meat and fish processing machines used for sale (1,775)

Cooking trolley 1 x 1 x 2 meters with 5 to 8 floors with tray support

Treif Dicer Type Felix 100 With cutting set 24x24 mm Year of construction 2009 Other cutting set sizes on request

The Velati M 2000 twin shaft paddle mixer is a robust and reliable industrial device, specially designed for food processing in commercial kitchens or production facilities. This type of used mixer is characterized by its high capacity and efficiency in mixing a wide variety of ingredients. Thanks to the twin shaft technology, the M 2000 ensures even mixing of the materials while minimizing mixing time. The paddles are designed to ensure optimal mixing without excessive friction, which maintains product quality. The stable construction of the device offers long-lasting performance and lower maintenance requirements. Ideal for use in food processing, this mixer is a valuable addition to any company that requires high-quality and consistent mixes., power: approx.: 1,600 kg mixing volume, Dimensions / weight: Mixer: L x W x H: 4,650 x 1,500 x 1,950 mm, auger: L x W: approx. 5,100 x 2,000 mm ...

1 pump, made by Gardner Denver, built in 2019, 2 pump, made by Rietschle, built in 2002, 0.5 mbar (abs.), 300 m³/h, 5,5 kW, on 2 stainless steel frames,

Pallet lift table for industrial and Euro pallets, lifts whole pallets of frozen blocks to an ergonomic working height, enabling quick and injury-free operation for the machine operator., Pallet lift table for industrial and Euro pallets, Load capacity: 1,000 kg, Dimensions / weight: L x B x H: 1.850x1.230x2.180 mm, Weight: 520 kg

Control defective, Dimensions / weight: LxBxH: 2.200 mm x 1.200 mm x 2.000 mm.

Rotation autoclave, four-cage autoclave, full water system with rotation, autoclave diameter: 1100 mm, allowable operating pressure 6 bar, allowable operating temperature 200 degrees, content 3400 liters, with Siemens control and digital recorder Jumo., refurbished and inspected.

The Oxipack SLT is a state-of-the-art, non-destructive leak tester specifically designed for packaging inspection. It enables precise and fast leak detection without damaging the object being tested. This device is ideal for use in quality control and helps to ensure the integrity of packaging. With its user-friendly interface, the SLT offers straightforward handling and reliable results. The modern technology ensures high sensitivity and repeatability in leak testing, allowing even the smallest leaks to be effectively detected., This used unit, serviced by Oxipack as recently as November 2025, meets all required standards and is both durable and low-maintenance, making it a cost-effective solution for companies that need to conduct regular testing. The SLT is an excellent choice for any industry where tightness is critical, including the food, pharmaceutical, and packaging sectors., pow ...

High-performance, completely stainless steel automatic grinder for industrial applications., Ideal for meat processing, pet food, and other protein-based products. Available immediately., Used machine from Seydelmann, overhauled in 2025 and not in use since., Largely rust-free, 2-turn working auger, 3-turn feed screw, - With 200 mm diameter perforated discs, - Control cabinet installed, - Dual-stage thermal overload control, 1. Impulse reduces feeder speed, 2. Pulse switches off main motor, - Approx. 400 liter funnel, - Conical feed screw made of stainless steel, Special casting, perpendicular to the working screw, - Solid stainless steel worm housing with hardened running surfaces, - Stainless steel bayonet fitting, - Electrically locked spillage hand guard, - Rocker switch on the top edge of the funnel, - Machine stand closed at the bottom with ventilation system, Three-phase motor IP  ...

Pilot - autoclave for product development., Suitable for all known heat sterilization and pasteurization processes:, Full water, sprinkling, pure steam and steam - compressed air - sterilization, possibility of rotation, Dimensions of the space available for products in the cage: W x D x H: 260 x 320 x 182 mm, Electrical connection value: approx. 1.5 kW, with booster pump: approx. 3.5 kW, steam connection:, Connection value: approx. 250 kg/h,, Steam pressure: 6 bar overpressure, compressed air connection:, Connection value: 0.6 Nm³/h, 6 bar overpressure, Drainage: hot water resistant up to 160°C, Connection value: 50 ltr/min, Weight: approx. 900 kg, matching:, Electrically heated steam generator, make Certuss, year of construction 2005, Installation, approval and TÜV monitoring-free, Technical specifications:, Steam output: max. 97 kg/h, power reduced to 63 kg/h, Heat output: max. 72  ...

in operation for frozen and fresh fish,, Sorted part with 12 pushers, Power: 120 revolutions / min.,, Size of the sorting stations: approx. 400/300/250 mm (LxWxH), weighing unit: consisting of feed, weighing belt and discharge: 300/400/300 x 200 mm, with 12 ejectors installed in series (stainless steel - pneumatic cylinder FESTO).

