beverage machines used for sale (2,641)

In the steam chamber pasteurizer, bottles can be pasteurized in crates on pallets with hot steam. The parameters for the temperature rise and the holding time of the set pasteurization temperature can be set as desired. Condition: in working order, well-maintained Nominal capacity (1 l bottles): 480 bottles/h Electr. Power: 4.00 kW Connected loads: 400 V / 16 A / 50 Hz / 5-Ph Steam connection: 3/4 inch Compressed air connection: 6 bar Machine dimensions (WxDxH): 1400 x 2000 x 2700 mm Weight: 700 kg

Vacuum filler MBV / Italy Type Synchrofill Hot filling 35 filling stations + SV4 screw capper Short tube Max. approx. 7,000 containers / h Container 1.00 liter glass bottle Year of construction 2000 FILM AVAILABLE - PLEASE REQUEST

Labelling machine Langguth E20 with 210 mm gluing height working direction: from right to left capacity: up to 7.000 bph complete reconditioned new electrical system new pneumatic frequency-controlled power regulation including glue pump set up for a bottle /glass type top condition, as good as new

A complete brewhouse SSP Lichtenvoorde, purchased from the Paul Mueller Company, is available. Components: mash tun, lauter tun, whirlpool, working platform, CIP system, spent grain container, and wort pump. Brew length: 40hl, min. brew length: 25hl, min. part mash: 12hl, spent grain container volume: 2.5m³, brews: 2, pumps: 4, wort cooling pump type: E-Hygia-Bloctronic I/25b, CIP system tanks: 2, heat exchanger: Pfaduko VT20 LOC.IN, capacity: 26l, max. temperature: 100°C. The system is equipped with a brewhouse automation including Siemens OP37 and PROSYT control, but this is defective. If desired, the brewhouse can be purchased at an additional cost with newly installed control, automation accessories, and general overhaul. Documentation available. An on-site inspection is possible.

The system consists of a KHS INNOPAL RK6-350 palletizer from 2004, a KUKA KR 360/1 industrial robot, and a Siemens Simatic S7 automation controller. The system is suitable for the automatic palletizing of cartons, bottles, or PET-packaged products.

Complete concentrate line in very good condition and capacity higher than 30.000 kg / hour Operating and consumption data Intake Pre-concentrate for fining Procedure Aroma - Quantity (!: 150) approx .: approx. 240l / h Steam consumption (5.5 bara) Cooling water consumption (26 ° C) Ice water consumption (1 ° C) Process water (15 ° C) Electrical power, Manufacturing year: 2001, Product: apple juice, Water evaporation: 31.550kg / h, - Quantity: 4,450kg / h, - Concentration: 70 -72 ° Brix, - Temperature: approx. 4 ° C, After cooling: 10 -15, For preheating and evaporation: approx.7,000kg / h, For condensation and cooling: approx. 250m3 / h, For aroma recovery: approx. 4 -5m3 / h, For vacuum pumps: approx. 3m3 / h, For pumps, vacuum pumps: approx. 80kW

Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL

Apple belt press SBP 820 from the manufacturer VORAN Strip width: 820 mm Working width: 600 mm Machine dimensions (LxWxH): 3230 x 1605 x 2020 mm Machine weight: 1800 kg Working Speed: 0.8 - 3.3m/minute Contact time: 5.5 - 1.4 minutes Drive: infinitely variable 1.5 kW Material: Stainless Steel Nominal capacity: up to 6 t/hour Year of brush cleaning: 2003 - Yield approx. 72% - Overall length 3230 mm, total width 1605 mm, height 2020 mm - 4 clamping / control motors of 0.37 kW each - 2 car wash motors of 0.12 kW each - Total energy consumption approx. 1.0 kW / hour, water consumption approx. 10 l / minute Integrated brush cleaning of the sieve belts, additional connection of an external HD cleaner available Car wash WAR 65: - Maximum grinding capacity: 6 t / hour - Screw diameter: 320 mm - Worm motor power: 2.2 kw - Mill motor power: 5.5 kw - Weight: 423 kg  ...

For wine filtration 1 Satorius Cross Flow filter system Type; Sartoflow 12 HF/ A built on frames with control cabinet, Siemens S 7 control Satorius Plant No, D03200 103-HF 12 Year of construction 2006 Design pressure Satorius system 6 bar Achievement: The filtration plant was shut down in autumn 2024 A visit to the facility near Koblens would be Sung with me at any time.

This line is an automated filling line designed for the aseptic filling of low pH (4.5) products, such as fruit juices with or without pulp, nectars, and other non-carbonated fruit drinks, into 500 ml, 750 ml, and 1000 ml barrier carton containers at ambient temperature, and the subsequent packaging of the containers into cartons for distribution. These products have the same shelf life as Tetra Pak technology. This line has a capacity of 8,100 cartons per hour, but can also be configured for 7,000 and 6,000 cartons per hour., production: Fruit juices with or without pulp , Method of filling: Aseptic, volumetric, Filling temperature: 4-25°C, Secondary packaging: Cardboard, hot-glued, Size of the container: 500 ml, 750 ml and 1000 ml , Product container: Pure-Pak Curve, standard cross-section 75x75 mm, Maximum capacity: 8100 cardboard containers of any size / hour

