451 extruders used for sale

AMUT TWIN SCREW EXTRUDER BA86 (photos before reconditioning), n.2 x 86 mm diam. counter-rotating screws (24 L/D with 4.440 worked hours), Siemens d.c. 31 kw drive, N.1 vacuum degassing pump 1,5 kw, Throughput rate up to 180 kg/h with PVC, N.6 heating areas, N.4 cooling areas, Manuals, CE, drawings available, The machine is offered reconditioned, options available: profiles downstream equipment, capacity: 180 kg/h, conditions: reconditioned, type: for PVC

MACCHI 3-LAYERS BLOWN FILM EXTRUSION LINE, for LLDPE/LDPE/HDPE, n.3 extruders with infra-red heaters (for energy saving), Screws Ø 65+80+65 mm, n.3 sliding plate screenchagers, Macchi Die head TE5303-IBC-350/500, Available dies Ø 350 and 400 mm gap 1,8 mm., IBC bubble cooling system, dual-flow, carbon fiber air ring, throughput rate up to 800 kg/h depending on material and recipe, 2.400 mm wide oscillating pull off unit, Motorized side gusseting units, Double, 2.350 mm wide fully automatic back-to-back winding station with fully automatic reel change, Max reel Ø 800 mm, including the following:, Tower, E&L Web guide, Gravimetric weight control system Piovan/Doteco, Components blander Shini, Doteco dosing units, Automatic Thickness control Kundig/K-Design Profile gauge control system, Calibrating basket, Martignoni Corona-treatment, N. 8 Air shafts, Constructed under Covid, started in  ...

MACCHI 3-LAYERS BLOWN FILM EXTRUSION LINE, for LLDPE/LDPE/HDPE, n.3 extruders with infra-red heaters (for energy saving), Screws Ø 65+80+65 mm, n.3 sliding plate screenchagers, Macchi Die head TE5303-IBC-350/500, Available dies Ø 350 and 400 mm gap 1,8 mm., IBC bubble cooling system, dual-flow, carbon fiber air ring, throughput rate up to 800 kg/h depending on material and recipe, 2.400 mm wide oscillating pull off unit, Motorized side gusseting units, Double, 2.350 mm wide fully automatic back-to-back winding station with fully automatic reel change, Max reel Ø 800 mm, including the following:, Tower, E&L Web guide, Gravimetric weight control system Piovan/Doteco, Components blander Shini, Doteco dosing units, Automatic Thickness control Kundig/K-Design Profile gauge control system, Calibrating basket, Martignoni Corona-treatment, N. 8 Air shafts, Constructed in 2011 started 2012, Ex ...

BAUSANO TWIN SCREW PVC EXTRUSION LINE, Type MD 2-90 B25-HK, barrel with 2 x 90 mm counter-rotating, parallel screws 25 L/D 80% performancees, Hot die-face-pelletizer, vibrating- cooling screen, Spare parts:, 1 set new screws for plasticised PVC, Machinery connected for test-run, availability: 09/25, conditions: running, type: for PVC and UPVC

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2004, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, FIMIC RAS400 fully automatic screenchanger y.2006 (revamped in 2018), water ring horizontal pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, possible addition of feeding silo, granule mixer, bag filling station,..., availability: immediate, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: as is, good working conditions

CDM PREALPINA 500-600 kg/h, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam. 35L/D, a.c. 283 kw drive, Constructed in 2013, crammed feeding unit, extruder 130 mm., one degassing pump 5,5 kw, fully-automatic screen changer FIMIC RAS 400, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine offered reconditioned, installed power - used power in work: about 60-65% : 435, availability: Subject to unsold, conditions: Totally reconditioned, options available: Fimic or non stop screencganger + buffer silo or loading screw+hopper, used power in work: 280 kw, cooling: 13.400 Kcal/h, MATERIALS: PE PP PC PS ABS EPS XPS EPP, delivery time: 30 days ca

