We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Type of machinery
(Quantity: > 4)
Manufacturer:
(Category: 1300)
used
45 cm cutters. Ideal for cutting wires, ropes, cables and bolts. Auction-ID: A7-50796-98
used
Wacker Neuson DT23 tracked dumper – 2019 – 2,300 kg payload Specifications: Brand/type: Wacker Neuson DT23 Year of construction: 2019 Serial Number: FC05437 Engine: Kubota V1505, 4-cylinder diesel engine Engine output: approx. 18.5 kW / 25 hp at 2,300 rpm Drive: hydrostatic Travel speeds: approx. 3.7 and 7.5 km/h Maximum slope: approx. 27% Payload: approx. 2,300 kg Bucket capacity: approx. 1,100/1,400 litres Tipping bucket: can be rotated approx. 180° Maximum tilt angle: approx. 85° Maximum tipping height: approx. 547 mm Dimensions l × w × h: approx. 3,304 × 1,312 × 2,523 mm Height with the bracket folded down: approx. 2,163 mm Ground clearance: approx. 160 mm Tracks: approx. 270 to 280 mm wide Transport weight: approx. 2,190 kg CE marking available Features: Hydrostatic drive Joystick control Two travel speeds Flip-up ROPS safety bar Approx. 180° rotatable loading and tipp ...
used
45 cm cutters. Ideal for cutting wires, ropes, cables and bolts. Auction-ID: A7-50796-198
used
Quick-release plate holder from W03 - 418 As good as new Auction-ID: A1-50849-525
used
Equipped with lifting device; suction arm; Attention, malfunction in control box; Auction-ID: A1-47394-217
used
Equipped with hydraulic cutting arm; floor chain; horizontal dosing rollers; Auction-ID: A1-47394-279
used
HSL1200 7.10 MS08 Screening Bucket 1200 mm Mount: MS08-Symlock Excavator Class: 7-10 Ton Working width: 1200mm Depth: 861mm Weight: 320 kg Volume: (SAE) 400 L Base body made of S355 Cutting edge made of HB400 Tooth system CAT3200, bolted, No smooth cutting edge: 6 pieces Round rods: 16 pieces Ø Round bars: 20mm Auction-ID: A1-50852-906
used
Pneumatic hose wound on a hose reel made of high-quality reinforced PVC. It is characterized by high resistance to high pressures. The hose reel is equipped with an automatic locking system that prevents unintentional winding of the hose and a hook that allows it to be hung on the wall. Auction-ID: A7-50796-6
used
The car is still being driven, so the mileage will deviate Auction-ID: A1-47422-205
used
Operation unknown Auction-ID: A1-47449-21
used
Note: The items offered are sold by us unchecked. No functional or technical tests have been carried out. Therefore, we cannot provide any information on function, completeness or technical condition. Traces of use and defects are possible. We expressly point out that a prior inspection of the items is strongly recommended in order to get an idea of the condition and scope of the goods offered. Auction-ID: A1-51029-37
used
Electric windows + mirrors, cruise control with limiter, steering wheel control, air conditioning, radio CD with Bluetooth, black headliner, half leather upholstery, rear isofix Auction-ID: A1-47422-207
used
Mercedes 200d; road tax free; leather upholstery; skylight electronic; all around new brakes + pipes; and had a major service; account present! Auction-ID: A1-47394-183
used
used
Häner pulverizer HPX1200 without pick-upPrimary and secondary demolitionFor carrier device from 12-18 t360° hydraulicrotation the hydraulic rotation enables high accuracy and flexibility in workOpening width: 670 mmreplaceable tooth plates made of HB450interchangeable knives made of HB600 Overall height: 1200 mmOverall length without mount: 1740 mmClamping force rear: 90 tClamping force front: 55 tOperating weight with pick-up: 1160 kgOperating pressure open/close: 270-300 bar Open/close oil flow rate: 70-120 l/minOperating pressure rotation: 70 barOil flow rate rotation: 15-20 l/minHose rotation size: 3/8 inchHose close/open size: 3/4 inch Auction-ID: A1-50852-410
used
Equipped with roll bar good working condition Auction-ID: A1-47394-120
used
Backhoe bucket with teeth 700mm, mechanical quick coupler, extra hydraulic function, swing boom, sliding blade, steel tracks with rubber pads, 2nd travel speed, converted to hand throttle control Auction-ID: A1-47394-62
used
Häner Excavator Rake HBR1200-MS01 Excavator class: 0.8 - 2 t. Made of high-quality, low-wear steel Width 1200 mm Recording: MS01 Tine length: 200mm Tine width: 10mm Tine spacing 74 mm Number of teeth 15 Weight: 55 kg Auction-ID: A1-50852-1740
used
Equipped with: Stainless steel storage boxes side, extra low platform middle, 3 PBW Axles, NL registration, folding piece rear, rear support points, bicycle catcher, hydraulic folding rear, wabco air system, steering axle, lift axle, remote control for tailgate Auction-ID: A1-47422-52
used
Manitou BT 420 4x4 telehandler – 2,000 kg – 4 m – 2013 – NL registration Compact and manoeuvrable Manitou BT 420 telehandler, built in 2013, with 4,559.9 operating hours. Equipped with 4x4 drive, telescopic boom and Manitou quick-change mount. The machine has a maximum lifting capacity of approx. 2,000 kg and a maximum lifting height of approx. 4 m. Specifications: Brand: Manitou Type: BT 420 Year of construction: 2013 Operating hours: 4,559.9 hours, read Fuel: diesel Drive: 4x4 Maximum lifting capacity: approx. 2,000 kg Maximum lifting height: approx. 4,000 mm Transmission: hydrostatic Steering: hydraulic Quick coupler: Manitou mount Features: Telescopic Extendable Boom 4x4 drive Hydraulic lift and tilt function Manitou quick change holder Open driver's seat with safety construction Windshield with windshield wiper Overhead guard Driver's seat Front work light Beacon Exterio ...
