grinding machines wood used for sale (712)

car. Edge profile grinding machine Langzauner LZK-SD Machine from a small craft business Joinery dissolution due to retirement ex location net € 6.000,00 as seen

Long belt sanding machine Höfer Long belt sander Höfer approx. 1000 x 2500 mm Machine is FUNCTIONAL and ready for demonstration from PENSION/Handicraft business From the carpentry site, as seen NET € 1,500.00

Bench belt sander Höfer Motor 4.2KW format 2.50 x 1.20 meters

Long belt grinding machine, roller spacing approx. 3000 mm

Belt grinding machine for wood & metal, roller spacing approx. 3000 mm

Handcuper Meinert PH6 for gate saws

For sale second hand sanding maschine steinemann. Up and down paper, super wide, 200kw. 1990 yc. Short used.

Table sizes: 3000 x 850 mm.Motor: 3 kWBelt sizes: 150 x 7800 mm.Motorised height adjustment

Fine sanding machineWorking width: 1300 mm.Workpiece thickness: 3-140 mmN? of units: 2 Wide belt, CSD sanding pad, belt sizes 2620 x 1350 mm, 18,5 kW motor,0,5-12 m/s belt speed with freq. Controlls, belt cleaning Wide belt, CSD sanding pad, belt sizes 2620 x 1350 mm, 15 kW motor, 0,5-12 m/s belt speed with freq. Controlls, belt cleaningBrush cleaning unit scotch bride 250 mm diameter, 4 kWBrush cleaning unit 150 mm diameter, 1,5 kWFeedbelt speed 5 - 25 m/min, 1,5 kW motor, frequency controlWorking height 930 mm +/- 20 mmCarpet cleaning brushEA dedusting machine high-pressure blow-off system with rotating nozzles and ionization for statically charged dust

Usefull width: 1030 mm.Sanding belt sizes: 1060 x 1900 mm.Number of sanding units: 3 Roller 15 kW, Roller 15 kW, Pad 11 kWMax. pass in thickness: 200 mm.Feed speeds: 5 and 10 m/minMotor feedbelt: 2,2 kWPneumatic belt tensioning and oscillationMotorised height adjustment, motor 0,75 kW, readout up to 1/10 mm.Automatic thickness adjustmentrevision in 2017

Top and bottom sanderUsefull width: 435 mm.Sanding units top: Roller 7,5 kW, Pad 5,5 kW bottom : Roller 7,5 kW, Pad 5,5 kWSanding belt sizes: 455 x 1900 mm.Workpiece thickness: 5 - 200 mmMin workpiece length: 320 mm.Feed speed of the carpet: 8 and 16 m/min, motor 2,2 kW

Sanding width: 650 mm.Sanding belt sizes: 650 x 1900 mm.Number of sanding units: 2 Roller 11 kW, Pad 7,5 kWMax. pass in thickness: 200 mm.Feed speeds: 5 and 10 m/minMotor feedbelt: 2,2 kWPneumatic belt tensioning and oscillation

Useful width: 1030 mm.Sanding belt sizes: 1060 x 1900 mm.Number of sanding units: 2 Max. pass in thickness: 200 mm.Feed speeds: 5 and 10 m/minMotor feedbelt: 3 kWPneumatic belt tensioning and oscillationMotorised height adjustment, motor 0,75 kW, readout up to 1/10 mm.Automatic thickness adjustmentDiameter extraction: 250 mm.

Useful sanding width: 1100 mm.Sanding belt dimensions: 1110 x 1900 mm.Number of sanding aggregates: 3 Roller steel grooved 15 kW, Roller 70? shore 18.5 kW, Roller 50? shore Aggregate 2 & 3 with shared motorMax. sanding thickness: 150 mm.Throughput speeds: 2,5 - 11 m/minMotor through-belt: 0,55 kWHeight adjustment motorized, motor 0,26 kWAutomatic thickness adjustmentInput rollers length 700mmOutput rollers 1600mmTouchscreen

Sanding width 1350 mm.Workpiece thickness: 4 - 170 mmEquipped with 3 aggregates,1st steelroller, motor 22kW2nd roller 65? Shore, motor 15kW 3th Kombi unit, motor 12kW, combination roller with 45? Shore and pneumatic controlled sanding shoecleaning brush at outfeedElectrical height adjustment of the transport table.Pneumatic sanding belt tension.Sanding belt oscillation.Pneumatic sanding belt cleaningThroughput speed with variatorWorkpiece thickness measurementm with manual setting at the machine feedSanding belt dimensions: 1370 x 2620 mm5 rollers on in- and outfeed table

Wide belt sander with 2 unitsMax. working width: 910 mm.Panel transport by belt, 2 feed speeds, 4,5 / 9 m/minEquipment: Roller with motor 11 kW, 90? Shorelifting facility of first roller on control panel Combi unit with single belt over roller and pad, roller 45? Shoremecanical lifting of second rolleroscillation with infrared detectionelectro magnetic break main motors

Top/bottom calibrating line:Bottom sanderNumber of sanding units: 41. Steel roller with motor 55 kW2. Steel roller with motor 45 kW3. Rubber roller with 90 Shore, motor 30 kW4. Rubber roller with 90 Shore, motor 22 kW5. Cleaning brushVariable Feed SpeedVacuum workpiece suctionTop sanderNumber of sanding units: 41. Steel roller with motor 55 kW2. Steel roller with motor 45 kW3. Rubber roller with 90 Shore, motor 30 kW4. Rubber roller with 90 Shore, motor 22 kW5. Cleaning brushVariable Feed SpeedVacuum workpiece suction

