Data of the furnace Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven External dimensions of the furnace Width with control cabinet: 2500 mm Depth: 1700 mm Height: 2250 mm Usable volume in every drawer Width: 1200 mm Depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in usable volume, at stabilized state: +/-3°C at 80°C Frame: The basic structure consists of an unalloyed steel girder structure, on which the exterior lighting made of unalloyed steel painted in RAL 1013 (pearl white), applied. The furnace inner housing is made of aluminized sheet steel  ...

Make : Wolf Built in : 1988 Dimensions : 4.1 m x 7.1 m x 3.0 m (approx. WxLxH) Supply air cover : Filter ceiling Lamps : 2 x 4 pcs. Recessed luminaires of 4 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 2 x 0.65 m x 2.0 m (approx. WxH) left+right Roller door : 6.0 x 2.3 m (approx. WxH), laterally between paint booth and dryer Rusting : Whole surface grating 12 pcs 1420x640 mm, 12 pcs 1300x525 mm, support rod 640x40x3 mm, 525x40x3 mm Additional equipment : pneumatic lift, JAB, 2,5 t, 11 bar, Remark : Panels in the lower area rusty Heating unit : 300 kW, gas burner Drying temperature: 80 degrees C Supply air unit: 22,000 m3/h; 7.5 kW Exhaust air unit: 21,000 m3/h; 5.5 kW Piping : supply and exhaust pipes, deflector hood, etc. Electrical : Control cabinet

Used storage tanks VARIBOX - 1.000 L - double-walled - with plug-in system and recesses for forklifts - Capacity: 1,000 L -Plastic - tested and cleaned - for diesel, oil or other liquids Discount possible for higher quantities. Inspection and shipping costs after consultation.

TUBULAR radiator in alluminium that can be used at 30bar. Complete line. We have a full production line for radiators to sell. We want to sell all the line, not a single machine. Inattached also the final product, radiators in alluminium in 3 difefrent measures and different hight.

Mahr 865 SE Indicator Calibrator Mahr 865 SE indicator calibrator with 1505 IC indicator + 1299 IC/S printer Height-adjustable table More indicator calibrators in other sizes - new and used - can be found in our shop! International shipping costs on request!

Zippel crankshaft cleaning system Zippel Crankshaft cleaning system L x W x H = 3520 x 520 x 700 mm Item location: 42859 Remscheid Further cleaning systems in other sizes - new and used - can be found in our shop! International shipping costs on request!

Offer up to 2 plasma power supplies here. Technical data, as shown in the picture.

BHT INNOVA E3 Professional Bronchoscope Washing Machine INNOVA – Professional endoscope washing machine for practices and small clinics The INNOVA™ E3s is the world's best-selling BHT endoscope washing machine. This endoscope washing machine is compact, offers a high capacity for endoscopes or bronchoscopes. Depending on the treatment, a total of 10 to 20 endoscope reprocessings are possible daily. This makes it the perfect solution for general practitioners and small clinics that value safe hygiene, efficiency and reliability. Item condition: used

Oven, wood chip stove, biomass stove, boiler used Manufacturer: MAXXTEC Type: IT-A-550-100-V Year of construction 2001 550 kW 350°C 540 l Diameter approx. 1700 mm Dimensions: approx. 3000 x 1700 x 4500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Gearboxes, spur gear units used HANSEN Type: D743CT3 Translation i: 203 Shafts approx. Ø 50 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Gearboxes, spur gear units used HANSEN Type: D753CT Translation i: 453 Shafts approx. Ø 38 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

UNI-KK 0-031-500 Dimensions: Cylinder length: 9.97 m Diameter 2.50 m Total length: 10,80 m Material: Material: Steel Tank above: - with manhole Dom 600 - with 2 crane eyelets - Leak control system with leak connections complete - with ventilation Cylinder: - 2 saddle plates - with Klöpperboden

-Manufacturer: KRONES -Type: Belt Conveyor Unit 180° -Year of manufacture: 2015 -Outside length: ~5000 mm -Width (ø): ~3000 mm -Belt width: 860 mm -Condition: Excellent

Roche MagNA Pure LC Nucleic Acid Preparation Station Manufacturer's description, all information without guarantee. Performances Save time with fast, fully automated isolation of high-quality DNA, RNA and mRNA. Get reliable, reproducible results. Benefit from high flexibility in sample type and volume as well as elution volume and post-elution processes. Benefit from the software-supported setup of reagents and disposable items. Automated pipetting of PCRs into LightCycler ® capillaries (LightCycler ® sample carousels), LightCycler ® 480 multiwell plates (96-well), PCR plates or strips or tubes. Product The MagNA Pure LC instrument is a benchtop device for fast, cross-contamination-free nucleic acid preparation and PCR setup. A fully enclosed housing, automatic clot and tip loss detection, and sample tracking make the MagNA Pure LC instrument a true "walk-away" instrument ...

