670 grinding machines wood used for sale

Sanding line with working width 1300 mm, constant working height.Line consisting of:- Undersander2 sanding units1 x Combi unit with contact roller 60° shore and segmented shoe, motor 22 kW1 x Segmented shoe, motor 15 kW1 x BrushVacuum workpiece suction, 7.5 kW motor-Intermediate transport: 4200 x 1300 mm-Top sander2 sanding units1 x Combi unit with 70° shore contact roller and segmented shoe, 22 kW motor1 x Segmented shoe, motor 15 kW,1 x BrushVacuum workpiece suction, motor 7.5 kWFeed speed: infinitely variableTable spring-loaded or fixed adjustable

Max. workpiece height 100mmMax. workpiece width 1000mmMin. workpiece width 500mmTop unit 6 brushesTop/bottom adjustable unitHelicopter rotating system2 types of brush rotation speedsSmooth adjustment of belt feed speedBelt feed 1.5kW4kW motorDiameter of the exhaust port 180mm, 200mm

1) sander top VEGA 311 MRLSanding width 1100 mm.Working thickness 3 to 160 mmworking height 950 mmSanding belt dimensions 1120 x 2620 mm.Equipment:1) cutterblock diameter 180 mm 22 kW 47m/s2) rubber contact roller diameter 220 mm 22 kW 18m/s3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off4) Finishing brush unit at output 0.75 kW diameter 150 mmfeed speed adjustable 2.5-13 m/min 3 kWpneumatic sanding belt tensionmotor height adjustment 0.75 kWextraction rate: 11800 m²/h2) bottom sanderVEGA U 311 MRFSanding width 1100 mm.Working thickness 3 to 160 mmworking height 920 mmSanding belt dimensions 1120 x 2620 mm.Equipment:1) cutterblock diameter 180 mm 22 kW 47m/s2) rubber contact roller diameter 220 mm 22 kW 18m/s3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off4) Finishing brush unit at output 0.75 kW diameter 150 mmfeed speed adjustable 2.5-13 m/min ...

Table sizes: 3000 x 850 mm.Motor: 3 kWBelt sizes: 150 x 7800 mm.Motorised height adjustment

Fine sanding machineWorking width: 1300 mm.Workpiece thickness: 3-140 mmN° of units: 2 Wide belt, CSD sanding pad, belt sizes 2620 x 1350 mm, 18,5 kW motor,0,5-12 m/s belt speed with freq. Controlls, belt cleaning Wide belt, CSD sanding pad, belt sizes 2620 x 1350 mm, 15 kW motor, 0,5-12 m/s belt speed with freq. Controlls, belt cleaningBrush cleaning unit scotch bride 250 mm diameter, 4 kWBrush cleaning unit 150 mm diameter, 1,5 kWFeedbelt speed 5 - 25 m/min, 1,5 kW motor, frequency controlWorking height 930 mm +/- 20 mmCarpet cleaning brushEA dedusting machine high-pressure blow-off system with rotating nozzles and ionization for statically charged dust

Usefull width: 1030 mm.Sanding belt sizes: 1060 x 1900 mm.Number of sanding units: 3 Roller 15 kW, Roller 15 kW, Pad 11 kWMax. pass in thickness: 200 mm.Feed speeds: 5 and 10 m/minMotor feedbelt: 2,2 kWPneumatic belt tensioning and oscillationMotorised height adjustment, motor 0,75 kW, readout up to 1/10 mm.Automatic thickness adjustmentrevision in 2017

Top/bottom calibrating line:Bottom sanderNumber of sanding units: 41. Steel roller with motor 55 kW2. Steel roller with motor 45 kW3. Rubber roller with 90 Shore, motor 30 kW4. Rubber roller with 90 Shore, motor 22 kW5. Cleaning brushVariable Feed SpeedVacuum workpiece suctionTop sanderNumber of sanding units: 41. Steel roller with motor 55 kW2. Steel roller with motor 45 kW3. Rubber roller with 90 Shore, motor 30 kW4. Rubber roller with 90 Shore, motor 22 kW5. Cleaning brushVariable Feed SpeedVacuum workpiece suction

