2,643 beverage machines used for sale

Overview  This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data  Capacity: 18,000 bottles per hour Label positions: Full bottle sleeve or partial bottom sleeve Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery  CLEVER Machines GS 4001 sleeving unit Shrink tunnel CLEVER Machines STJ 3

Overview  This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time.    Technical Details    Capacity  28,800 bottles per hour   1,200 crates per hour   Recently processed parameters  Bottle dimensions  500ml   Outer diameter: 65,50mm   Total height: 206,30mm  Crates  Formation 6x4   Length crate: 400mm   Width crate: 300mm   Height: 255mm  Box inlet direction: transverse  Electrcial connection: 400/ 230V, 50Hz, 15 A 

Overview  This atmospheric filler was manufactured by Borelli in 2016 and is in good and well-maintained condition. The machine is still installed and can be viewed and tested in person at any time. Technical details  Filling valves: 10 Filling principle: Atmospheric Bottle formats: 0.33L (0.75L possible if with 26mm crown cap) Closure: 26mm crown cap Output: 1,500 bottles/hour

Overview  This fill level and closure inspection machine was manufactured in 2010 by German company KHS. The operation view will be done with the label inspection machine from Indspect. It is designed for checking the fill height, closure and label of full bottles. The machine was running until January 2025 and is now stored in the company. Technical data Capacity: up to 25,000 bph Scope of Delivery  Fill level and closure inspection system | KHS Label inspection system | Indspect

Overview   This capsule machine (model: PRISMA 200 R) was manufactured by the Italian manufacturer NORTAN in 1999. The machine has already been dismantled and stored, but is in good condition. It can be inspected at any time and is available immediately.  Technical details   Output: 13,000 bottles per hour Bottle formats processed: 0.375 L, 0.75 L, 1.5 L (Burgundy and Bordeaux bottles) Accepted capsule sizes: 45 mm and 55 mm length, 30 mm diameter Capsule loader included

Overview  This semi-automatic keg washer was manufactured in 2020 by Italian company SIFA. The Idrokeg 21 is equipped with two cleaning heads and designed for efficient steam-heated keg washing. With a capacity of up to 12 kegs per hour, it is suitable for small to medium-sized breweries. The unit is in very good condition, ready for immediate use, and comes with dedicated tanks, pumps, and cleaning features. Technical data  Capacity: 12 kegs/hour Cleaning stations: 2 Heating: Steam Formats: S-type kegs

Kreiselpumpe neuMore then 300 machines new and second hand on our seema .de

A fully automatic high-vacuum rotary filling and capping machine Alwid for spirits is available. Filling stations: 48, filling valve diameter: 14mm, capper type: Alwid Favorit-PP, capping heads: 10, closure types: PP28/PP28x44/PP31.5 deep, min. working height: 1150mm, bottle volume: 0.7l, bottle types: rectangular glass bottles/vodka bottles/long-neck bottles, filling capacity according to documentation: 18000bph, effective filling capacity: approx. 12000bph, weight: approx. 6500kg, operating hours: approx. 14000h. Without sorting unit and chutes. The vacuum pump probably needs descaling. The deviation between the documented and actual filling capacity per hour is due to foam formation during the filling process, which significantly reduces performance. Documentation available. An on-site inspection is possible.

The MIHO David bottle inspection system, manufactured in 2008 by the German manufacturer Miho, was developed for quality control in bottling plants., Capacity: Up to 25,000 bottles/hour, Running direction: From left to right

60 packs/min for 2x2 and 2x3 longneck, Vichy, and NRW bottles 40 packs/min for 2x3 swing-top bottles

Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Direction of flow: clockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW

A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible.

Overview This packaging line for repacking glass bottles into carriers, trays, cartons and dollies was produced between 2002 and 2016 by several European manufacturers such as Yaskawa, Profipack, DokuConsult KG and Krones. The line is currently still in operation until June 2025 and was specially designed for repacking 0.33L and 0.5L glass bottles into 6-bottle carriers (open baskets), returnable trays and various pallet types (Euro dolly, Euro pallet). It enables both the unloading and loading of full and empty containers into new packaging units. The system will be available from June 2025, as soon as it is decommissioned. Technical details  Output: up to 9,000 bottles per hour Formats processed: 0.5L NRW returnable bottles (brown) 0.33L non-returnable bottles (green and brown) 6 open basket carriers (2x3) for 0.5L and 0.33L Euro dolly: 400 x 600 x 1,600 mm Euro pallet: 1,200 x 800 x  ...