Pickle injector / steaker, make Schröder, type NT 350, year 2001, with plastic link belt, width 600 mm

Useful length: approx. 1,000 mm, usable width: approx. 200 mm, sturdy stainless steel frame, mobile design, total dimensions (LxWxH): approx. 1,050 x 620 x 1,080 mm, new motor, new belt, belt speed: approx. 30 m/s. Length: approx. 1,100 mm, width: approx. 800 mm, height: approx. 1,100 mm = 08.06.20 dh

Kilia TK20 Table Cutter 20 litre solid stainless steel bowl 2 courses 6 mm cutter head Spare blade set and fork locks included 400V Stainless steel housing smooth and smooth running, video of test run available comes from a gastronomic business in which meat loaf was made with it

Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, older model, functional, smooth-running

Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, functional, smooth-running, very good used condition.

Handtmann VF 50 incl. turning device and complete accessories

Slicer Sharpen V330, Stainless steel housing, with new rubber feet, Connection 400 V, dimensions LxWxH approx. 60x62x45cm, weight approx. 53kg, good used condition, fully functional

A cooled table-top meat grinder Mado is available. Cutting set diameter: 82mm, Cutting set version: 3-piece Unger system, Motor power: 1.45kW, Motor speed: 2700rpm, Auger speed: approx. 210rpm, Throughput capacity: approx. 400kg/h, Tray volume: 6l, Machine dimensions X/Y/Z: approx. 550mm/550mm/500mm, Weight: approx. 90kg. An on-site inspection is possible.

Offered is an abdominal opener for poultry processing. Manufacturer: LINCO Food Systems (formerly Lindholst & Co A/S, now BAADER) / Tielemann Food Equipment BV, type 12 CW / 8 inch. Compatible bird sizes (live weight): standard broilers: 1.5-2.5kg, large broilers: 2.5-4.0kg, laying hens: 1.0-4.5kg, throughput: 6300 birds per hour (BPH), noise emission: below 80dB(A) at the workplace, machine dimensions (W/D/SM): 1380mm/1350mm/776mm, machine weight: approx. 550kg. Suitable for integration into industrial poultry slaughter and evisceration lines. Inspection possible by arrangement.

Maurer FKS 2000 Apollo boiling kettle, electrically heated in a glycerine bath, 200 liter capacity, external MC control and control box, with boiler float, core temperature sensor, replacement cover gasket, Connection 400V, 16.9kW, boiler inner dimensions LxWxD approx. 91x53x45cm, Total dimensions LxWxH approx. 140x84x102cm, weight approx. 390kg, Built in 1999, but hardly used, top condition, almost as new, checked by the bricklayer.

The pictured cutter is sold by MADO of the type Garant MSK760 H II with a volume of 35 litres. The cutter is made entirely of stainless steel, it has a 6 mm cutter head with an additional spare blade set and comes with an operating manual. The cutter has the following technical data: Bowl volume: 35 litres Number of knives: 6 Speed: 1750-3500 rpm Bowl speed: 12/24 rpm Knife shaft power: 9/11kW Voltage: 400V Fuse: 32A (slow-blow) Dimensions: 1240x890x1130H (1240x1260x1740H with lid open) Footprint: 1040x550mm Weight: 430kg Keys for the cutter head and documentation are part of the machine The machine runs neatly and smoothly, video of the test run available Only the noise protection cover has a crack, but this was professionally glued by the previous owner.

