meat and fish processing machines used for sale (1,815)

1 pump, made by Gardner Denver, built in 2019, 2 pump, made by Rietschle, built in 2002, 0.5 mbar (abs.), 300 m³/h, 5,5 kW, on 2 stainless steel frames,

FUX band universal washing system FUX 1-SAF-1 with steam heating – powerful conveyor dishwasher for baking sheets, Technical specifications, - Heating type: Steam 8.5 bar, - Operating voltage: 400 V / 50 Hz / 3 phases, - Direction of rotation: right / left, - Throughput width: 612 mm, - Throughput height: 440 mm, - Waschgut: Sheets up to 650 x 600 mm, - Performance: about 75 sheets/hour, ---------------------------------------------------------------, Equipment / Zone layout, Feed zone, - Inlet No. 1 with hood, 350 mm, Pre-wash zone, - Pre-wash tank S”, FTX tank, 900 mm, - 4 kW pump, - Side washing arm, Main washing zone, - Main wash tank A”, 1,400 mm, - Tell-Druckwaschsystem, - 2 x 2.3 kW pumps, - Tank heater HDD via injector, Clear rinse zone, - Fresh water clarification rinse zone F, 600 mm, outlet, - Outlet No. 1, 1,100 mm, Instantaneous heater, - With condensate guidance in A- ...

Pallet lift table for industrial and Euro pallets, lifts whole pallets of frozen blocks to an ergonomic working height, enabling quick and injury-free operation for the machine operator., Pallet lift table for industrial and Euro pallets, Load capacity: 1,000 kg, Dimensions / weight: L x B x H: 1.850x1.230x2.180 mm, Weight: 520 kg

Control defective, Dimensions / weight: LxBxH: 2.200 mm x 1.200 mm x 2.000 mm.

Rotation autoclave, four-cage autoclave, full water system with rotation, autoclave diameter: 1100 mm, allowable operating pressure 6 bar, allowable operating temperature 200 degrees, content 3400 liters, with Siemens control and digital recorder Jumo., refurbished and inspected.

The Oxipack SLT is a state-of-the-art, non-destructive leak tester specifically designed for packaging inspection. It enables precise and fast leak detection without damaging the object being tested. This device is ideal for use in quality control and helps to ensure the integrity of packaging. With its user-friendly interface, the SLT offers straightforward handling and reliable results. The modern technology ensures high sensitivity and repeatability in leak testing, allowing even the smallest leaks to be effectively detected., This used unit, serviced by Oxipack as recently as November 2025, meets all required standards and is both durable and low-maintenance, making it a cost-effective solution for companies that need to conduct regular testing. The SLT is an excellent choice for any industry where tightness is critical, including the food, pharmaceutical, and packaging sectors., pow ...

High-performance, completely stainless steel automatic grinder for industrial applications., Ideal for meat processing, pet food, and other protein-based products. Available immediately., Used machine from Seydelmann, overhauled in 2025 and not in use since., Largely rust-free, 2-turn working auger, 3-turn feed screw, - With 200 mm diameter perforated discs, - Control cabinet installed, - Dual-stage thermal overload control, 1. Impulse reduces feeder speed, 2. Pulse switches off main motor, - Approx. 400 liter funnel, - Conical feed screw made of stainless steel, Special casting, perpendicular to the working screw, - Solid stainless steel worm housing with hardened running surfaces, - Stainless steel bayonet fitting, - Electrically locked spillage hand guard, - Rocker switch on the top edge of the funnel, - Machine stand closed at the bottom with ventilation system, Three-phase motor IP  ...