Overview This thermoforming packaging machine, type: Reepack RFM/E40 was built in 2014 in Germany.  The Reepack ReeForm E Series of thermoform fill seal packaging machines feature a stainless steel frame for sanitation in washdown environments. An easy open frame allows quick access to check, adjust, and repair all parts of the machine. Systems are located inside the machine frame, ensuring protection from damage. Technical Details Product Features: Cut-off length: 240 mm Bottom film: 420 mm Product Loading area: 1000mm Free position:5 5 4 4 Thermoforming depth: Max. 120 mm  Air pressure: 6 – 10 bar (600-1200 Nl / min.) Water consumption: 60 – 90 L / h – 1,5 – 2,5 bar (18 – 22°C) Enclosure rating: IP 65 Busch pump 300 Scope of delivery thermoforming packaging machine| Reepack | RFM/E40 | 2014

Overview The fully automatic KEG plant was manufactured in 1997 by the German manufacturer BTB. The plant cleans the inside and outside of the KEGs and fills them with a capacity of approx. 60 KEGs/h. Technical details Capacity: 60 KEG/ h for 30l DIN KEGs Formats: 10l, 20l, 30l, 50l, DIN or Euro KEGs Fittings: Micromatic flat fitting and Keggyfittng Scope of delivery Cleanomat CL5 with 4 active cleaning stations with 1 filling station Medium pressure external washer 3x supply units á 300l for mixed water, acid & lye Conveyor belts Volumetric filling system Automatic filling via volumeter Automatic filling via pressure transducer CIP cleaning of the CO2 line  

Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               Pneumatic do ...

Overview  The labeler was manufactured in 2000 by the German manufacturer Krones. It can label up to 22,000 bph and has processed 0.5l so far. The machine can be purchased refurbished and with warranty on request.  Technical data  Rotary labeling machine for the application of a wrap-around label Capacity: max. 22.000 bph  Processed formats: 0,5l Number of plates: 15 Hot glue Label: OPP Roll fed

Overview  The packer was manufactured in 2016 by the former German company Federspiel. It is located at a large German mineral well and is no longer in operation. The packer was removed at that time because it no longer met the performance requirements. Technical details Capacity: 3800 crates/h (at 0,7l)  Formats: 0,25l; 0,5l; 0,7l; 1,0l  Control Siemens S7 Multi gripper head with 2x12x8 grippers Bottle table  Bottle line-up block

Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machin ...

Overview This continously crate washer, type: Kitzinger Contino 250 was built in 2009 in Germany. The crate wahser ensures that all the dirt on the crate, such as proteins, blood residues, fasts and dried-on dirt, is removed in a single wash cycle. Technical Details Capacity: 160 crates/ hour Total electricity connection: 24 kW Heating Main Washing: 10 kW heating rinsing zone clear water: 10 kW power for pump and transport drive: 4 kW Water tank: 360 litres Connection fresh water: 1/2 inch Drain: DN 40 mm belt width: 420 mm, clearance: 420 mm x 350 mm, total dimensions: 4000 mm x 1300 mm x 1900 mm Scope of delivery continously crate washer | Kitzinger | Contino 250 | 2009

Overview The Kettner crate washer, type WAH 26, was manufactured in 1992. With an output of up to 2,600 crates per hour, it is suitable for use in existing filling lines for cleaning beverage crates. Technical details  Manufacturer: Kettner - Sotec GmbH Model: WAH 26 Year of manufacture: 1992 Capacity: 2,600 crates/h

Overview  This atmospheric semi-automatic can filler from the brand Cask, 2019, is for sale because the owner is closing the business. It is still operational and can be inspected in person. Technical Details  600 cans/hour 2 filling heads CO₂ pre-purge Canning table Formats Slim 163 mL 187 mL 250 mL Sleek 250 mL 355 mL Standard 250 mL 330 mL 355 mL 375 mL 440 mL 473 mL 500 mL Dimensions Length [mm]: 1530 Height [mm]: 2008 Depth [mm]: 646 Power supply: 240 VAC, 50 Hz Scope of delivery includes FIAC SUPER SILENT 59 air compressor (required for lid sealer), 8 bar

Overview This palletizing and winding line consists of an Ocme  palletizer and two Robopac Genesis stretch wrapping machines, both manufactured in 2014. The line was designed for handling shrink containers and is in good condition. It is suitable for palletizing and wrapping multiple pallet formats and offers a production output of 30,000 bottles per hour, depending on the format. The grouping of the layer formation is done by two Fanuc robots. There are two more Fanucs for the palletizing and the adding of an intermediate layer. The palletizing and winding is part of a complete line, from which some components have already been sold. Technical details Palletizer Manufacturer: Ocme Model: Pegasus F450  Year of construction: 2014 Products processed: Shrink packs: PET 0.75 L 2 x 32 PET 1.0 L 3 x 2 PET 1.5 L 3 x 2 PET 1.5 L 3 x 4 Pallet Formats: Euro Pallet 800 x 1200 Chep Duesseldorfer 6 ...