Fine sanding machineWorking width: 1300 mm.Workpiece thickness: 3 - 140 mmN° of units: 2 Crossbelt, CSD sanding pad, belt sizes 4900 x 150 mm, 13/17 kW motor, 12 and 24 m/s belt speed, belt cleaning Wide belt, CSD sanding pad, belt sizes 2620 x 1350 mm, 13/17 kW motor, 10 and 20 m/s belt speed, belt cleaning, first belt guiding roller with excenter adjustment for light calibration Fibre brush 150 mm diameter, 1,5 kWVacuum-feedbelt suction, 7,5 kW fanFeedmotor 3 kW, feedbelt speed 4,5 - 22 m/minMotorised rise and fall of the tablePanel tracers with 16 mm centers

Sanding width: 650 mm.Sanding belt sizes: 650 x 1900 mm.Number of sanding units: 2 Roller 11 kW, Pad 7,5 kWMax. pass in thickness: 200 mm.Feed speeds: 5 and 10 m/minMotor feedbelt: 2,2 kWPneumatic belt tensioning and oscillation

Useful sanding width: 1100 mm.Sanding belt dimensions: 1110 x 1900 mm.Number of sanding aggregates: 3 Roller steel grooved 15 kW, Roller 70° shore 18.5 kW, Roller 50° shore Aggregate 2 & 3 with shared motorMax. sanding thickness: 150 mm.Throughput speeds: 2,5 - 11 m/minMotor through-belt: 0,55 kWHeight adjustment motorized, motor 0,26 kWAutomatic thickness adjustmentInput rollers length 700mmOutput rollers 1600mmTouchscreen

Useful sanding width: 1350 mm.Sanding belt dimensions: 1370 x 2620 mm.Number of sanding units: 2 + 1 brush unit.1st sanding unit:Roller diameter 250 mm.Sanding belt rotation against feed directionDigital readoutRubber 90shOscillationMotor: 22kW2nd sanding unit:Roller diameter 320mmSanding belt rotation against feed directionDigital readoutRubber 55shMotor: 18.5 kW1st brush unit:Planetary motion discs 16 rotating discs 130 mm with Tynex wires4 counter-rotating headsIndependent motor for sliding motion controlThroughput speeds: 2 - 16 m/minMotor feed belt: 4 kWAutomatic thickness adjustment5 feed rollers length5 output rollers Internal LED lightingTouchscreen

Top and bottom sanderUsefull width: 435 mm.Sanding units top: Roller 7,5 kW, Pad 5,5 kW bottom : Roller 7,5 kW, Pad 5,5 kWSanding belt sizes: 455 x 1900 mm.Workpiece thickness: 5 - 200 mmMin workpiece length: 320 mm.Feed speed of the carpet: 8 and 16 m/min, motor 2,2 kW

max. width of grinding wheel: 100 mmdiameter / bore of grinding wheel: x mmFlange taper: x The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge Grinding Machine Lasm LBK 160 3P two-sided with feed Tiltable table Year of manufacture: 1986 The machine is in good condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Long belt sander Hunziker (Ref. No. 517-2697) Format: 2.5 x 1.2 m L x W x H: 5.0 x 2.0 x 1.7 m Weight approx. 480 kg The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Table belt grinding machine Hunziker L x W x H: 3.5 x 1.7 x 1.7 m The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Inv. Num. : 8662 Type: Rondamat 960 Producer: Weinig Generated: 2000 Parameters: Max. Speed: 1500-3000 1/min Grinding wheel diameter: 150/225 mm Grinding wheel drilling: 60 mm

This BIESSE Levia 110 belt sander was manufactured in 2005. It features a maximum working width of 43 inches and belt capacity of 44 x 85. Equipped with a steel contact roller and a rubber roller, it ensures precise sanding. The machine includes automatic thickness adjustment with a digital display and a variable speed inverter for optimal control. Reach out for more information about this machine.

