451 extruders used for sale

Key data: 120

Extruder 1 spindle for manufacture of pellets. 120 mm Ø, 35 L/D, brand name: FBM ( Falzoni), type: ETF 120 V 380/5L, year: 1988. Engine: 200 KW. Degasifier and filter changer. Head cut under water, year: 2006, brand: PRT and force-feeding silo.

Key data: 130

Extruder 1 spindle : 130 mm Ø, 35 L / D, for grancear plastics, brand: Plasco, with forced feeding. Degasser, with vacuum pump: 15 hp. Filter changer: 260 mm, overhead cut to water. Vibrating screen and motor: 238 KW with variable speed drive and electrical panel. GT-2982

NGR S-GRAN 65 VHD, Constructed in 2011, offered checked for good conditions, including:, loading conveyor belt, tunnel metal detector, densifier, extruder with 65 mm Ø screw, degassing point, hydraulic screenchanger, water ring pelletizer, drying centrifuge, extraction vent with cyclon and bag supporting structure., conditions: used, checked, type: compact recycling line

ICMA SAN GIORGIO TWIN SCREW EXTRUDER CO-ROTATING, used for elastomers TPE TPU SBS,.., Extruder with co-rotating segmented screws 2 x 140 mm 36 L/D, Screws speed 178 rpm, Reinforced gearbox, Siemens 430 kW drive, degassing pump, semi-automatic hydraulic screenchanger, hydraulic pack, Dry pelletizing unit, Electric panel overhauled in 2015, added touch control, Constructed in 1997, CE compliance declaration, electric drawings.

COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, spare : 2 screws and 1 barrel reconditioned to 100% performances, Mounted: screws + barrel in very good conditions, n.1 dosing unit with hopper, N.2 vacuum degassing points, d.c.132 kw Siemens main drive 400V 50 Hz, non-stop hydraulic screen-changer with 90 mm screens (available with fully automatic screenchanger, on request), hydraulic pack, fitted with strand die (available with water ring pelletizer on request) + stainless steel cooling bath with heat exchanging unit + air-blowing dryer, electric cabinet with air conditioning (for extruder, screen-changer, hydraulic pack), pelletizer for strands, TVV Cooling column for granule., constructed i n 2001, The line is offered totally reconditioned (photos show the machine during reconditioning), installed power - used power in work: about 60-65% : 1 ...

UNION SHEET EXTRUSION LINE, for PS for thermoforming sheets up to 1.500 mm wide, Main TR130 extruder with 130 mm screw Ø, 200 kW drive, Elerctrically heated fan cooled barrel., second TR60 extruder with 60 mm screw Ø, 50 Kw drive, 1.500 mm. flat die with flex lip die, 1.500 mm wide 3 roll inclined polishing stack with a.c. drive + inverter individual roll drives., 3 zone thermoregulator, pump group, haul off unit, availability: immediate, working width: 1.500 mm, conditions: good overall conditions, type: flat die

CDM PREALPINA REGRANULATING LINE 130 mm 2xdegassing, for PE PP PS PP PC ABS (it has been working with clean scraps only), extruder with 130 mm. screw Ø 40L/D, including buffer silo with agitators, horizontal extraction screw, crammed feeding unit synchronized to extruder screw, a.c. 283 kw drive, n.2 degassing pumps, semi-automatic screen changer 230 mm diam.screens , water ring pelletizing unit, stainless steel drying centrifuge, vibrating screen, electric cabinet, blower + pipings, vertical mixer, machine reconditioned, can be fitted with a [FIMIC RAS](.germanplast/listings/5241333-refurbished-fimic-ras-400-automatic -screenchager-reconditioned) fully automatic screenchanger, installed power - used power in work: about 60-65% : 435, capacity: 500-600 kg/h, availability: 5 weeks time, options available: fully automatic screenchanger, conditions: refurbished, type: double degassing fo ...

OMP PREALPINA 180 mm. 35 L/D, for HDPE LDPE LLDPE PC PP PS ABS, Offered totally reconditioned with warranty, The line includes:, (OPTIONAL - Buffer silo with agitators and feeding auger), forced feeding unit, extruder with NEW barrel and 180 mm NEW screw 35 L/D, vacuum degassing system, 397 kw d.c.drive (can be quoted with new a.c.driver+inverter), semi-automatic screen-changer with 300 mm diam. screens. (can be fitted with fully automatic screenchanger), water ring pelletizing unit, heat exchanging units on pelletizer and gearbox, drying centrifuge, vibro-classifier, NEW electric cabinet with PLC and touch screen display (or traditional commands, if preferred), throughput rate 1.000-1.400 kg/h depending on scraps and feeding rate, installed power 650 kw, used 420 ca in work, Users manuals, drawings, CE., Delivery : about 13 working weeks for total reconditioning, See how we recondition  ...