Overview This complete brewing equipment is mainly from 2014 and is becoming available because the company is closed. The equipment is already dismantled and stored properly. Scope  Water Softener Compressor | Josval Sauber 240 D Mill | Robix ROPPI 250 Thermindus Boiler Ps(Barg 6) PL (Barg 10.4) Ts Max 165, Ts min 10, kW 34 Portable Pump 2.20kw INOX Hoses, cones, keys Manual Isobaric Bottling Machine 4 spouts Automatic Labeler | Arca L10-8128 2x Rotating Table with Regulator 100cm Diameter, for input and output of bottles or cans Videojet 1220 Batch Coder Infrico Undercounter Refrigerator with 3 Doors Brewhouse | Spadoni | MBS 600 VAP | 2014 Spadoni 600, Masher 680 Liters, Bottom Filter, Rotating Blades, Transfer and Recirculation Pump Boiler 720lt with Whirlpool, with Boiler Pump and Spadoni Plate Cooler Hot Water Tank | Spadoni | 10hl Cold Water Tank | Spadoni | 10hl Mixing Tanks | Sp ...

Overview Aseptic PET filling line for fruit juices, juice-based beverages, and spritzers, built 2002–2007 by KRONES. Suitable for still and carbonated products (carbonation currently disconnected). Covers blowing, filling, labeling, packaging, palletizing. Bottle sizes 0.5–1.5 L, 28 mm closures. Nominal output: 20,000 b/h (1.0 L still). Fully assembled, out of operation, viewing by appointment. Technical details Capacity: up to 24,000 b/h (0.5 L still) Bottle sizes: 0.5–1.5 L PET Products: still/carbonated, with/without pulp Closures: 28 mm flat cap Years of manufacture: 2002–2007 Scope of delivery Pos. 1 Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP Pos. 2 Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h Pos. 3 Sterile tank: Roth 2002, 11,000 L Pos. 4 Carbonization: Roth/Ruland 2002, 2575 L, disconnected Pos. 5 Nitrogen system: Ter ...

Overview  The filling line for gable top packaging was manufactured in 2008 by the Norwegian company Elopak. It consists of a carton filler, cap applicator, and packer. The filling line is still installed, but no longer connected. However, it can be inspected in person. Technical Details  Capacity: 8,000 cartons/ h Formats: 0,5l 0,75l 1,0l Operating hours: 32,500 Scope of Delivery  Aseptic Carton Filler | Elopak | S-PS80HA | 2008 3x Cap Applicator | Elopak | PLA-S30 | 2009 Tray Packer | OYSTAR A+F | Traypacker TF | 2011

Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. The filler (KHS Innofill monobloc) and accumulation table (Sidel AQ) are also available without the blow molder (Sidel SBO 18 Series 2), price on request.  Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000                   Number of moulds: 18            Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained    ...

This complete KHS - Krones aseptic line, manufactured in 2005, is specifically designed for the safe and, hygienic filling of beverages into PET bottles. It provides a fully aseptic process that ensures, maximum product safety and extended shelf life. The line is suitable for both still and carbonated soft, drinks, with a capacity of 30.000 bph for 0,5l bottles. It supports flat cap closures with a size of 28 mm, (PCO1810) and 38 mm DS 38/15 2T SFB CA (3504). It also allows the use of sleeve labels. The combination of cutting-edge technology and precise control makes this line an ideal choice for producers who prioritize quality and efficiency., Product types: Non-carbonated and carbonated soft drinks, Filling technology: Wet Aseptic, Possible Volumes: 0.2 - 1.5 l, Number of employees to run the line: 4-5, Labeling: OPP labels and sleeve labels

Mecamarc OptimecaMore then 300 machines new and second hand on our seema .de

Stentz AbfülltechnikMore then 300 machines new and second hand on our seema .de