FIMIC RAS 325 SCRAPER, fully automatic screenchanger, screening surface 77.900 mm², Throughput: up to 600 kg/h depending on material and contamination, with scraping system, suitable for extrusion lines with capacity up to ca 500 kg/h or more depending on screening, Just disconnected, excellent conditions, constructed in 2017, immediately available, We can supply spare screens for this machine at competitive prices., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, availability: immediate, type: fully automatic

GALA UNDERWATER PELLETIZER, Type SLC 6, Polymer diverter-valve with hydraulic-pack, die-plate 24 x Ø 3,2 mm ( 5° ), 6-arm knife-holder, By-Pass-System, GALA TWS water-box, heating power 12 kW installed, Water-pump 5,5 kW, GALA Spin-dryer 16,2 BF with 4 kW, Blower 1,1 kW, Siemens Control Cabinet Xantex ( MAAG )

COUMPOUNDING LINE type AD-S 75, - Including twin screw extruder with 2x72 mm co-rotating parallel segmented screws L/D 48, - screws design can be chosen, - Max screw speed up to 600 rpm., - 250 kw a.c.drive, - n.3 venting points, 1 with 3,0 kw vacuum pump, including condensate collector, - 2x side feeders type ZSB (twin screw) 1 x 0,62 mm. each one a.c.3,0 kw drive, including hopper loader with internal stirring unit ( for anti-bridging of additives / fillers as powders, fibers, … ), - Water cooling/tempering unit for cylinder-barrels,, - incl. tank, Temperature-sensor, circulation-pump and heat-exchanger, - semi-automatic, non-stop 2-piston screenhanger, - hydraulic unit, - Siemens PLC with touch screen (EN+DE) and ABB main control board., installed power - used power in work: about 60-65% : 250, availability: 2 months ca, options available: strand OR water ring OR underwater pelle ...

COPERION TWIN SCREW COMPOUNDER, Extruder with 2 x 65 mm. 40 L/D parallel co-rotating screws, 2x side-feeders, 90 kW a,c, drive, vacuum degassing pump, fitted with aa strand pelletizer (can be fitted with a water ring or an underwater pelletizeer), Control-board

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)

COPERION TWIN SCREW COMPOUNDER, Extruder with 2 x 75 mm. 40 L/D parallel co-rotating screws, 2x side-feeders, 132 kW a,c, drive, vacuum degassing pump, fitted with aa strand-pelletizing equipment (can be fitted with a water ring or an underwater pelletizeer), Control cabinet, installed power - used power in work: about 60-65% : 132 kw, options available: water ring OR underwater pelletizer, conditions: reconditioned, type: compunder

ERMAFA AGGLOMERATOR, SPS-System: Siemens S5 – 95U, Average throughput rate:, LDPE: 500kg, OPP: 300-400kg, TPO: 300-400kg, Including:, buffer silo with automatic filling of the agglomerating chamber through pneumatic system, automatic discharging of agglomerated material, Agglomerator, 355 kw drive, Control system, Control cabinet, Extraction system/filter, Classifier, small conveyor belt, Spare parts available:, 1x knife shaft, 35 knifes, Other spare parts need to be produced., Constructed in 1993, used by Constructor for test purposes until 2006, The machine has been working until 3rd quater 24, then disconnected in Feb 25 (after video), installed power - used power in work: about 60-65% : 355, availability: immediate, capacity: 300-500 kg/h depending on materiale and feeding rate, conditions: good working conditions

CINCINNATI CMT 35 APC, twin conical screw extruder, 2x35 mm screws, Control panel, 7,1 kw drive, 57.000 working hours, installed power - used power in work: about 60-65% : 7,1, type: PVC

TECNOVA 130 mm. SINGLE SCREW EXTRUDER, Buffer silo, Forced feeding system, Materials LDPE, LLDPE, HDPE, Screw diameter 130 mm, Single degassing pump, semi-automatic, non-stop hydraulic screenchanger for Ø 250 mm screens, oleodynamic power station, water ring pelletizer, drying centrifuge in stainless steel, vibrating screen, Electric cabinet with air conditioning, Nominal throughput rate 500-600 kg/h depending on materials and feeding rate, Machine offered reconditioned with warranty

