Hydraulic Shear used for sale (140)

Key data: 3100 mm, 6 mm

Max. cutting length ... 3100mm Max. sheet thickness ... 6mm Drive... Hydraulic Main engine power ... 11kW Number of strokes ... 20/min Machine weight... 5500kg L x W x H ... 3900x2560x1560mm The machine is in good condition, possible to test under power,

sheet width: 2040 mmplate thickness: 4,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 3,00 tdimensions of the machine ca.: mControlled backgauge up to 1000 mmSide fence and table extensionsCut length limiterCut edge lightingSharpened bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FOR SALE: AMADA PROMECAM GS 1230 Hydraulic Guillotine Shears – 3050 mm / Up to 15 mm Steel Precision industrial machine – Very little used – Former training centre Pristine condition – Works flawlessly – Ready to use ✅ Technical characteristics: • Model: AMADA PROMECAM GS 1230 •Type: Hydraulic Guillotine Shear • Useful cutting length: 3050 mm • Maximum thickness: 12 mm standard steel, up to 15 mm on steel sheet • Motorized backgauge (numerically controlled) • Cutting angle and blade spacing adjustment • Integrated ball table for moving sheet metal • Hydraulic front holding cylinders • Power: 15 kW / 20 HP – Three phase • Power supply: 400/415 V – 32 A – 50 Hz • Cutting force: 361 kN • Blade stroke: 190 mm •Year: 1999 •Made in Europe – AMADA reference brand Applications: Perfect for industrial boilermaking, shee ...

sheet width: 3050 mmplate thickness: 4 mmweight of the machine ca.: 6.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25199 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs -Mot. Back gauge 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 22.5 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 8500 kg - with: - E. foot switch - Cut line illumination - Rear space protection with light barrier

sheet width: 3100 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3120 mmdown holder: 14 Stückcutting angle: 1°5 no. of strokes: 14 Hub/mincontrol: ENC 100 table width: 500 mmwork height max.: 880 mmoil volume: 170 ltr.total power requirement: 11.0 KWweight: 5550 kgrange L-W-H: 3750 x 1950 x 1650 mm Machine was used for ALU processing no heavy sheet metal processing good condition (!) new price ~ 32.000 Euro----------------------------------------------------Swing cut guillotine shear with fixed cutting angle with DURMA ENC 100 NC control unit manual cutting gap adjustment from the front----------------------------------------------------Equipment:- electro-hydraulic guillotine shears swing cut- with DURMA ENC 100 NC control unit Backgauge preselection - X axis Number of pieces (in automatic mode) Control panel, front left Retraction from backgauge on/ ...

Useful cutting length 4,000mm Cutting thickness 4/7mm Adjustable blade spacing motorized backgauge with 1,000mm stroke programmer Adjustable cutting angle 250mm recess machine in good general condition visible in operation at our headquarters!

sheet width: 3050 mmplate thickness: 10 mmcutting angle: 0,5-3 °Number of hold downs: 18 Stückno. of strokes: 22/7 Hub/minwork height max.: 900 mmtotal power requirement: 20 kWweight of the machine ca.: 8.500 kgdimensions of the machine ca.: 3800 x 2100 x 2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25176 Specifications: - max. working width 2040 mm - max. cutting capacity St 40 5 mm - Cutting gap adjustment - Number of hydraulic hold-downs 11 pcs - Engine backgauge 10 - 700 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 840 mm - Space required including back gauge, without front support arms -ca. W 2500 x H 1450 x D 1650 mm - Weight approx. 3500 kg - with: - E-foot switch - Cut line illumination

sheet width: 3100 mmplate thickness: 13.0 mmthickness at Niro-steel: 8.0 mmdown holder: 14 Stückno. of strokes: max. 11 Hub/mincutting angle: 1°15 work height max.: 770 mmcolumn arm: ? mmoil volume: 300 ltr.control: konv. total power requirement: 15.0 kWweight: 11800 kgrange L-W-H: 4255 x 2250 x 2400 mmFeatures:- Robust electro-hydraulic swing pruning shears- Operation, swivels to the front left- Electro-motorized backgauge on recirculating ball screws Movement by push-button (forwards backwards) including ELGO digital position indicator- Manual quick cutting gap adjustment by eccentric (right side stand)- Machine stand with overhang- 1x long side stop, with mm scale- 2x front support arms, with mm scale- Ball rollers in the front support table- Hinged front finger guard- 1x free-moving foot switch- Rear safety device (protective grille)- 2x front emergency stop button- Operating instr ...