Stephan UM/SK 60 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Mounted on a stainless steel frame. The bowl is equiped with a double jacket for heating/cooling on the jacket, 2x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, cutting blade, maximum working pressure in the bowl -1/- bar (protected with overpressure valve), maximum temperature in the bowl 95 °C, maximum temperature in the jacket 95 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid with a hopper with a pneumatic valve for adding powders, mounted on the lid a scraper agitator for the wall, electric driven (0,37 kW - n2: 39 rpm), 1 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl  ...

The FrymaKoruma MZM/VK7 is a laboratory and product development–scale toothed colloid mill, emulsifier, vacuum mixer or homogeniser designed for efficient liquid–solid phase refining, homogenizing, dispersing and emulsifying liquid to highly viscous products. It is suitable for the production of creams, ointments, gels, similar formulations or food products. The unit was previously operated in a mayonnaise production facility. The machine is mounted on a stainless steel frame equipped with two wheels, allowing for easy mobility. It features a double-jacketed conical hopper with an approximate working volume of 10 litres. The hopper is fitted with a lid incorporating a scraper agitator (0.09 kW, 380/220 V), a pressure indicator (–1000 mbar to 0 bar), and an inspection light with glass wiper. Two small open side hoppers with manual valves are provided for ingredient dosing. The syste ...

The ROTOTEMP 1,5 is a scraped surface heat exchanger for cooling or heating various products, with a heat exchange surface of 1,5 m2. The heat exchanger consists of a jacketed outside cylinder and a jacketed internal cylinder. The outside jacket is insulated and finished with stainless steel sheeting. The product space is located between the two cylinders. A rotating cage with scrapers is fitted in the product space. The scrapers ensure proper mixing during the tempering process. Because the cylinders are scraped continuously, it is possible to cool crystallizing products without a product layer building on the walls. It is also possible to heat products without the danger of sticking to the walls. Thanks to these characteristics and the design of the installation, it is also possible to accurately perform heat exchange processes for products with high viscosity., Technical specification ...

The Karl Schnell Type 046 KS FV-SERIES Emulisifer is designed for the fine art of fine emulsion; premincing, vacuumizing, mixing and emulifying all in one machine. Designed for the production of small batches, this machine of the FV-Serie complete thus the versatile KS offer which result in a constant quality level of the final product, creating of stable and homogeneous emulsions, flexibile applications and high productivity. This machine is previously used in a processed cheese plant in Europe. Hopper inside diameter 550 mm and inside height 400 mm. Volume of the hopper: ± 30 liter. The hopper has a direct steam injection nozzle, double jacketed and can handle vacuum. Motor: 4,1 / 8,2 / 14 kW - 120 / 230 / 400 V - 32 / 31 / 31 A - 710 / 1.440 / 2.550 rpm - 26 / 50 / 87 Hz. Simple control panel with buttons., Type of Machine: Emulsifier, Volume hopper: ± 30 liter, Motor: 4,1 / 8,2 / 1 ...

Spare parts for different Stephan UMM/SK - TC/SK Universal machines. The lot of spare parts is existing out of:, - 4x Springs., - Several steam injection nozzles and components., - Temperature indicator., - Knife nut., - Several scraper blades., - Gummies., - 9x Used Stephan 80 knifes., - 2 New Stephan 80 knifes., - 2x Used Stephan 25 or 40 knifes., - 4x Manual clamps for fixing the lid., - Vacuum chamber., - Filler bushings Stephan TC/SK 600., - Part of a pneumatic outfeed valve., - 4x Sieve plates., Type of Machine: Universal machine

2x pieces of Unused Endress+Hauser PMP75 Pressure Transmitters., Order code: PMP75-3EX77/0, MWP 0.1/10 bar, p -1 ...10 bar, Mat. 1.4435/316L, Will be sold as a set only., Type of Machine: Pressure Transmitter

We are selling here a skinning fleece from the manufacturer Maja, type EVM 437 in a very good used and functional condition. Runs on 400 volts, cutting width 43 cm, completely stainless steel, rollable, workshop tested, ready for immediate use, dimensions W/D/H 70/70/100 cm, others on request.

PVS natural casing welding devices replace the knotting of the sausage ends or the closure of the sausages with a clip The system is suitable for natural casings, sheep casings and pig casings. The advantage to conventional applications is that there is no need to remove knots or clips before packing