Pilot - autoclave for product development., Suitable for all known heat sterilization and pasteurization processes:, Full water, sprinkling, pure steam and steam - compressed air - sterilization, possibility of rotation, Dimensions of the space available for products in the cage: W x D x H: 260 x 320 x 182 mm, Electrical connection value: approx. 1.5 kW, with booster pump: approx. 3.5 kW, steam connection:, Connection value: approx. 250 kg/h,, Steam pressure: 6 bar overpressure, compressed air connection:, Connection value: 0.6 Nm³/h, 6 bar overpressure, Drainage: hot water resistant up to 160°C, Connection value: 50 ltr/min, Weight: approx. 900 kg, matching:, Electrically heated steam generator, make Certuss, year of construction 2005, Installation, approval and TÜV monitoring-free, Technical specifications:, Steam output: max. 97 kg/h, power reduced to 63 kg/h, Heat output: max. 72  ...

used for frozen and fresh fish, sorting section with 12 pushers, Capacity: 120 weighings / min. Size of the sorting stations: approx. 400/300/250 mm (LxWxH), Weighing unit consisting of infeed, weighing belt and transport: 300/400/300 x 200 mm, with 12 ejectors installed in a row (stainless steel - compressed air cylinder FESTO).

Pickle injector / steaker, make Schröder, type NT 350, year 2001, with plastic link belt, width 600 mm

Useful length: approx. 1,000 mm, usable width: approx. 200 mm, sturdy stainless steel frame, mobile design, total dimensions (LxWxH): approx. 1,050 x 620 x 1,080 mm, new motor, new belt, belt speed: approx. 30 m/s. Length: approx. 1,100 mm, width: approx. 800 mm, height: approx. 1,100 mm = 08.06.20 dh

Kilia TK20 Table Cutter 20 litre solid stainless steel bowl 2 courses 6 mm cutter head Spare blade set and fork locks included 400V Stainless steel housing smooth and smooth running, video of test run available comes from a gastronomic business in which meat loaf was made with it

We are selling here a dishwasher from the manufacturer KBS, type 3505 AP in a very good used and functional condition. Runs on 400 volts, 7.9 kW, built in 2019, with base, 2 baskets, rinse aid and detergent feeder, lye pump and booster pump, workshop tested, immediately ready for use, dimensions W/D/H 60/60/83 cm, others on request.

We are selling here a vacuum tumbler from the manufacturer Günther, type GPA 200K in a good used and functional condition. The machine was built in 2009, runs on 400 volts, 1.5 kW, completely stainless steel, rollable, container tiltable, volume 200 liters, capacity 140 kg, programmable control, without cooling, workshop tested, immediately ready for use, dimensions W/D/H 175/82/160 cm, others on request.

We are selling here a curing injector from the manufacturer Rühle, type PR 15 in a very good used and functional condition. The machine runs on 400 volts, 1.1 kW, built in 2011, completely stainless steel, 15 needles, incl. hand sprayer, rollable, workshop tested, immediately ready for use, dimensions W/D/H 40/115/140 cm, others on request.

Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, older model, functional, smooth-running

Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, functional, smooth-running, very good used condition.

Handtmann VF 50 incl. turning device and complete accessories

Clipping machine Manufacturer: Technopack Easy and fast closure of artificial casings and natural casings in the caliber range from 25 to 75 mm. The loops can be attached automatically or manually. Dimensions: 1800x1300x700 mm Weight: 130 kg Operating pressure: 4-6 bar in function as back from customer

Slicer Sharpen V330, Stainless steel housing, with new rubber feet, Connection 400 V, dimensions LxWxH approx. 60x62x45cm, weight approx. 53kg, good used condition, fully functional

Slicer Bizerba VSI 330 F, Fully automatic machine on mobile base, built in 2019, Connection 230 V, dimensions LxWxH approx. 110x80x150cm, weight approx. 173kg, very good used condition, fully functional

We sell here a vacuum tumbler with cooling from the manufacturer Günther, type GPA 200K in a good used and functional condition. The machine was built in 2004, runs on 400 volts, 1.5 kW, completely stainless steel, rollable, container tiltable, volume 200 liters, capacity 140 kg, programmable control, workshop tested, immediately ready for use, dimensions W/D/H 175/82/160 cm, others on request.

A cooled table-top meat grinder Mado is available. Cutting set diameter: 82mm, Cutting set version: 3-piece Unger system, Motor power: 1.45kW, Motor speed: 2700rpm, Auger speed: approx. 210rpm, Throughput capacity: approx. 400kg/h, Tray volume: 6l, Machine dimensions X/Y/Z: approx. 550mm/550mm/500mm, Weight: approx. 90kg. An on-site inspection is possible.

