other machines and plants used for sale (14,189)

B 60 W BP CAN (ROLLER) walk-behind scrubber drier  The B 60 W Bp Can walk-behind scrubber dryer is equipped with a travel drive, a maintenance-free 120 Ah battery (2 pieces) and a user-friendly key system. This system enables simple and safe operation by regulating access and operating rights to protect against misuse. The machine is ideal for cleaning textured floors and can cover areas up to 2,500 square meters. The brushes are quick and easy to install and replace. Thanks to the eco!efficiency level, the battery life is significantly extended, and the integrated tank flushing system makes it easier to clean the dirty water tank after floor cleaning. Trailing scrubber drier (60 l) with travel drive.  Ideal for 1000 - 2500 m².  Energy-saving eco! - efficiency level Proven double disc technology ■ Brush heads are quickly mounted or replaced. Powerful drive ■ Comfortab ...

A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement.

Offered is a cleaning system for assemblies in electronics manufacturing: Functions: injection flooding with compressed-air support, vacuum drying, 100% recirculation (closed loop), MPC-cleaner compatible. Technical data: cleaning tank 80L, rinsing tanks 2x 60L. Stainless steel construction. Dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 700kg, including operating manual, data sheet, CE declaration. Viewing possible by arrangement.

Description 3,000 litre tank of RT water 04-B-100 4.000 liter tank acid 03-B-100 4,000 litre tank lye 02-B-100 2,000 litre tank of fresh water 01-B-100 2 x Soaking tank 27 m3 Material: 1.4301 Weight: approx. 2000 kg Service conditions: Inner container druchkos, 20°C when cleaning 85°C Execution: Surface inside bright rolled III c Surface outside of polished III c Seams sanded inside Ra < 0.8 μm, except fillet welds Seams stained and brushed on the outside N11 1 Piece DN 200 DIN 11850 Spout N10 1 piece DN 65 drainage nozzle with strainer N9 N8 N7 Company Sign N6 1 piece DN 25 DIN 11850 Cable conduit (ends flared) N5 1 piece DN 50 DIN 11850 inlet N4 1 piece DN 500 manhole with limit switch Schmersal N3 2 pieces level sleeve N2 1 piece DN 25/65 CIP removable N1 1 piece DN 250 Vent with vapour drain 2 x hot water tank 15 m3 Material: 1.43 ...

Properties Volume 9400 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4000 mm Height 3000 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Topsoil: 3 % inclined cone base Manhole round DN400 2 crane eyes with DN50 filling line pulled downwards Tank cylinder: Vapour trigger top DN100 left Ladder hooks Sample tap 5/8" Dip shaft sleeve with temperature display digital Clear drain with flange DN100 Subsoil: 3 % inclined cone base Forward-pulled residual drain pipe with flange DN100 4 profiled feet with domes, height-adjustable with washers

Properties Volume 10000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4000 mm Height 3000 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 1200 kg Description Topsoil: 3 % inclined cone base Manhole round DN400 2 crane eyes with DN50 filling line pulled downwards Tank cylinder: Vapour trigger top DN100 left Ladder hooks Sample tap 5/8" Dip shaft sleeve with temperature display digital Clear drain with flange DN100 Subsoil: 3 % inclined cone base Forward-pulled residual drain pipe with flange DN100 4 profiled feet with domes, height-adjustable with washers

Properties Volume 9400 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4000 mm Height 3000 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Topsoil: 3 % inclined cone base Manhole round DN400 2 crane eyes with DN50 filling line pulled downwards Tank cylinder: Vapour trigger top DN100 left Ladder hooks Sample tap 5/8" Dip shaft sleeve with temperature display digital Clear drain with flange DN100 Subsoil: 3 % inclined cone base Forward-pulled residual drain pipe with flange DN100 4 profiled feet with domes, height-adjustable with washers

Properties Volume 10000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4000 mm Height 3000 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 1200 kg Description Topsoil: 3 % inclined cone base Manhole round DN400 2 crane eyes with DN50 filling line pulled downwards Tank cylinder: Vapour trigger top DN100 left Ladder hooks Sample tap 5/8" Dip shaft sleeve with temperature display digital Clear drain with flange DN100 Subsoil: 3 % inclined cone base Forward-pulled residual drain pipe with flange DN100 4 profiled feet with domes, height-adjustable with washers

Properties Volume 22300 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4300 mm Height 2370 mm Diameter 3000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2500 kg Manufacturer: Gross Built in 1994 Overpressure 2.5 bar Working temperature 20°C

Operating pressure: 500 bar, Year of construction 2019 Flow rate: 15 l/min, hot water, Drive: Deutz Diesel 15 kW, Operating hours: approx.: 195 h, Trailer incl. accessories, HD pistol + lance

Properties Volume 12850 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4600 mm Height 2000 mm Diameter 2400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2500 kg Manufacturer: Gross Built in 1994 Overpressure 2.5 bar Working temperature 20°C Description Topsoil: Clapper bottom Downward-swept filling line DN50 CIP Cleaning Pressure fitting Tank cylinder: Cooling coil Ladder hooks Sample tap 5/8" Clear drain with threaded weld-on nozzle DN65 Level Indicator - Hose Subsoil: Clapper base 60° with cooling pipes Residual drain thread neck DN32 Conical flange DN 600 with outlet DN80 with disc valve 4 profiled feet with calottes height-adjustable

Properties Volume 22300 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4300 mm Height 2370 mm Diameter 3000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2500 kg Manufacturer: Gross Built in 1994 Overpressure 2.5 bar Working temperature 20° C