ICMA SAN GIORGIO EXTRUSION LINE, previously used for PP and PE pipes recycling, Buffer silo, Forced feeding hopper, Extruder with segmentyed screws 2x140 mm. 32 LD, Side loading gravimetric unit PLC Ergomec (y.2012), vacuum degassing pump, hydraulic screen changer, Filtec GRO1000 Water ring pelletizer (y.2016), Vibrating screen, water filtering unit (non-woven filters), Electric cabinet, Constructed in 1988, Offered AS WHERE IS or CHECKED for good working conditions or RECONDITIONED

ICMA SAN GIORGIO TWIN SCREW EXTRUSION LINE, used for PE PP, Forced feeding hopper with frame, Extruder with segmented screws 2x140 mm. 32 LD, 200 Kw drive, n.1 vacuum degassing pump, hydraulic screenchanger, Water ring pelletizer (year 2016), drying centrifuge in stainless steel, Constructed in 1990, Offered AS IS WHERE IS, conditions: used

GAMMA MECCANICA AF EXTRUSION LINE (photos and video taken before reconditioning - video includes shredder+granulator available separately), for LDPE LLDPE HDPE PP PS PC ABS, Nominal production rate : 900-1100 kg/h (this varies on material and feeding rate), Average energy consumption : 0,23-0,28 kwh/kg, inlcuding :, Buffer silo, screw conveyor, crammed feeding system, extruder with 160 mmm. screw 36 LD, double degassing system, hydraulic non-stop screenchanger 160/300MF, water ring pelletizer type TFD1000, centrifugal dryer, always ran with clean production scraps, very good running conditions - connected, The line is offered AS IS, See [Constructors page](.gamma-meccanica.it/en/plastic-recycling/plastic-recycling-af/) for more info, options available: reconditioning, capacity: 1.000 kg/h, type: for LDPE HDPE LLDPE PP PS PC ABS

CDM PREALPINA SINGLE SCREW EXTRUDER, Nominal capacity : 800 -1.100 mm., for LDPE HDPE PP ABS PS PC, Including:, buffer silo with inner agitators, ladder and supporting structure, horizontal extraction screw, forced feeding hopper with vertical screw, extruder with 180 mm diam. screw, 40 L/D, n.2 vacuum degassing pumps 5,5 kW, 283 kW a.c.drive with inverter 400V - 50 Hz., FIMIC RAS 600 fully automatic screen-changer (y.2023) (available with semi-automatic screen-changer), water ring pelletizer, stainless steel drying centrifuge (2011), heat exchanging unit, vibrating screen, 2-place bag filling structure, Total installed power 524 kW, Constructed in 2008, checked for good conditions, options available: semi-automatic screenchanger, blender, , capacity: 1 Ton/h, conditions: good, type: 180 mm double degassing for moist or printed plastics

LEISTRITZ 2x67 mm TWIN SCREW COMPOUNDING LINE, Starve feed hopper extruder with 2 x 67 mm Ø segmented, co-rotating screws 34 L/D max screw speed 300 rpm 6 heating areas on barrel vacuum degassing pump d.c. motor 75 kw with forced vent fan control panel size 0,4×1.15 x 2 mt. Dimensions :LxWxH 4,7 x 0,72 x 1,835 mt. weight about 3.000 kgs construction year 1993 machine offered reconditioned, availability: 7 weeks from confirmation, options available: cooling bath, strand pelletizer, conditions: reconditioned

Ghioldi single layer blown film extruder, suitable for LDPE and MDPE, extruder with 55 mm Ø screw diam., lever screen-changer, Rotating head, 150 mm Ø die, calibrating cage, pull off unit, gusseting units, Cason corona treatment, 1.100 mm single winding station, Tower included, complete with manuals, electrical drawings, CE compliance

UNDERWATER PELLETIZER, up to 1.400 kg/h with soft and rigid PP max 30 MFI, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger holder unit with blade pressure adjustme ...