Offered is an abdominal opener for poultry processing. Manufacturer: LINCO Food Systems (formerly Lindholst & Co A/S, now BAADER) / Tielemann Food Equipment BV, type 12 CW / 8 inch. Compatible bird sizes (live weight): standard broilers: 1.5-2.5kg, large broilers: 2.5-4.0kg, laying hens: 1.0-4.5kg, throughput: 6300 birds per hour (BPH), noise emission: below 80dB(A) at the workplace, machine dimensions (W/D/SM): 1380mm/1350mm/776mm, machine weight: approx. 550kg. Suitable for integration into industrial poultry slaughter and evisceration lines. Inspection possible by arrangement.

Maurer FKS 2000 Apollo boiling kettle, electrically heated in a glycerine bath, 200 liter capacity, external MC control and control box, with boiler float, core temperature sensor, replacement cover gasket, Connection 400V, 16.9kW, boiler inner dimensions LxWxD approx. 91x53x45cm, Total dimensions LxWxH approx. 140x84x102cm, weight approx. 390kg, Built in 1999, but hardly used, top condition, almost as new, checked by the bricklayer.

The pictured cutter is sold by MADO of the type Garant MSK760 H II with a volume of 35 litres. The cutter is made entirely of stainless steel, it has a 6 mm cutter head with an additional spare blade set and comes with an operating manual. The cutter has the following technical data: Bowl volume: 35 litres Number of knives: 6 Speed: 1750-3500 rpm Bowl speed: 12/24 rpm Knife shaft power: 9/11kW Voltage: 400V Fuse: 32A (slow-blow) Dimensions: 1240x890x1130H (1240x1260x1740H with lid open) Footprint: 1040x550mm Weight: 430kg Keys for the cutter head and documentation are part of the machine The machine runs neatly and smoothly, video of the test run available Only the noise protection cover has a crack, but this was professionally glued by the previous owner.

MADO MEW621 Ultra Automatic Mixer Grinder used Mixing tool and feed screws can be dismantled in seconds without tools B98 Unger Cutting Kit + Spare Blades and Various Discs mobile on wheels, two of them braked Safety shut-off on the lid, button for return Only the toggle of the main switch is missing, which does not harm the function Machine has an absolutely smooth and smooth run, video of the test run available

Stephan UM/SK 60 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Mounted on a stainless steel frame. The bowl is equiped with a double jacket for heating/cooling on the jacket, 2x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, cutting blade, maximum working pressure in the bowl -1/- bar (protected with overpressure valve), maximum temperature in the bowl 95 °C, maximum temperature in the jacket 95 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid with a hopper with a pneumatic valve for adding powders, mounted on the lid a scraper agitator for the wall, electric driven (0,37 kW - n2: 39 rpm), 1 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl  ...

This cheese dividing machine disposes of a manually rotated turntable. This offers the possibility to cut cheese loaves and rings in segmental portions (wedges) as well as cheese loaves and bars in sticks with freely selectable stick width. Diameter of the rotated turntable: 100 cm. Cutting knife length: 105 cm. The machine is previously used for Gouda cheese loaves, Butterkäse and Tilsiter cheese (1-2 kg loaves). Light screen protection (Sick). Control panel with PLC control. Spare knife available., Type of Machine: Cheese dividing machine, Capacity: up to 40 cuts/min, Max size of the cheese: 100 x 100 x 25 cm, Total dimensions: 260 x 155 x 230 cm

Simon Freres Butter bulk packing without kneading effect or damages to the structure. Automatic filling of butter into carton and cases between 5 to 25 kg. Currently this machine is set for carton boxes of 10 kg butter blocks. Dimensions of the forming head: 120 mm x 90 mm. Extrusion length of the block is adjustable on time. Feeding by a big volume feeding hopper with 2 large diameter augers / screws, all made out of stainless steel. Infeed conveyor and manually position the folded carton box in front of the extruder. Manual close the box and move it forward on the non driven outfeed conveyor. Motor: ± 3 kW - 380 V - 50 Hz. New simple control panel with universal timer for adding the dosing time, emergency stop and main switch. Manual available in French language., Type of Machine: Butter Packing Machine, Capacity: up to 1.500 kg of butter per hour (output), Motor: 3 kW - 380 V - 50 Hz ...