TECNOVA RECYCLING EXTRUDER for BIO - PE PP ABS PC PS, Barrel with 90 mm screw diam. 37 L/D, Crammed feeding unit, Is working with BIO at 70 rpm yielding 270 kg/h, with PE at 100 rpm yelds 120 kg/h, N.1 degassing point, hydraulic screenchanger, water ring pelletizer from Gamma Meccanica, drying centrifuge, rotating classifier, electric cabinet for omplete management of the line, availability: 4 weeks for reconditioning or 1 week for AS IS, capacity: 120-270 kg/h, conditions: reconditioned, type: 90 mm. crammed feeder for light scraps

TECNOVA RECYCLING EXTRUDER, for PE PP PS PC ABS, Barrel with 130 mm screw 54 L/D, as new screw and barrel, n.2 degassing pumps for slightly moist or heavy prints, hydraulic screenchanger, hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet for complete management of the line, in need of reconditioning, capacity: 500-600 kg/h, conditions: reconditioning needed, type: 130 mm. 54 L/D 2xdegassing points 500-600 kg/h nominal throughput rate

MARIS TWIN SCREW CO-ROTATING EXTRUDER, suitable for compounds, recently used for SBS (stirene-butadiene-stirene), barrel with 2 x 58 mm screws 48 L/D - 600 rpm, Max Torque 945 Nm, 450 kg/h average throughput rate (depending on materials and feeding rate), n.1 vacuum degassing pump, 3 kw, 108 kw drive 1.345 rpm, Total installed power 171,5 kw, dry pelletizing unit - can be fitted with Water Ring or Strand or Underwater Pelletizer, vibrating screen, constructed in 2017, offered totally recondiktioned, installed power - used power in work: about 60-65% : 171.5, availability: 8 weeks from confirmatiom, options available: pelletizer - bespoke to project, capacity: 450 kg/h, conditions: totally reconditioned, type: 48 L/D 2x58 mm screws Ø

LEISTRITZ ZSE40HP, Co.rotating twin screw extruder, n.2 screws Ø 40 mm. 36 L/D, max screws speed 600 rpm, A.c.55 kw drive ca., 10 heating zones, Brabender dosing unit, single degassing pump, missing of screenchange - possible addition of fully automatic or semi-automatic screenchanger, 6-strand die head, It was running with ABS PP PE, Throughput rate up to 120 kg/h, Control cabinet with Siemens touch screen, Users manuals and electrical drawings available, Constructed in 2015, the line is offered reconditioned, availability: 6 weeks time, capacity: now 120 kg/h but depending on material, feeding rate and screw conditions, conditions: reconditioned, type: co-rotating compounder

FIMIC RAS 325 BACKFLUSH, fully automatic screenchanger, for back-flush only, so for contamination under 5%, no costs for doctor blades, no cost for laser filter., works with standard mesh, capacity rekated to screening mesh - with a 250 µ mesh, up to 700 kg/h, connected for test, offered totally reconditioned, with new control panel, availability: 4 -5 weeks time, capacity: Max 500-600 kg/h, conditions: totally reconditioned, type: fully automatic - backflush

BANDERA TWIN SCREW PVC PIPES EXTRUDER, for pipes with min/max diam.40/200 mm., extruder with n.2 parallel counter-rotating screws Ø 90 mm, Throghput rate 400 kg/hr, missing of screenchamger (can be added separately), n.2 dies available 40 to 125 mm + 125 to 200 mm., Tooling from 40-200 mm (available diam. 100 mm for O-Ring), Bandera 6 mt.long vacuum calibration tank, IPM haul off unit, IPM saw, IPM belling unit, constructed in 1998, totally refurbished in 2006 by Plasco, machine now disconnected, availability: immediate, working width: 40-200 mm Ø, capacity: 400 kg/h, conditions: disconnected, type: pipes extrusion line

