Injection molding machines used for sale (418)

Key data: 2200 kN

Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of Make: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ni ...

Key data: 2000 kN

Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of Make: 2003 Injection unit: Screw diameter: 40 mm Injection weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Production line with the Arburg Multilift side robot 2K Machine Air Valve x 1 Hydraulic core pull x 5 Control with hot runners Reinforced Injection Units – Bimetal Proportional valves on sprinkler units - precise spraying The vertical injection unit - screw diameter: ⌀25 mm - 49 g/hp All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine o ...

Key data: 1600 kN

Arburg 520S 1600-400/170 e² / Production line with the Geiger robot Year of Make: 2012 Injection unit: Screw diameter: 35 mm Injection weight: 141 g Spray pressure: 2500 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Geiger Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 5 Control with hot runners x 12 Reinforced Injection Units – Bimetal Machine with two cylinders / batteries with compressed nitrogen (extra charge for fast work) The machine has a servo motor built into the injection unit, which is responsible for dosing the pla ...

Key data: 1600 kN

Arburg 520S 1600-290/100 / Production line with the Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of manufacture: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air Valve x 3 Hydraulic, needle-core pull, controlled by a proportional valve x 2 Reinforced Injection Units – Bimetal Proportional valves on sprinkler units - precise spraying Machine with two cylinders / bat ...

Key data: 1500 kN

Arburg 520H 1500-290 e² / Hybrid machine / Production line with the Wittmann W818 side robot / Operating hours: 21,588 h in automatic mode Year of manufacture: 05.2016 Injection unit: Screw diameter: 30 mm Injection weight: 97 g Spray pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 21,588 h in automatic mode Euromap 67 Robot interface Air Valve x 5 Core train control Air Core Pull x 3 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which  ...

Key data: 1500 kN

Arburg 520H 1500-800 e² / Hybrid machine / Production line with the Arburg Multilift H side robot Injection unit: Screw diameter: 55 mm Injection weight: 434 g Spray pressure: 1650 bar Dosing volume: 474 ccm Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubric ...

Key data: 1500 kN

Arburg 520H 1500-800 e² / Hybrid machine / Production line with the Arburg Multilift H side robot Year of manufacture: 04.2012 Injection unit: Screw diameter: 55 mm Injection weight: 434 g Spray pressure: 1650 bar Dosing volume: 474 ccm Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Control with air valve Core train control Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubricatio ...

Screw diameter: 93 mm Injectable volume / Shot volume: 3138 cm3 Injection pressure : 1912 bar Column passage / Bettween tie bar: 950 x 850 mm Mold Thickness /Tickness tie bar: 300-1000 mm Opening stroke: 930 mm Ejection stroke: 350 mm 2 cores / 2 corepulling 2 blow guns / 2 air valves Robot interface

Key data: 700 , 1670 , 110

Screw diameter: 110 mm Injectable volume / Shot volume: 4750 cm3 Injectable weight / Shot weight: 4320 g Injection pressure: 1670 bar Column passage / Bettween tie bar: 900 x 1000 mm Mold Thickness /Tickness tie bar: 400-1000 mm Opening stroke: 1000 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Key data: 900 kN, 22 mm

Stock No.: 503415 Manufacturer: ENGEL Type: VICTORY 80-90 tech Control: CC200 Year of Make: 2009 Hours: 70171 h Clamping force: 900 kN Panel size h x v: 740 x 680 mm Min. installation height: 300 mm Plate spacing max.: 800 mm Opening travel: 500 mm Screw diameter: 22 mm Displacement: 38 cc Spray pressure: 2060 bar Equipment Screen text German CEE socket 16A Core pull hydraulic 1x Air valve 2x Machine with water battery Machine without material hopper Levelling elements Schuko socket 10A Tool heater 4x Machine dimensions LxWxH: 4.4m x 1.5m x 2m Total weight: 6700KG