The aseptic Krones Triblock from 2005 is a high-performance filling line with a capacity of 20,000 bottles (1.5 liters) per hour. It is designed for filling both still and carbonated beverages and, thanks to its aseptic technology, offers a germ-free filling environment, which is particularly optimal for sensitive beverages. The line is designed for cap sizes of 28 mm and combines the functions of bottle preparation, filling, and capping in a compact design. Ideal for high hygiene and efficiency requirements in beverage production., Manufacturer: Crowns, Construction year: 2005, power: 20,000 bph / 1.5l, Products: Still and carbonated drinks

Ring crown , tear-off crown cork for 10-digit Krones fountain pen

The Meypack VP 400 is a modular packaging machine designed for flexibility and reliability. Whilst the table above shows the previous factory settings, the machine remains flexible for other layouts and product formats., Capacity: 30 cycles per minute, Voltage: 3N~ 400VAC, 50 Hz

Overview  The swing top closing machine was built in 2004 by the German manufacturer Rico. The machine is still in operation and can be inspected at any time.  Technical data  Output: 12,000 bottles/h  Formats: 0.33 l (Steinie bottle)  14 capping stations  Running direction: clockwise Touch panel for operation  Control system: Siemens S7 

Complete brewery 2 appliances - 6 hl per brew 1 brew per day possible Year of manufacture 2013 - Manufacturer: Caspar Schulz / Germany Consisting of: malt reception and transport 2 devices brewhouse - lauter tun - wort cooler - fermentation and storage tanks - brewhouse technology complete - bottle filler - KEG cleaner etc. - PROJECT: BRAU-KOMPLETT-25-6HL-2GER-HEBAF

Advantages:, • High labelling speed, • Automatic feeding and precise positioning of bottles, • Modular design suitable for various bottle sizes and shapes, • Easy to maintain and cost-efficient in operation, ---------------------------------------------------------------, Machine Condition:, • Used machine in good condition, • Previously used in the beverage industry, • Regularly maintained, • Supplied with spare parts, ---------------------------------------------------------------, Labelling Stations:, • 1 × Cold glue, • 2 × Self-adhesive, • 1 × Tax label, Labelling Speed: 20.000 bph

Overview This blowmoulder was manufactured in 2005 by Italian manufacturer SMI. Techn. Data 14 cavities Formats: 0,5 – 2,0 l, round, squared Scope of delivery Blowmoulding machine SMI SR14 Chiller ASKI year 2005 Preform tipper Preform feeder

Siphon / Bottle / Party Keg Filler 1 digit GTH 0.5 to 3 liter bottles + 5L party kegs 30 containers/h Dependent on the operator Semi-automatic Year of construction 2025

Manufacturer: Radenska-Steinle / Germany Type: RP 20/125 Spray heads: 20 Bottles 0.50 + 1.00 L + 1.5 liters Complete V2A Running Direction: Left to Right Year of Make: 1996 With control cabinet Film available - Please request

with manual cork magazincapacity / hour ca.: 1800amount of capping heads: 1Cork: sparkling wine corkDrive: motor driveelectrical control: simple elctric, no PLCMore then 300 machines new and second hand on our seema .de

Etikettiermaschine 2 StationenMore then 300 machines new and second hand on our seema .de

Rinser: 24 valvesFiller: 24 valvesScrew Capper: 4 headsBottle format: Diameter 46 mmCap format: 22×30 mm closure headMore then 300 machines new and second hand on our seema .de

Verschlussförderer Auswurfhöre 1.8mMore then 300 machines new and second hand on our seema .de

Sick KapselanfalterMore then 300 machines new and second hand on our seema .de

KapselaufsetzerMore then 300 machines new and second hand on our seema .de

Crowncapper 29mm + Natural Korker Sparkling WineFormate Parts  0.375 ,0,75 , 1lMore then 300 machines new and second hand on our seema .de

Bag Filter 1 bagMore then 300 machines new and second hand on our seema .de

- Baujahr: 1990- Gestellhöhe: 3200 mm- Für Paletten: 800 x 1200 mm und 1000 x 1200 mm- Entpalettierkopf: Mit Klemmlamellen- Grosser Flaschentisch: 1350 x 1900 mm- Flaschen-Zusammenführung auf einbahnigen Transporteur L: 3000mm- inkl. Abheber Kettenzug- Maschine in sehr gutem ZustandMore then 300 machines new and second hand on our seema .de

Filter Skit with  Prefilter for 3 cartridges Filter Code 07 30.Endfilter filter cartridge Filter Code 07 30.Piping, Valves, Bypass, Skit mounting, stainless steel More then 300 machines new and second hand on our seema .de

The Alfa Laval M10-MBASE is a compact and highly efficient plate heat exchanger, designed for demanding applications in the beverage and food industry, chemical processing, and general heating and cooling duties.Technical SpecificationsType: M10-MBASEHeat transfer area: 2.6 m²Plate material: Stainless steel Alloy 316, thickness 0.50 mmGasket material: NBRFF Clip-On (Nitrile rubber)Plate pack thickness: 63 mmTotal weight: 232 kgTotal volume: 13 litersDimensions: Height 672 mm, width 618 mm, depth 530 mmConnection standard: DIN NW100Bolts: M20Expandable: up to 17 additional platesOperating DataDesign pressure: 10 barTest pressure: 14.3 barDesign temperature: up to 120 °CMinimum temperature: 0 °CTypical flow examples (according to datasheet):Wine: 2,000 L/h (heating 12 → 17 °C, Δp = 47 kPa)Hot water: 2,000 L/h (cooling 30 → 24 °C, Δp = 22 kPa)Fruit juice: 240 L/h (heating 21 →  ...