TECOM BLOWN FILM EXTRUDER EXKN65, extruder with screw diam. 65 mm. (2013), Contrex gravimetric, 200 mm TP2 Tecom die, KRA25 double outlet ring, calibration basket, 1.200 mm pull off unit, 1.200 mm. double manual collection frame, electric cabinet (2013) with inverter, MISSING OF TOWER, availability: immediate, working width: 1.200 mm., conditions: good, type: film PE

GAMMA MECCANICA GM 125 COMPAC, Extrusion line with pre-compactor, Nominal throughput rate 800-950 kg/h depending on the type of material and feeding rate, Average energy consumption : 0.25-0,30 kwh/kg, The line includes:, Loading belt, tunnel metal detector, compactor with dosing unit, extruder with 125 mm screw diameter, 35 L/D, semi-automatic, non stop hydraulic non-stop screenchanger, oleo-dynamic pack, water ring pelletizer, drying centrifuge, recycling water tank, vibrating screen, electric cabinet for the complete management of the line, The line is offered fully reconditioned, See Constructors [description](.gamma-meccanica.it/en/plastic-recycling/plastic-recycli ng-compac/), (value of a new machine > € 700) due to the excellent throughput rate/energy consumption ratio., availability: immediate, capacity: 600-950 kg/h with only 0,25-0,30 kwh/kg used, conditions: reconditioned, t ...

LEDA EXTRUDER 160 mm 50 LD 2 degassing pumps,, ENERGY SAVING IR heaters, for PP PS PE ABS PC, etc., Very good quality extruder, 3 m3 ca. storage silo, crammed vertical screw for light materials with adjustable speed,, extruder with 160 mm. screw, 50 L/D, n.8 Infra Red Petrelli Heaters x 11 kw each V.380 - for great energy saving, 315 kw a.c.Sever drive with inverter (about 60% power used in work), Gefran inverter, n.2 vacuum degassing pumps, Zambello gearbox with oil recirculating pump, oil-water heat exchanging unit, Control cabinet for mananging the whole line (prepared for screenchanger and pelletizer), including thermoregulators, etc., Nominal throughput rate 800-900 kg./h depending on material., The extruder is offered RECONDITIONED, -------------------------------------------------, and can be completed with FULLY AUTOMATIC SCREENCHANGER + PELLETIZER, L/D RATIO: 50:1, options ava ...

GAMMAMECCANICA TANDEM SYSTEM 125 mm. 950 kg/h double screening, Throughput rate up to 600-950 kg/h ca, depending on material and feeding rate (0,30-0,40 Kwh/kg), Line suitable for the recycling for heavily printed, high humidity and contaminated materials., High performance degassing chamber for removal of up to 10 times more gas and humidity in the melted material compared to other systems (so you can save on the cost of an agglomerator), The line includes :, Loading conveyor belt, tunnel metal detector, automatic compactor, N.2 Dosing unit for masterbatches and more, 1st extruder with 125 mm. screw Ø 28 L/D, 1st degassing point, FIMIC RAS 500 fully aumatic screenchanger, control cabinet, 2nd extruder with 140 mm. screw Ø 18 L/D, 2nd degassing point, BD-PLAST non-stop screen-changer, TDA6 GM water ring pelletizer, heat exchanging unit, vibrating screen, blower, Water treatment unit ,  ...

This LEISTRITZ ZSE60MAXX-48D was manufactured in 2012. A co-rotating twin-screw extruder, its designed for high-performance compounding of advanced polymer materials, including biodegradable polymers. Adaptable to various extrusion processes, its ideal for bioplastics, masterbatch production, or specialty compounding. Contact us for more information about this machine.

EREMA RECYCLING LINE for PE PP, Type RM80E, constructed in 2004, including :, loading bel with metal detector, compactor, extruder 85 mm screw Ø, non-stop hhydraulic screenchanger, water ring pelletizer, sacking station, electric cabinet, availability: immediate, conditions: stored

STARLINGER RECOSTAR DYNAMIC 85 C-VAC, Year: 2023 (installed in 2024), Production: 500 kg/h, Material to be processed: Film of LDPE, LLDPE and HDPE including agricultural film, MFI (190/2,16)=0,8 - 2g/10min washed post-consumer waste, clean (without PVC and paper, abrasive or metallic contamination), unprinted-slightly printed and up to 100% surface printed, dry (max 5% surface moisture), Material proportioned to adequate shape for conveyor belt : Pre-cut with 30-50mm screen., Conveyor belt CB800D including metal detector, Masterbatch dosing unit MBD150 P including feeding and control, SMART feeder SF1100 (90kW) including temperature control, shock sensor & intake slider, Dynamic automation package DAP1100 (90kW), Air flushing for SMART feeder, Dust and steam exhaust unit for SMART feeder, Double filling station 1000L with piping & conveyor system, Throughput measurement for filling stati ...