Key data: 900 kN, 30 mm

Stock No.: 503670 Manufacturer: Wittmann Battenfeld Type: HM 90-210 Control: UNILOG B6 Year of Make: 2010 Clamping force: 900 kN Tie bar h x v: 420 x 370 mm Panel size h x v: 630 x 613 mm Min. installation height: 450 mm Max. installation height: 925 mm Plate spacing max.: 925 mm Opening travel: 475 mm Screw diameter: 30 mm Displacement: 106 cc Spray pressure: 2042 bar Equipment Screen text German CEE socket 16A Core pull hydraulic 2x Air valve 1x Machine with water battery Machine without material hopper Levelling elements Plasticizing unit highly wear-resistant and corrosion-resistant Worm drive with three-phase servo motor Ethernet interface Interface EUROMAP 13 EUROMAP 67 Handling Interface Interface for coloring device Interface for temperature control unit Interface USB Schuko socket 10A Tool heater 6x Machine dimensions LxWxH: 4.35m x 1.5m  ...

Key data: 900 kN, 30 mm

Stock No.: 503672 Manufacturer: Battenfeld Type: HM 90-210 Control: UNILOG B6 Year of Make: 2013 Hours: 30533 h Clamping force: 900 kN Tie bar h x v: 420 x 370 mm Panel size h x v: 580 x 630 mm Min. installation height: 450 mm Plate spacing max.: 925 mm Opening travel: 475 mm Screw diameter: 30 mm Displacement: 106 cc Spray pressure: 2042 bar Machine dimensions LxWxH: 4m x 1.5m x 2.2m Total Weight: 4100KG Equipment Screen text German CEE socket 16A CEE socket 32A Core pull hydraulic 2x Air valve 1x Levelling elements Plasticizing unit highly wear-resistant and corrosion-resistant Worm drive with three-phase servo motor Ethernet interface Interface EUROMAP 13 EUROMAP 67 Handling Interface Interface for coloring device Interface for temperature control unit Schuko socket 10A Tool heater 8x

Key data: 900 kN, 42 mm

Stock No.: 503452 Manufacturer: BOY Type: 90 E Control: Procan ALPHA Year of Make: 2012 Hours: 49130 h Clamping force: 900 kN Tie bar h x v: 430 x 360 mm Panel size h x v: 635 x 610 mm Min. installation height: 250 mm Plate spacing max.: 725 mm Opening travel: 475 mm Screw diameter: 42 mm Capacity: 214.7 cc Spray pressure: 1724 bar Machine dimensions LxWxH: 4.37m x 1.21m x 2.2m Total Weight: 3730KG

Key data: 800 kN, 35 mm

Stock No.: 503701 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control: MC6 Year of Make: 2019 Operating hours: 9000 h Clamping force: 800 kN Holm dimension h x v: 420 x 420 mm Panel size h x v: 670 x 670 mm Min. installation height: 250 mm Plate spacing max.: 750 mm Opening travel: 500 mm Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 2429 bar Equipment 3 freely programmable inputs and outputs Screen text German Screentext Polish CEE socket 16A CEE socket 32A Core pull hydraulic 1x Air valve 1x Machine with material hopper Machine with water battery Levelling elements Interface BDE Interface for coloring device Schuko socket 10A Low-wear plasticizing unit Machine dimensions LxWxH: 4.4m x 1.7m x 2m Total Weight: 3900KG

Key data: 800 kN, 35 mm

Stock No.: 503232 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 EX Control: MC5 Year of Make: 2008 Hours: 49673 h Clamping force: 800 kN Tie bar h x v: 520 x 420 mm Plate size h x v: 640 x 740 mm Min. installation height: 300 mm Max. plate spacing: 790 mm Screw diameter: 35 mm Displacement: 156 cc Spray pressure: 2429 bar Equipment Screen text German CEE socket 16A Air valve 1x Machine with material hopper Machine with water battery Levelling elements EUROMAP 67 Handling Interface Interface USB Schuko socket 10A Tool heater 24x Machine dimensions LxWxH: 5.35m x 1.7m x 2m Total Weight: 6500KG