ROLLEPAAL TWIN SCREW PVC PIPES EXTRUSION LINE, Mod.W2 125-22, Extruder with 2 parallel screws diam 125 mm 22 L/D (screws+barrel new 7-2013), for pipes with min./max diameter 63/200 mm., nominal production rate 500-600 kg/h depending on material, complete line with tooling from 63 to 200 mm Ø pressure an sewage pipes, Including many heads among which n.1 head for PVC DN 110 - DN 160, Constructed in 1992 - only 3.500 worked hours, Good working conditions, Connected, can be tested on a dry cycle, Spare parts inluded:, n.1 Rollepaal die for DN 110, 125, 160 + calibrators, n.1 Kuag die for DN 63 - DN 125 è tooling for DN 63, 90, 110, 125 + calibrators, n.1 Maplan RK4 die for 3 DN 160 - DN 200 + tooling for DN 160, 200 + calibrators, 6 mt.long Kuag Calibration vacuum tank type DVK 250 1,5 + 4,5, 4 mt long Kuag calibration vacuum tank type VK 250 / 4, n.1 Kuag Pull off unit up to 250mm Type  ...

TECOM BLOWN FILM EXTRUDER, for LDPE-RLDPE blends, Contrex feeding, 2 gravimetric components + 1 volumetric dosing units, Screw diam.70 mm 30 L/D, Rotating head, Low neck, 1.600 mm pull off unit, gusseting unit, Cason corona treatment, single color printer (for marks), 1.600 mm double collection frame, BRA 36+ Eurochiller, working width: 1600, availability: February 2026

TECOM BLOWN FILM EXTRUDER, for LDPE -BIO - RLDPE, Contrex feeding, 2 gravimetric + 1 volumetric components, screw diam. 65 mm.30 L/D, Rotating head, Low neck, pull off unit, gusseting units, Cason corona treatment, single color printing unit (for marks), 1.100 mm. double collection frame, BRA 25+ Eurochiller, working width: 1.100 mm., availability: February 2026, PRESENT CONDITIONS: running and testable

PRT WATER RING PELLETIZER, for PE PP PS PC ABS, nominal capacity 600-700 kg/h (tested up to 900 with PS), N.4 cutting blades, N.1 thermoregulation zones, Heating power 8.00 kW, Cutting motor power 4.00 kW, N.1 water pumps, heat exchanging unit, Single water pump power 3.00 kW, Vertical centrifuge power 5.50 kW, Steam vacuum power 0.25 kW, soundproofed discharging cyclon, Total installed power 20.75 kW, constructed in 2006, only 200 worked hours, installed power - used power in work: about 60-65% : 20.75, availability: immediate, capacity: 600-700 kg/h (tested with PS 900 kg/h), PRESENT CONDITIONS: as new, excellent quality, price is less than 50% of a new one

PVC PROFILE EXTRUSION LINE EVC BRAND, single screw extruder with 60 mm 28 LD, constructed in 1998, for 180 mm max width, 44 kw drive, control panel, Calibrating desk 3,7 m.long with 1 x 9 kw.pump, Caterpillar pull off unit, 180 mm wide, saw, 6,0 mt.long discharging table.

CINCINNATI-MILACRON TWIN SCREW EXTRUDER, for PVC profiles, extruder with 2 x 45 mm conical screws, average production 100 kg/h, 14 kw drive, for profiles with max width 250 mm., calibration desk with 2 pumps x 5 kw, caterpillar pull off unit, contact length 1500 mm, width250 mm., planetary saw, collection table, installed power - used power in work: about 60-65% : 14, capacity: 100 kg/h ca, screws: 45 mm. conical

MARIS TWIN SCREW EXTRUDER, Loading hopper for regrinds, Barrel with 2 x 92 mm screws 40 L/D, co-rotating parallel screws for polyolefines, CEAR d.c.motor, N.2 vacuum degassing pumps, 4-plate semi-automatic screenchanger, hydraulic pack, Average throughput rate around 1 Ton/h, Water ring pelletizer, drying centrifuge, Electrical control panel, The machine is offered as is or checked

ICMA S.GIORGIO TWIN SCREW EXTRUDER, for PE PP PS PC ABS, Barrel with 2 x 110 mm co-rotating screws, n.1 vacuum degassing pump, semi-automatic hydraulic screenchanger (possible fully automatic screenchanger), no cuttins, but we can supply STRAND or WATER RING or UNDERWATER, Electric cabinet