used
Working, Hydro hoses, 2 hydraulic cylinders, Euro confirmation, Auction-ID: A1-47394-200
used
Miscellaneous emergency lighting, leftover stock (unused): Eaton/CEAG – 40071354481 – GuideLed SL 13021.1 CG-S – 14 pieces Eaton/CEAG – 2850416331 – Emergency lighting fixture escape route lighting – 8 pieces Eaton/CEAG – 40071354894 – Outdoor Wall CG-S – 9 pieces Eaton/CEAG – 40071354480 – GuideLed SL 13011.1 CG-S – 1 piece Eaton/CEAG – 40071353480 – GuideLed SL 13041 CG-S – 3 pieces Eaton/CEAG – 40071356735 – GuideLed SL 13041.2 CG-S – 2 pieces Eaton/CEAG – 40071354483 – GuideLed SL 13022.1 CG-S – 5 pieces Eaton/CEAG – 40071354482 – GuideLed SL 13012.1 CG-S – 7 pieces Thorn – 96637629 – VOYAGER SOLID MS E1/3-S WH – 4 pieces Thorn – 96637597 – VOYAGER BLADE 2 115 MS E1/3 WH – 9 pieces Taurac – A103 – Basic - Tokyo – 17 pieces Auction-ID: A1-47449-77
used
1/2\" electric impact wrench complete with 17, 19, 21 and 22 mm CrV steel sockets. Thanks to the LCD display, the screwdriver allows you to adjust the tightening torque between 150 and 350 Nm, while when unscrewed the torque is 500 Nm. It is electrically powered, so it does not require a compressor. The screwdriver is perfect for use in mechanical workshops and domestic garages. Auction-ID: A7-50796-18
used
Equipped with built-in power supply. Flight case for presentation is not included. Auction-ID: A1-47449-18
used
Power windows and mirrors, electric folding mirrors, steering wheel controls, cruise control, air conditioning, heated seats, automatic gearbox, tow bar, extra set of wheels, window torn Auction-ID: A1-47422-216
used
Mechanical tools for crimping PEX pipes are used for aluminum-plastic pipes, PEX pipes, PB pipes, and pipes to be connected with copper pipes and joints, as well as for clamping stainless steel sleeves, copper sleeves, aluminum sleeves, etc. Auction-ID: A7-50796-232
used
The air grinder is a great tool for grinding/grinding, deburring, shaping/milling, and engraving on a variety of different materials. Auction-ID: A7-50796-196
used
KT276 / KT316 / 2706 / 3106 \"Edge corrosion, damage, safety markings, paint, faded\" Auction-ID: A1-50849-460
used
Häner Sorting Grapple HSOGx7.10 black satin matt for mini excavators from 7 - 10 t Opening width: 1,320 mm Shell width: 555 mm Overall height open without drive: 827 mm Clamping force: 24 kN at 300 bar Max. operating pressure on/off: 300 bar Net weight with swivel function: 400 kg without pick-up Number of hydraulic motors: 1 Min. oil volume on/off: 15 l/min Min. oil volume rotate: 10 l/min Size Hoses Close/Open: 3/8\" Turning Hose Size: 3/8\" Scope of delivery: - Operating instructions - Spare parts list - CE declaration of conformity Auction-ID: A1-50852-193
used
1 set of 4 pcs. Rim 24XDW14L IS 45 Profile: New Auction-ID: A1-50849-518