Key data: 800 kN, 25 mm

Stock No.: 503576 Manufacturer: ARBURG Type: Allrounder 900 T 800-150 Control: Year of Make: 2010 Hours: 72154 h Clamping force: 800 kN Tie-bar dimension h x v: 900 x 900 mm Min. installation height: 250 mm Plate spacing max.: 550 mm Opening travel: 300 mm Screw diameter: 25 mm Displacement: 54 cc Spray pressure: 2500 bar Equipment Screen text German Air valve 1x Machine with rotary table Machine with water battery Levelling elements Interface BDE Machine dimensions LxWxH: 3.8m x 1.85m x 2.15m Total Weight: 5000KG

Key data: 800 kN, 40 mm

Stock No.: 503703 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control: MC6 Year of Make: 2021 Hours: 5646 h Clamping force: 800 kN Holm dimension h x v: 420 x 420 mm Panel size h x v: 670 x 670 mm Min. installation height: 250 mm Plate spacing max.: 750 mm Opening travel: 500 mm Screw diameter: 40 mm Displacement: 201 cc Spray pressure: 1860 bar Equipment 3 freely programmable inputs and outputs Screen text German Screentext Polish CEE socket 16A CEE socket 32A Increased ejector force Core pull hydraulic 1x Air valve 1x Machine with material hopper Machine with water battery Levelling elements Plasticizing unit highly wear-resistant and corrosion-resistant Interface BDE Interface for coloring device Interface USB Schuko socket 10A Machine dimensions LxWxH: 4.3m x 1.6m x 2m Total Weight: 3900KG

Key data: 500 kN, 25 mm

Stock No.: 503615 Manufacturer: ARBURG Type: Allrounder 375 V 500-170 Control: Selogica-direct Year of Make: 2013 Hours: 36163 h Clamping force: 500 kN Min. installation height: 200 mm Max. installation height: 550 mm Plate spacing max.: 302 mm Opening travel: 225 mm Size rotary table D: 900 mm Screw diameter: 25 mm Displacement: 59 cc Spray pressure: 2500 bar Equipment Screen text German Turntable Core pull hydraulic 1x Machine with water battery Machine without material hopper Levelling elements EUROMAP 67 Handling Interface Interface EUROMAP 73 Ejector plate fuse interface Machine dimensions LxWxH: 3m x 1.6m x 3.48m Total weight: 3540 KG

Key data: 2000 kN, 359 g/PS, 50 mm

Arburg 570A-2000-800/170 Two-component hybrid injection moulding machine with sorting flap (247) Category: Injection moulding machines Brand: Arburg Number: 247 Availability: in stock Year of production: 2009 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 50//35 Injection weight [g]: 359//105 Injection pressure [bar]: 2000//1470 Clamping force [kN]: 2000 Gap spacing [mm]: 570 x 570 Plate size [mm]: 795 x 795 Minimum mould height [mm]: 400 Control Type: Selogica Tongue: English, German Working time [h]: 84609 Weight [kg]: 10.950 Dimensions [mm]: 6000 x 2000 Feed hopper: NO Air Valve: 1x

Key data: 14000 kN

Machine + Robot

ENGEL ES 80/50 HL injection moulding machine was built in 1996 in Austria by ENGEL Austria GmbH. The machine is designed for the efficient production of plastic components used both in everyday products and in many industrial sectors. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould. Once cooled, the material takes on the mould’s shape, resulting in precise, repeatable components of high quality. The ENGEL ES 80/50 HL features, among others, a 25 mm diameter screw and a precision mould clamping system with a clamping force of 50 tonnes. Day-to-day operation of the machine is facilitated by the intuitive ENGEL CC100 control system, which enables precise setting and monitoring of injection moulding process parameters. All this is complemented by an extremely rigid design that maintains  ...

ENGEL ES 200/80 HL injection moulding machine was built in 1998 in Austria by ENGEL Austria GmbH. The machine is designed for the production of plastic components of various shapes, colours and applications. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. The result is precise and repeatable components of high quality. The ENGEL ES 200/80 HL features, among others, a 22 mm diameter screw and a precision mould clamping system with a clamping force of 80 tonnes. All injection moulding parameters are programmed via the intuitive ENGEL CC100 control system, which simplifies day-to-day operation of the machine. The injection moulding machine can also be equipped with production automation systems to increase the efficiency of the e ...