Long belt sanding machine, veneer sanding machine, Specifications: Table width 2800 mm Grinding width 2500 mm Table depth approx. 2000 mm Sanding belt length 9500 mm Pressure lamellar belt length 10 mm x 7750 mm Sanding belt dimensions 150 mm x 9500 mm Belt speed 25 + 12.5 m/s Suitable for intermediate paint sanding Workpiece height 6 - 220 mm Grinding engine power 24 kW Total power 27 kW Machine dimensions approx. L 5000 x W 2300 x H 2400 mm Space requirement of the machine in width is 3500 mm Machine weight 2600 kg TOP condition, technical documentation, sanding belt.

Inv. Num. : 6016 Type: S2-T233 Producer: VIET Created: 2005 Parameters: Operating hours: 1600 h Switching-on hours: 600 h Sanding belt length: 5090 mm Sanding belt width: 150 mm Vacuum bandwidth: 1350 mm Grinding roller: 190 mm 2 longitudinal grinding belts at the top 3 engines Cross loop unit

Technical data: Anti vibration welded steel construction Continuous Kettennantrieb 86 mm wide, chain parts made of steel and plastic, self-lubricating bearings, shift on prismatic Guide Adjustable belt speed 5-25 m / min Minimum height work table 870 mm (adjustable) The top pressure unit with adjustable Ã? rubber wheels 60 mm ball bearing Lateral pressure unit with rubber wheels Ã? 40 mm ball bearing Working height min / max 10/100 mm Minimum length 50 mm Minimum width of 30 mm The maximum width 200 mm Feed motor power 3 kW 1 milling unit kW / 2,4 2800 RPM 4 grinding machines with oscillating engines of Leistunj per 4 x 1.7 kW 2800ot RPM Total power consumption 12.5 kW Maschinenewicht 3000 kg very good Zistand, factory tested CE

Long belt Sanders for intermediate lacquer sanding Technical data: Grinding width: max 2,300 mm, min. 200 mm Workpiece height 8-200 mm 1.Schleifbandmasse 100-120 mm x 9000 mm 2.Schleifbandmasse 150 mm x 9000 mm Pressure plate tape measures 10 x 7280 mm Speed 4-12.5 m / min Suitable for intermediate lacquer sanding Grinding motor power kW 10/16 Total power: 20 kW Machine dimensions approx. B 4590 x L 2344 x H 1640 mm Engine weight 2150 kg

Suitable for thin materials, wood and painted surfaces. Working width: 1650mm, feed rate: 5-25m/min, sanding belt dimensions: 1650mm/2620mm, connected load: 33kW, length: 1800mm, width: 2200mm, height: 2500mm, weight: 4.5t, operating hours: approx. 200h. The machine is technically fully functional. On-site inspection is possible.

Key data: 1100 mm, 2 , 180 mm

Broadband KÜNDIG Made in SUISSE - 1100 mm grinding width, 180 mm height - 2nd strip with: three-roller units / 2nd grinding roller with shoe for fine sanding - Grinding table Fix Sodas can be sanded in a continuous flow ( KUNDIG patent) - Electronic control The machine is immediately available from stock The price is: 4.900,-€ net from stock. That's a great price! A demonstration is possible

Drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 350 mm -Drum length: 1000 mm -Speed: 1450 rpm -Power: 18 kW -Shaft mount: Ø 80 mm -other sizes also available in stock -Weight: 450 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 194 mm -Drum length: 460 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 74 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 196 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 78 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 198 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 5.5 kW -Shaft mount: Ø 32 mm -other sizes also available in stock -Number: 14 engines available -Price per piece -Weight: 87 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 192 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30/60 mm -other sizes also available in stock -Number: several engines available -Weight: 70 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 184 mm -Drum length: 460 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 70 kg