Key data: 2000 mm, 3 mm

Cutting length adjustment, foot pedal, without stop Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out (or in the existing state for 3,500 €) Sheet width: 2000 mm Sheet thickness steel: 3.0 mm Colour: white Machine weight: 2500 kg Dimensions: 2800 x 1800 x 1500 mm with cutting gap adjustment Connected voltage: 16 A Hold-down: hydraulic Column projection: 250 mm Projection: 60 mm Fixed cutting angle Machine Number: 2892

sheet width: 3050 mmplate thickness: 16 mmdistance between columns: 3050 mm: 15-1000 mmcutting angle adjustment: ja °cutting gap adjustment: ja mmconnected load: 30 kWweight of the machine ca.: 14,.5 tdimensions of the machine ca.: 4,0 x 260 x 2,55 mHydraulic guillotine shear with- ELGO control for backgauge- Cutting angle adjustment- Cutting length adjustment- Cutting length limitation (time dependent)- Sheet thickness adjustment- Back gauge with clearance function- Cutting line lighting- Side stop- 3 pcs. support consoles- good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Mitsubishi Max. cutting length ... 3200mm Max. sheet thickness ... 10mm Drive... Hydraulic Main engine power ... 15kW Machine weight ... 11000kg L x W x H ... 4050x2050x1790mm The machine is in good condition, possible to test under power.

sheet width: 1030 mmplate thickness: 12.0 mmthickness at Niro-steel: 8.0 mmblade length: 1050 mmcutting angle: 3.0 Gradno. of strokes: ca. 10 Hub/minback stop - adjustable: 500 mmControl: konv. table height: 900 mmoperating pressure: max. 280 baroil volume: 150 lengine output: 11.0 kWweight: 1900 kgrange L-W-H: 1550 x 1150 x 1600 mm Machine from a maintenance workshop (!)Furnishing:- heavy / robust electro-hydraulic sheet metal plate shears- Machine body in a closed design as an all-steel welded construction- Knife upper cheek slides in a long downward direction over the knife edge. protruding plastic guides- Cutting is done hydraulically via two hydraulic cylinders- The upper beam returns to its starting position in two ways. Spring batteries on the side stands- manual back gauge, adjustable from the rear Adjustment by handwheel, with mm scale- manual cutting gap adjustment- 1x side sto ...

Offer 25079 Specifications: - max. working width 3100 mm - max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 14 pcs - Engine backgauge - E. footswitch - Front angle stop - Stroke rate 15 rpm - Drive 380 V / 22 kW - Table height 800 mm - Space required including back gauge, without front support arms -ca. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

sheet width: 2600 mmplate thickness: 5 mmrear stop: 1000 mmcutting angle: 1°06 °no. of strokes: 45 Hub/minvoltage: 380 V / 50 Hztotal power requirement: 5,5 kWweight: 4500 kgdimensions of the machine ca.: 3600 x 2200 x 1600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3200 mm Maximum cutting capacity steel St40: 6.0 mm Maximum cutting capacity stainless steel: 3.0 mm Mot. Adjustable rip fence: 650 mm Working height: 800 mm Dimensions (length x width x height): approx. 3850 x 1650 x 1750 mm Weight: approx. 6,3 tons

sheet width: 3100 mmplate thickness: 4.0 mmthickness at Niro-steel: 2.5 mmcutting angle adjustment: 1.0 °back stop - adjustable: 10 - 1000 mmadjustment speed: 180 mm/sdown holder: 21 Stückstrokes per minute: 18 - 31 oil volume: 160 LControl: ELGO P8511 column arm: 200 mmdistance between columns: 3050 mm0: max. 300 barvoltage: 400 Vmain drive: 9.0 kWweight of the machine ca.: 4800 kg.dimensions of the machine ca.: 3660 x 2070 x 2140 mm from a maintenance workshopEquipment:- electro-hydraulic sheet metal shear swing cut- machine frame = all-steel welded construction- ELGO NC control model P8511, control panel at the front left for positioning the electro-motoric rear stop target/actual position value input possible adjustment by three-phase motor via toothed belt- support table with ball rollers there are recessed grips between the table plates- front finger guard- hydraulically acting s ...