ENGEL VC 80/25 TECH injection moulding machine was built in 2004 in Austria by ENGEL Austria GmbH. The machine is designed for the production of plastic components used both in everyday products and in many industrial sectors. These components are produced using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould. Once cooled, the material takes on the mould’s shape, resulting in precise, repeatable components of high quality. The ENGEL VC 80/25 TECH is an excellent solution for both single-unit and series production. The machine is equipped, among others, with a 22 mm diameter screw and a precision mould clamping system with a clamping force of 25 tonnes. Day-to-day operation of the injection moulding machine is facilitated by the intuitive ENGEL CC100 control system, which enables precise setting and monitoring of in ...

BORCHE BS 120 injection moulding machine was built in 2018 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the mass production of technical components and everyday products made from plastics, in a variety of shapes and for various applications. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. The result is precise and repeatable components of high quality. The offered machine represents the Borche BS Plus series, designed for companies seeking high efficiency with reduced operating costs. Compared with the manufacturer’s standard models, it features an energy-saving servo drive and a more efficient pump, enabling more economical operation. The BORCHE BS 120 Plus also stands out with its 40 mm diamete ...

BORCHE BS 150 injection moulding machine was built in 2018 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the mass production of plastic parts used in both everyday products and in many industrial sectors. These parts are manufactured using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. As a result, precise and repeatable parts of high quality are produced. The offered machine belongs to the Borche BS Plus series, designed for companies seeking lower operating costs whilst maintaining high production efficiency. Compared with the manufacturer’s standard models, it is equipped with an energy-saving servo drive and a more efficient pump. The BORCHE BS 150 Plus also features, among others, a 45 mm diameter screw and a precise mould  ...

KRAUSS MAFFEI KM 175-1000 C2 injection moulding machine was manufactured in 2002 in Germany by Krauss-Maffei Kunststofftechnik München Germany. The machine is designed for the mass production of plastic components of various shapes, colours and applications. The components are produced using the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. This process enables the production of precise and repeatable components of high quality. The KRAUSS MAFFEI KM 175-1000 C2 is equipped, among others, with a 55 mm diameter screw and a precision mould clamping system with a clamping force of 175 tonnes. Thanks to additional core pulls, the machine can work with more advanced moulds for the production of parts with complex geometries. Day-to-day operation of the machine is fa ...

Manufacturer: ARBURG Model: ALLROUNDER Centex 470 C 1500 - 400 Year: 2006 Condition: Used Stock number: 9406 Clamping force: 150 t Screw diameter: 40 mm Injection capacity: 201 cc Maximum distance between mounting plates: 750 mm Injection Molding Stroke: 500 mm Distance between uprights (horizontal): 470 mm Distance between uprights (vertical): 470 mm

Manufacturer: Krauss Maffei Model No.: PrecisionMolding 160-750 Year: 2022 Condition: Used Stock number: 9405 Clamping force: 160 t Screw diameter: 50 mm Injection capacity: 393 cm³ Distance between uprights (horizontal): 570 mm Distance between uprights (vertical): 520 mm

ENGEL VICTOY 160 T Type: VICTORY 860/160 spex Clamping force: 160 T / 1600 KN Year: 2017 Number of hours: 36,900 hours Screw diameter: 55 mm Injectable volume: 508 cm3 Dimensions of the trays. : 750 x 750 mm Min mould thickness: 250 mm Dimensions: 5.80 x 1.70 x 2.40 m Weight: 8900 kg

Specification Injection moulding machine Demag IntElect 100/420-410 (all-electric) General data Clamping force: 100 t (1000 kN) Year of Make: 2007 Control: NC4 / MC4 Injection unit: 410 Screw diameter: 40 mm Clamping unit Clearance spar spacing: 420 x 420 mm Machine weight: approx. 5,000 kg Equipment: 2 x hydraulic core pull Location: Aachen, Germany