1) sander top VEGA 311 MRLSanding width 1100 mm.Working thickness 3 to 160 mmworking height 950 mmSanding belt dimensions 1120 x 2620 mm.Equipment:1) cutterblock diameter 180 mm 22 kW 47m/s2) rubber contact roller diameter 220 mm 22 kW 18m/s3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off4) Finishing brush unit at output 0.75 kW diameter 150 mmfeed speed adjustable 2.5-13 m/min 3 kWpneumatic sanding belt tensionmotor height adjustment 0.75 kWextraction rate: 11800 m?/h2) bottom sanderVEGA U 311 MRFSanding width 1100 mm.Working thickness 3 to 160 mmworking height 920 mmSanding belt dimensions 1120 x 2620 mm.Equipment:1) cutterblock diameter 180 mm 22 kW 47m/s2) rubber contact roller diameter 220 mm 22 kW 18m/s3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off4) Finishing brush unit at output 0.75 kW diameter 150 mmfeed speed adjustable 2.5-13 m/min  ...

Sanding line with working width 1300 mm, constant working height.Line consisting of:- Undersander2 sanding units1 x Combi unit with contact roller 60? shore and segmented shoe, motor 22 kW1 x Segmented shoe, motor 15 kW1 x BrushVacuum workpiece suction, 7.5 kW motor-Intermediate transport: 4200 x 1300 mm-Top sander2 sanding units1 x Combi unit with 70? shore contact roller and segmented shoe, 22 kW motor1 x Segmented shoe, motor 15 kW,1 x BrushVacuum workpiece suction, motor 7.5 kWFeed speed: infinitely variableTable spring-loaded or fixed adjustable

Max. workpiece height 100mmMax. workpiece width 1000mmMin. workpiece width 500mmTop unit 6 brushesTop/bottom adjustable unitHelicopter rotating system2 types of brush rotation speedsSmooth adjustment of belt feed speedBelt feed 1.5kW4kW motorDiameter of the exhaust port 180mm, 200mm

Edge sander with oscillationSanding motor: 3,4 kW

Belt sander manufactured in 2010. This Other S3 333 features a working width of 1350 mm and accommodates workpiece thickness from 3 to 160 mm. It includes three sanding units with powerful 4 kW motors and a conveyor group speed of 3-16 m/min. If you are looking to get high-quality sanding capabilities, consider the Other S3 333 belt sander we have for sale. Contact us for further details.

max. width of grinding wheel: 100 mmdiameter / bore of grinding wheel: x mmFlange taper: x The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge Grinding Machine Lasm LBK 160 3P two-sided with feed Tiltable table Year of manufacture: 1986 The machine is in good condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Long belt sander Hunziker (Ref. No. 517-2697) Format: 2.5 x 1.2 m L x W x H: 5.0 x 2.0 x 1.7 m Weight approx. 480 kg The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Table belt grinding machine Hunziker L x W x H: 3.5 x 1.7 x 1.7 m The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

This BIESSE Levia 110 belt sander was manufactured in 2005. It features a maximum working width of 43 inches and belt capacity of 44 x 85. Equipped with a steel contact roller and a rubber roller, it ensures precise sanding. The machine includes automatic thickness adjustment with a digital display and a variable speed inverter for optimal control. Reach out for more information about this machine.

Inv. Num. : 8662 Type: Rondamat 960 Producer: Weinig Generated: 2000 Parameters: Max. Speed: 1500-3000 1/min Grinding wheel diameter: 150/225 mm Grinding wheel drilling: 60 mm

Long belt sanding machine, veneer sanding machine, Specifications: Table width 2800 mm Grinding width 2500 mm Table depth approx. 2000 mm Sanding belt length 9500 mm Pressure lamellar belt length 10 mm x 7750 mm Sanding belt dimensions 150 mm x 9500 mm Belt speed 25 + 12.5 m/s Suitable for intermediate paint sanding Workpiece height 6 - 220 mm Grinding engine power 24 kW Total power 27 kW Machine dimensions approx. L 5000 x W 2300 x H 2400 mm Space requirement of the machine in width is 3500 mm Machine weight 2600 kg TOP condition, technical documentation, sanding belt.

Technical data: Anti vibration welded steel construction Continuous Kettennantrieb 86 mm wide, chain parts made of steel and plastic, self-lubricating bearings, shift on prismatic Guide Adjustable belt speed 5-25 m / min Minimum height work table 870 mm (adjustable) The top pressure unit with adjustable Ã? rubber wheels 60 mm ball bearing Lateral pressure unit with rubber wheels Ã? 40 mm ball bearing Working height min / max 10/100 mm Minimum length 50 mm Minimum width of 30 mm The maximum width 200 mm Feed motor power 3 kW 1 milling unit kW / 2,4 2800 RPM 4 grinding machines with oscillating engines of Leistunj per 4 x 1.7 kW 2800ot RPM Total power consumption 12.5 kW Maschinenewicht 3000 kg very good Zistand, factory tested CE