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3100 mm Maximum cutting capacity steel: 16.0 mm Maximum cutting capacity stainless steel: 12.0 mm CNC control: SP 9 (new) Mot. Adjustable rip fence: 1000 mm Cutting gap adjustment Working height: 1050 mm new knives CE mark Motor power: 30 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2350 mm Weight: approx. 15,5 tons

sheet width: 3100 mmplate thickness: 2 mmrear stop: 1000 mmcutting angle: 1°06 °no. of strokes: 45 Hub/mintotal power requirement: 3,0 kWdimensions of the machine ca.: 3600 x 2200 x 1600 mmweight: 4500 kgEquipment:- Electric motorized backgauge- With digital ELGO position display- Manual cutting gap adjustment- 1x side stop with mm scale- 2x support arms- 1x freely movable double foot switch- Front finger guardSpecial accessories included:- Pneumatic sheet metal holding device for thin sheet metal cutsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel 400 N/mm2: 13.0 mm Adjustable rip fence: 1000 mm Adjustable cutting gap adjustment Adjustable cutting angle adjustment Working height: 940 mm Dimensions (length x width x height): approx. 3700 x 2800 x 1950 mm Weight: approx. 9,6 tons

sheet width: 2540 mmplate thickness: 6 mmrear stop: 900 mmdown holder: 14 Stkno. of strokes: 20 Hub/mintotal power requirement: 10 kWdimensions of the machine ca.: 3100 x 2200 x 2600 mmweight: 5000 kgFeatures:- Central lubrication- Electric rear stop- 1x side stop 2350 mm- 2x front support arms with stop 1700 mm- Front finger guard- Spare blade (used)- Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel: 0.4 - 4.0 mm CNC control: CYBELEC DNC 10 Adjustable rip fence: 100 mm Electronic cutting depth adjustment Recess: 520 mm Working height: 1030 mm Engine power: 9 kW CE mark Dimensions (length x width x height): approx. 2900 x 2300 x 1750 mm Weight: approx. 5 tons

sheet width: 4040 mmplate thickness: 4,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 7,50 tdimensions of the machine ca.: mMotorized adjustable backgauge with digital display up to 1000 mmPneumatic sheet metal supportSide fence and table extensionsCut length limiterCut edge lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Maximum cutting width: 4050 mm Maximum cutting capacity steel St40: 13 mm Maximum cutting capacity stainless steel: 8 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 4600 x 2400 x 2450 mm Weight: approx. 20 tons

sheet width: 3100 mmplate thickness: 6,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMotorized backgauge with digital displayManual kerf adjustmentVariable cutting lengthCutting edge illuminationNew bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity for steel St40: 15.0 mm Mot. Adjustable rip fence: 1500 mm Mot. Adjustable cutting gap adjustment Cutting angle adjustment Working height: 860 mm Motor power: 22 kW Side protective grille with light barrier back Dimensions (length x width x height): approx. 4650 x 3600 x 2050 mm Weight: approx. 13,5-ton

sheet width: 3100 mmplate thickness: 10,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 10,00 tdimensions of the machine ca.: mMotorized backgauge up to 1000 mm with digital displaySide fence and table extensionsCut length limiterCut edge lightingNote: Backgauge is slightly inaccurate (+/- 1 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 mm, 6 mm

Max. cutting length: 3,000 mm Max. sheet thickness: 6 mm steel Motorized backgauge with digital display up to 1000 mm Side stop and table extensions Cutting length limitation Cut edge lighting Hydraulic shear angle adjustment Knife sharpened Weight: approx. 6500 kg

sheet width - max.: 1010 mmplate thickness: 4.0 mm STplate thickness: 2.5 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: max. 20 Hübe/mincutting angle: 1.5 °work height max.: 900 mmControl: ELGO total power requirement: 5.5 kWweight of the machine ca.: 2200 kg. from a maintenance workshop good condition ()Equipment:- Robust NC electro-hydraulic guillotine shear- NC electro-motorized backgauge Includes NC ELGO positioning control TYP 85- Electric cutting length limiter- Manual cutting gap adjustment- 1x side stop with scale- 2x support arms- 1x freely movable foot switch- Original operating instructions Special accessories included:- Pneumatic holding device for thin sheet metal blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24559 Specifications: - max. working width 1100 mm - max. cutting capacity - at 400 N/m² strength 20 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 7 pcs - Manual backgauge 10 - 1000 mm - Front angle stop - Front support arms - Stroke rate 13 rpm - Drive 400 V / 45 kW - Table height 700 mm - Space required including back gauge, without front support arm -ca. W 2100 x H 2250 x D 2250 mm - Weight approx. 7500 kg - with: - E-foot switch - Cut line illumination

sheet width: 3000 mmplate thickness: 6 mmdistance between columns: 3200 mmspeed: . m/minrear stop: 1000 mmtotal power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe backgauge is electric.The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to sale, our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business,please contact us.You can find further offers on our website.Tours are possible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24295 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - Projection 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Motor back gauge with positioning control 20 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 rpm - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm - Space required including back gauge, without front support arms -ca. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - E-foot switch - Cutting Line Illumination - - Cutting Length Selection - Rear area protection with light barrier