Specification Injection Moulding Machine Demag Ergotech 100/420-600 concept General data Clamping force: 1,000 kN (100 t) Year of Make: 2000 Control: Demag NC4 / ergocontrol Clamping unit Handlebar spacing (H x V): 420 x 420 mm Tool installation height min.: 250 mm Opening travel: 750 mm Ejector force: 41 kN Injection unit Screw diameter: 35 mm Injection unit: 600 Location: Aachen, Germany

Key data: 800 kN, 100 g/PS, 35 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: ENGEL Type: VICTORY 330/80 TECH Year of Make: 2012 Clamping force: 80 tons Spar spacing: SPARLESS Screws DN: 35 mm Max. displacement: 110 ccm³ Moulded part weight 100 g/hp Control: CC200 Equipment: -Robot, manufacturer: SEPRO, type: AXESS -2 x Core Pulls -Blow-out valve -Conveyor belt -Security fence

Key data: 1200 , 134 , 36

Key data: 3800 , 1693 , 80

Key data: 3200 , 845 , 65

Key data: 3200 , 694 , 60

Key data: 2000 , 50

ARBURG ALLROUNDER 720S 3200-2100 injection moulding machine was built in 2008 in Germany by ARBURG GmbH + Co KG. The machine is designed for the efficient mass production of plastic components used across a wide range of industries. The production process utilises the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. A 60 mm diameter screw and a precision mould clamping system with a clamping force of 320 tonnes ensure the process runs smoothly, guaranteeing high repeatability and quality of the parts produced. The ARBURG ALLROUNDER 720S 3200-2100 is offered with a comprehensive range of equipment that increases the level of automation of the production process. All process parameters are programmed in the intuitive SELOGICA control system, which ensures convenient ...

BORCHE BH500 injection moulding machine was built in 2016 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the efficient production of plastic components used in many industrial sectors and in everyday products. The production process utilises the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. This technology enables the rapid and precise production of repeatable components with complex geometries. The BORCHE BH500 has been designed for demanding mass production and intensive use. The machine is equipped, among others, with an 80 mm diameter screw and a precision mould clamping system with a force of 500 tonnes, which ensures a stable process. All operating parameters are programmed via the intuitive KEBA control system, which enables con ...

Key data: 3200 , 1035 , 70

ENGEL ES 1350/275 HL ST injection moulding machine was manufactured in 1999 in Austria by ENGEL Austria GmbH. The machine is designed for the economical production of plastic parts in various shapes, colours and for various purposes. This process utilises the injection moulding method, which involves injecting plastified plastic into a closed mould, where the material cools and takes on the mould’s shape. The combination of a high clamping force of 275 tonnes with proven components ensures high efficiency even during demanding series production. The ENGEL ES 1350/275 HL ST is fitted with a 60 mm diameter screw, which is responsible for plasticising the material and precisely feeding it into the injection mould. The ability to operate at increased injection pressure enables the processing of more demanding plastics and the precise filling of moulds with complex geometries. To increas ...

BORCHE BS 200 injection moulding machine was built in 2018 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the efficient production of technical components and everyday products made from plastics of various shapes and for various purposes. A clamping force of 200 tonnes, combined with reliable components, ensures high efficiency even during intensive mass production. The parts are made by injection moulding, a process which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. This method enables the rapid production of parts with complex geometries whilst maintaining high repeatability and a high-quality finished product. The BORCHE BS200-III Plus injection moulding machine can be further equipped with production automation systems that increase the efficiency of the entire  ...

Key data: 3500 kN, 70 mm

Netstal EVOS 3500/2900 - 350T Year: 2010 Model: EVOS 3500/2900 Tonnage: 350T Operating hours: 60,000 h Screw diameter: 70 mm L/D ratio: 27 Injection pressure : 2400 bar Injection volume (max.): 1078 cm³ Mold thickness (min./max.): 700 – 1150 mm Distance between tiebar (H x V): 730 x 730 mm Platen dimensions: 922 x 1086 mm Weight: 25,000 kg

Key data: 10000 , 110