Properties Volume 8100 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 3 Total height 3400 mm Height 2250 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 1000 kg Manufacturer: Gross Built in 1993 Working temperature 20° C Description Topsoil: Cone bottom with 3% slope Threaded nozzle DN65 central Manhole round 440 Tank cylinder: Ladder hooks Sample tap DN15 Dip shaft sleeve with thermometer analogue Clear drain with disc valve DN80 Sewage DN100 Subsoil: Inclined cone base 3%Bevel forward-drawn residual drain pipe with disc valve DN40 3 profile feet with calottes height-adjustable

Properties Volume 8100 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 3 Total height 3400 mm Height 2250 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 1000 kg Manufacturer: Gross Built in 1993 Working temperature 20 C Last Use: Chemical Industry Description Topsoil: Cone bottom with 3% slope Threaded nozzle DN65 central Manhole round 440 Tank cylinder: Sample tap DN15 Dip shaft sleeve with thermometer analogue Clear drain with disc valve DN80 Sewage DN100 Subsoil: Inclined cone base 3%Bevel forward-drawn residual drain pipe with disc valve DN40 3 profile feet with calottes height-adjustable

Properties Volume 8100 L Material V2A (AISI 304) 1.4301 Vertical design Number of feet 3 Total height 3350 mm Height 2500 mm Diameter 2200 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2000 kg Manufacturer: Gross Built in 1993 Working temperature 20 C Isolated design

Properties Volume 8100 L Material V2A (AISI 304) 1.4301 Vertical design Number of feet 3 Total height 3350 mm Height 2500 mm Diameter 2200 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2000 kg Manufacturer: Gross Built in 1993 Working temperature 20 C Isolated design Description Topsoil: Cone bottom with 3% slope Threaded Socket DN50 Manhole 500 round Tank cylinder: Insulation 10 cm Ladder hooks Dip shaft sleeve with thermometer analogue Sewage DN100 Vapour trigger DN100 top Subsoil: Inclined cone base 3%Bevel Forward-drawn residual drain pipe DN120 3 feet with domes, height adjustable

Properties Volume 30250 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 7200 mm Height 5600 mm Weight 1800 kg Diameter width 2500 mm Surface inside 2B=IIIC ground Surface marbled on the outside Description Topsoil: Clapper bottom 2 crane eyes Threaded weld-on nozzle DN 100 centrally on DN 40 with threaded nozzle DN 50 with airlock valve DN 50 with check valve DN 50 Sprinkler ring Tank cylinder: Level indicator with bar and scale and standpipe valve DN15 Manhole 420x320 mm Sample tap DN 15 Ladder hook at the top Dip shank sleeve for temperature display Downward-swept CIP cable with DN 40 vent line with DN 50 connection thread Clear drain with angled seat valve DN 50 Cooling line CIP Ball Subsoil: Clapper bottom Forward-drawn floor bead with angled seat valve DN 50 and outlet pipe DN 50 with flange  ...

Properties Total height 4900 mm Depth 4000 mm Width 5200 mm Manufacturer GEA/ Tds Ahaus Type 1500 Machinery No. 36001027.15.1 Year of construction 2003 Description CIP Appendix No.6 Tank volume and dimensions: CIP Tank 1 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 2 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 3 Volume: 1,000 litres Length: 1,100 mm Width: 900 mm Height: 1,000 mm CIP Tank 4 Volume: 1,900 litres Length: 1,100 mm Width: 900 mm Height: 1,950 mm

Description Vetter Rotomax Turning Crane 80 to Details Type Rotomax Vetter Rotomax Load Turning Crane 80 to Machine no. 003074/1 Year of construction 2000 Load capacity 80,000 kg Net weight: 12,200 kg Wheel distance 1,600 - 6,000 mm Angle of inclination of the turning devices ß = 20 Max. torque 95,000 Nm Rotation speed 1.9 m/min Voltage UB 400 V 3 AC Control voltage Ust 24 V 1 AC incl. new slings and used slings incl. radio remote control

Batch mixer with a gross volume of 300 l. (max. usable filling: approx. 200 l.), part in contact with the product in stainless steel V4A, centrifuge equipped with ploughshares, drive via geared motor with 7.3 kW (pole-switchable for 2 speeds), equipped with a cutter head with 4.0 kW (speed approx. 3,000 rpm). Incl. push-button control cabinet and base; Outlet flap manually operated. All tools in very good wear condition.

A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible.

Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible.

A Dr. Fritsch segment soldering machine for the automatic soldering of segments (typically diamond segments) onto carrier tools is available. An on-site inspection is possible.

2x Defibrillator – used - : Price per unit: 450.-€ (net) Manufacturer: defibtech Type: Lifeline view Year of Make: 2014 Condition: good Available: immediately Location: 88448 Attenweiler

Several air cushion machines activaTec are available. Production speed: 15m/min, film thickness range: 13mm-40µm, roll length: 700m/1500m. Machine dimensions X/Y/Z: approx. 315mm/300mm/315mm, weight: approx. 10kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The picture shows an example unit.

Screw clamps, pipe clamps, pipe fastening -Size: Ø 108 to Ø 114 mm -Price: per package -Number: 4x packages available -Weight per package: 5 kg

Filter (Air Filter) -Type: MS 246 ALR -Dimensions: 305/305/H246 mm -Weight: 40 kg

Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Boring/chiselling -SDS Plus: recording -Transport case -Weight: 5 kg

two-armed drill, rotary drill, magnetic drill -Recording: MK2 -Nominal consumption: 150 W -Connection: 230 volts -Transport case -Dimensions: 350/300/H100 mm -Weight: 5.5 kg

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter-Air filter housing-Inlet/outlet: Ø 60/61 mm-Dimension: Ø 166/450 mm-Dimensions bracket: see photo-Weight: 4.45 kg