Siemens Simodrive 6SC6600-4GA00 outdated 462600.9060.00, 6sc66004ga00 Central Assembly Shipping with parcel shipping.

GBS test pulse rev3 pulse generator for long-term insulation tests The test pulse structure is intended for long-term insulation tests on test specimens of up to 6 nF capacity. Inverter for high-voltage test transformer · Internal sine wave generator: 50-200Hz. · Pulse width modulation 16-24kHz of the sine over full bridge. · Inverter voltage 0-600V adjustable, Imax=2.6A, maximum power 1.3kW · Pulse current limit 110A (cut-off threshold) Pulse transformer – control · Control via full bridge · Full bridge power supply adjustable 0-1000V, 1.3A max. · Pulse current limit 100A (cut-off threshold). · Pulse width 20-120μs, nominal 94μs, adjustable · 2 selectable series inductors 150μH, 300μH to adjust the pulse width or rise times to load capacitance and voltage. · Pulse repetition rate 0.1 – 2.5 kHz, adjustable. · Polarity: Adjustable positive, negati ...

Paint shop Memmingen: Paint booth, special size: Make : LUTRO Year of manuf.: 1995 / 2017 - new units and pipelines, LED lighting, etc. Dimensions : 5.6 m x 9.48 m x 4.7 m (approx. WxLxH), total height 5.5 m Supply air blanket : Filter ceiling Lamps : 2x4 pcs LED inclined recessed luminaires + 2x3 LED wall recessed luminaires on the side Entrance side : Roller shutter 5.3 m x 4.2 m (approx. WxH) Exit side : Sliding gate (fire protection gate) is not included in the scope of delivery Escape door: 3 pieces: 0.95 m x 3.0 m; 0.95 x 2.0 m; 0.75 x 2.0 m (approx. WxH) Rusting : without rusting, without substructure, we have ev. Grates in stock Heating unit : approx. 250 kW, gas surface burner Energy saving: Heat recovery Dry temperature: 80 degrees C Supply air unit : approx. 22,000 m3/h Exhaust air unit : approx. 22,000 m3/h Pipelines : supply and exhaust air pipes, deflec ...

Ultra freezer, freezer, freezer used Manufacturer: NEW BRUNSWICK Type: U725 -86 Model: U9440-0001 Temperature range down to -86 ° Net capacity: 725 l 3 compartments approx. 860 x 420 x 600 mm (WxHxD) Stainless steel lining 230 V Total dimensions: approx. 1100 x 900 x 2100 mm

Qty. 1 Second-hand 4-Hi Non-Reversing Rolling Mill – still in operation! Mfc.: Lheung-Maschinery, Yushin Heavy Electric, Mitsubishi Built: Not specified! Rebuilt: 2017.08 Material: Aluminum & Aluminum Alloy Line speed: 80 m/min. Strip width: 550 mm Thickness: 0.3 – 6.3 mm Coil size: ID 508 mm OD 1500 mm Weight:

Offer here a large vacuum slider from VAT, Model: F19-107685/1 He sealed a Leybold CoolVac 10000, which can also be purchased as an option.

Air chiller for rooms or machines Power supply 380V, 50Hz Refrigerant R410A Input power approx. 5 kW Cooling capacity approx. 13 kW Cooling air volume 2,000 m3/h

Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capacity: 30 Plates/h Entry Material: Slab T130~300 mm x W1,200~2,200 mm x L2,350~4,000 mm Final Product: Plate T5~180 mm x W1,200~4,100 mm x L max. 25 m Application: Ship building plate & Pipe pro ...

Explosion protection valve VENTEX-ESI-E single-acting, DN200, Type5-A/N/P3 vertical or horizontal installation Passive without control and external energy Approved and certified safety technology from Switzerland