sheet width: 3060 mmplate thickness: 8.0 mmthickness at Niro-steel: 6.0 mmdistance between columns: 3100 mmdown holder: 16 Stückno. of strokes: max. 10 - 15 Hub/minoil volume: 160 ltr.cutting angle: 1.6 °back stop - adjustable: 6.0 - 750 mmControl: ELGO P9521 total power requirement: 18.5 kWweight: 6300 kgrange L-W-H: 3900 x 2300 x 1630 mmFeatures:- Robust electro-hydraulic swing beam shear- ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s- 1x stable side stop With T-slot, flip-stop, and millimeter scale- 2x stable front support arms- Electric cutting length limiter Cutting length limiter to increase the stroke rate/min.- Manual cutting gap adjustment Centrally operated on the right side stand- Front support plates- Front finger/interference guard- Inching operation with push buttons on the left c ...

Key data: 2000 mm, 4 mm, 650 mm

Machine Type: Guillotine Shears Manufacturer: Stückmann & Hillen Type: 125.07-4 Year of manufacture: coming soon Condition: used / in working order Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-STÜ-1024 DESCRIPTION We offer you a used guillotine shears from the manufacturer Stückmann & Hillen. Specifications Cutting capacity sheet steel 2000x4mm Weight approx. 3.8t Incl. spare blade (unsharpened) Available from the beginning of December. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

sheet width - max.: 1255 mmplate thickness: 4.0 mm STplate thickness: 2.0 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: ~ 66 Hübe/min.cutting angle: 1.5 °total power requirement: 5.5 kWweight of the machine ca.: 2600 kg.range L-W-H: 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition ()Furnishing:- electro-hydraulic guillotine shears- manual backgauge with analogue position display (scale + magnifying glass)- electrical cutting length limitation- manual cutting gap adjustment- 1x extra long side stop- 2x extra long support arms- 1x free moving footswitch- rear sheet metal slide- User manual (PDF) Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9325278The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Max. sheet width: 2500 mm Max. sheet thickness: 8 mm Weight, approx.: 6400 kg

sheet width: 3050 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmcutting angle: 0.5 - 3.0 °down holder: 18 Stückno. of strokes: 9 / 14 Hub/minback stop - adjustable: max. 750 mmControl: konv. engine output: 10.0 kWweight: 4800 kgrange L-W-H: 3750 x 1600 x 2450 mm maintained condition ()Furnishing:- electro-hydraulic / slide-guided sheet metal shears- front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment- with manual cutting gap adjustment, from the rear- electro-motorized back gauge 10-750 mm- with analogue position display + handwheel for fine adjustment- 1x robust side stop- 1x freely movable foot switch- front finger/encroachment protection- 2x EMERGENCY stop buttons at the front - User manual (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24289 Specifications: - Max. cutting width 3060 mm - Max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjustment screws - Number of hold-downs 15 pcs - Stroke rate 23 to 43 rpm - Front angle stop -Mot. Positioning-controlled back gauge 15 - 850 mm - Cut line illumination - E – Footswitch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

plate width: 2503 mmplate thickness: 4.0 mm STplate thickness: 2.5 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: 15 - 20 Hübe/mincutting angle: 1.7 °work height max.: 900 mmControl: ELGO TYP 85 total power requirement: 8.5 kWweight of the machine ca.: 3400 kgrange L-W-H: 2913 x 2250 x 1760 mmFeatures:- Robust NC electro-hydraulic guillotine shear- NC electro-motorized backgauge with ELGO control unit- Manual cutting gap adjustment- Front support table including recessed grips- 1x sturdy side stop with scale and tilting cam- 2x sturdy front support arms- 1x freely movable foot switch- Front finger guard- Front emergency stop button- Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4050 mm, 10 mm, 1000 mm

brand new, with control SC100T Specifications: max. cutting length 4050 mm max. sheet thickness for ST 45 10 mm Cutting angle 0.5 - 3° degrees Cutting gap adjustment 0.05 - 1 mm Hold-down 23 Back gauge area 1000 mm Stroke rate 7 - 11 strokes Length of the angle stop 1000 mm Weight approx. 13,000 kg Standard equipment: - SC 100T control - Cutting length limitation - Motorized back gauge 1,000 mm - Electronic cutting gap adjustment - Cutting line lighting with wire - Electro-hydraulic cutting angle adjustment via 2 push buttons or CNC - Angle stop 1,000 mm with scale, T-slot and fold-down cam - Scissor table with square supports and roller support - Mobile foot pedal for easy and safe handling - Hydraulic and mechanical overload protection - Finger guard made of round steels with recessed grip - Light barriers and protective fences - Machine according to CE  ...