CMG-MAM BLOWN FILM EXTRUDER for LDPE, extruder with screw diam. 80 mm., Production rate about 150 kg/h, die diam. 150 mm. on rotating head, haul off unit width 1.200 mm., corona treatment, winder mm.1.200, max reel diam. 1.200 mm., min/max film width 600/1200 mm

GAMMA MECCANICA 105 mm 40 L/D, for LDPE HDPE PP ABS PC PS, Nominal throughput rate 300-400 kg/h depending on feeding rate and material, Average energy consumption : 0,23-0,28 kWh/kg including buffer-silo feeding auger crammed feeder extruder with 105 mm screw 40 LD double degassing 110 kw a.c.drive with inverter non-stop hydraulic screenchanger (can be fitted with a [fully automatic screenchanger](.germanplast/listings/7610249-used-fimic-ras-325-automa tic-screenchanger)) water ring pelletizer drying centrifuge electrical cabinet user’s manuals and drawings constructed in 2000 offered RECONDITIONED, Total length 11.000 mt., Possible addition of upstream and downstream equipment., options available: fully automatic used screenchanger, capacity: 300-400 kg/h with only 0,23-0,28 kWh per kg produced, conditions: reconditioned, type: buffer silo+crammed feeder, Location: IT- 11020 Issogne , ...

BANDERA BLOWN FILM EXTRUDER, for PE, Bandera extruder with screw diam.90 mm., 250 mm die diam. on original Bandera head, reconditioned (not the one in photo), a.c. drive with inverter, calibrator, haul off unit, corona treatment, single color small printing group, single winding station with manual discharge 1.200 mm., good overall conditions, availability: immediate, working width: 1.200 mm., conditions: good

GAMMAMECCANICA Compac 125 mm. Construction year 1998 Including Loading conveyor belt, Metal detector, Compactor with driven haul off for reels, master dosing unit Engin Plast, Extruder 125 mm diam. 36 L/D with degassing pump d.c. Ansaldo drive 197 kW, Total installed power 501 kW motor, BD plast non-stop screenchanger diam. 200 mm, hydraulic power station, water ring pelletizer M 8500, Electrical cabinet, Type of machine: GAMMAMECCANICA PLASTIC RECYCLING LINE 125 mm.

PRT RECYCLING EXTRUDER for PE PP PC PS ABS, Extruder with 85 mm screw, 30 L/D, Constructed in year 2000 - very few hours of work, NEW Crammed feeder new 2023 FF85VE, 60 kw Siemens drive 2.200 rpm, Average throughput rate 200 kg/h, depending on materials and feeding rate, Total heaters power 38,6 kw, N.1 vacuum degassing pump, Manual screenchanger, NEW 2023 Water ring pelletizer WF150, Drying centrifuge, Total installed power cutting group 14 kw, Vibro classifier, Total weight about 3 Tonnes, excellent conditions, MATERIALS: PE PP PC PS ABS PS, capacity: ca.200 kg/h depending on materials and feeding rate, availability: ready-to-go

EREMA INTAREMA 906 TE ECO SAVE, construction year: 2017, Throughput rate up to 240 kg/h depending on materials and feeding rate, installed power 110,5 kw, Presently used for PE and PP, compact line including:, loading conveyor belt 6 m.long, 500 m wide, metal detector, Reel feeding unit RZ 50P, compacting unit, extruder with screw Ø 65 mm., 45 kw drive, double degassing unit, Non-stop, double Screen changer: Erema SW 2 134 RTF, water ring pelletizer HG 84 D, Drying centrifuge: GGT 75 A, Water pump, vibro-classifier for granule type GS 1510, Pellet transport system, Double big bag filling station, installed power - used power in work: about 60-65% : 110,5 kw, availability: immediate, options available: mixing-cooling silo, capacity: up to 240 kg/h, conditions: very good, type: compact line from scraps to granule

KRAUSS MAFFEI TWIN SCREW EXTRUDER (photos before reconditioning), Mod.KMD 2-90 KK, used for profiles, n.2 parallel screws diam. 90 mm 20 L/D Max 30.5 rpm, 40 kw d.c.drive, installed power 180 kw, feeding hopper, max production with PVC profile 240 kg/h, complete with control cabinet, Heating 28.5kW,, 5 Zones Heating and 2 Last Barrel Oil Cooling Barrel +1 Zone Adapter 4 Zones Double Die, degassing point, Measures 4.3 L x 1. 2 W x 2.3 (m) H (incl Hopper) ,, Approx.weight 4.3 Ton