sheet width: 4100 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmno. of strokes: 12 - 24 Hub/mincutting angle: 1 ° 30 work height max.: 865 mmback stop - adjustable: 1.0 - 1000 mmdown holder: 20 StückControl: ENC 100 M column arm: 50.0 mmoil volume: 200 ltrtotal power requirement: 15.0 kWweight: 11460 kgrange L-W-H: 5230 x 2250 x 2150 mm New price ~ 50,000 euros () Special price on request-----------------------------------------------------------NC electro-hydraulic swing cut shears with DURMA ENC 100 M control manual cutting gap adjustment (eccentric) including pneumatic sheet holding device for thin sheet metal cuts-----------------------------------------------------------Equipme nt:- robust electro-hydraulic swing cut shears- including DURMA ENC 100M NC control unit Back stop pre-selection - X axis Quantity Cutting length limitation Pivoting operation, left front- Monoblo ...

Key data: 3000 mm, 12 mm, 1000 mm

Max. cutting length: 3000 mm Max. sheet thickness: 12 mm steel Controlled backgauge up to 1000 mm Cutting length limitation Cut edge lighting Light barriers for the rear area Spare blade Weight approx. 9000 kg

sheet width: 3060 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3100 mmdown holder: 16 Stückno. of strokes: 20 Hub/minoil volume: 160 ltr.cutting angle: 1.6 °Control: ELGO Number of working hours: ~ 1.100 htotal power requirement: 11.0 kWweight: 5250 kgrange L-W-H: 3800 x 1940 x 1560 mm from a maintenance workshop with only approx. 1.100 operating hours ()Equipment:- electro-hydraulic swing beam shears- ELGO NC control unit for electric back stop Input of target/actual position value possible- NC electro-motoric back stop travel path of back stop X = 750 mm back stop ball screw with no play travel speed 100 mm/sec- electric cutting length limitation cutting length limitation to increase the number of strokes/min.- manual cutting gap adjustment, via eccentric- tip operation with push buttons on the control panel on the left- front support plates with  ...

Compact hydraulic guillotine shears, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the alignment and machining of large workpieces precise and easy. It is operated via a foot pedal, which frees up the hands to align the workpiece. Specifications: Cutting length: 1320 mm Sheet thickness: 3.5 mm Strokes / min: 35 - 47 Number of hold-down devices: 9 Pressure hold-down: 2.5 t Front support arms: 1000 mm Back gauge: 600 mm Cutting angle: 1/2 - 2° Motor power: 5.5 kW Equipment: - High-quality, high-alloy scissor blades with a high chromium content - 2-fluted upper blade, 4-fluted lower blade - Hydraulic cutting angle adjustment - Manual cutting gap adjustment (from 4.5 mm) - Generous support arms with adjustable stop - Side stop with double scale - Feeder work table with ball rollers - Full-length front  ...

sheet width - max.: 2535 mmplate thickness: 4.0 mm STplate thickness: 2.5 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: 20 Hub/mincutting angle: 1.7 °work height max.: 900 mmtotal power requirement: 8.5 kWweight of the machine ca.: 3400 kgrange L-W-H: 2916 x 2250 x 1760 mm Machine from training workshop good / well-maintained condition ()Equipment:- robust electro-hydraulic swing cut guillotine shears- electro-motorized rear stop- electric cutting length limiter- electro-motorized cutting gap adjustment- front support table including recessed grips- 1x stable side stop, with scale and tilting cam- 3x stable, front support arms- 1x freely movable foot switch- front finger guard- EMERGENCY STOP button at the front- operating instructions Special accessories included:- pneumatic sheet holding device for thin sheet metal cutsThe data for this ad was created with ModulMWS - the ...

Hydraulic guillotine shears - ordering machine (delivery time approx. 10-14 weeks) - incl. foot switch, touch screen, rear installation room with light barrier monitoring, cutting gap automatic/electric, cutting angle automatic/electric, hydraulic hold-down device, mot. Back gauge up to 1000 mm depth -Similar to illustrations- Hydraulic plate shear - order machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-

weight of the machine ca.: 16 tsheet width: 3150 mmsheet thickness - max.: 16 mmsheet width - min.: 1,6 mmvoltage: 400 Vrange - high tensile: 3950x2475x2520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3020 mm, 6 mm, 750 mm

Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...

sheet width: 3060 mmplate thickness: 6 mmno. of strokes: 20 Hub/minstroke: 750 mmMotor Capacity: 11 kWoil volume: 160 lweight of the machine ca.: 5.500 kgdimensions: 3860 x 2560 x 1560 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.