5 DOOSAN processing centers used machines

Inv. Num. : 7585 Type: DNM 400 Producer: DOOSAN Created: 2010 Parameters: Control system: Fanuc Switch-on hours: 3042 h Work table length: 920 mm Work table width: 435 mm X-axis travel: 762 mm Y-axis travel: 435 mm Travel Z-axis: 510 mm

1 CNC lathe (lathe) 2 CNC lathe (lathe) 3 CNC lathe (lathe) 4 CNC milling machine (lathe) 5 2x conventional lathe (lathe) 6 Band saw 7 2x Stand drill All machines work perfectly Pick-up or delivery not until the end of July 2024

Key data: 700 mm, 1000 mm

Machine Details Stock-No. 1105-03950 Type of machine CNC Lathe Make DAEWOO DOOSAN Type PUMA 400 M Year of manufacture 2014 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KOREA Delivery time to be agreed Freight basis ex Site Technical details turning diameter 700 mm turning length 1043 mm control FANUC 21 IT turning diameter over bed 550 mm bar diameter 116 mm spindle nose A2 11 turning speeds 15~ 2000 rpm drive capacity - spindle motor 26/22 kW Torque 125 Turret (X-Stations) 12 Shank diameter 32 x 32 mm Drill shank diameter 50 mm Travel -X Axis 362 mm Travel -Z AXIS 2505 mm tail stock YES 120 MM slide. of quill 120 mm Quill Stroke 120 mm taper MK 6 rapid traverse X-axis 16 m/min rapid traverse Z-axis 20 m/min total power requirement 50 kW Additional information 700 X 1000 LENG FANUC 21 ITB CHUCK + CHIP CONVOYER

Key data: 760 mm, 1540 mm

CNC turning/milling center DOOSAN PUMA MX2600ST Year of construction 08-2012 Fanuc 31i-A with Manual Guide i Max. turning diameter: 760 mm Max. swing diameter over bed: 1,000 mm Max. turning length: 1,540 mm Max. bar passage: 76 mm Travel: X1 axis: 630 mm Y1 axle: 230 mm Z1 axle: 1,585 mm B-axis: -120° + 120° X2 axis: 220 mm Z2 axis: 1,515 mm A-axis: 1,550 mm Spindle motor main spindle 22/26 kW Spindle nose A2-8 Max. spindle speed 4,000 rpm Spindle motor sub-spindle 22/26 kW Max. spindle speed 4,000 rpm Spindle nose A2-8 Spindle motor milling spindle 22/18.5 kW Capto C6 Max. spindle speed 12,000 rpm B-axis, 0.001° Tool magazine with 40 tool positions Lower turret, 12-speed BMT65P Max. speed driven tools: 4,000 rpm Cooling by the spindle, 1.5 kW, 2.0 MPA, 21.6 l/min Coolant pump for lower turret, 2.2 kW, 1.0 MPA, 30l/min Coolant for powered tools Co ...

DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy

For sale: Powerful Doosan vertical machining center type Mynx 7500/40, equipped with the well-known control system of the Fanuc i-series including Fanuc Manual Guide i dialog area. This model, with a net weight of 13,500 kilograms, has an X, Y and Z axis displacement of 1,525 x 762 x 625 mm each. The table size is 1,600 x 750 mm. The machine is fully equipped with block guides. The pivot shot is an ISO 40 shot. The machine has a so-called arm changer with 32 positions and is also equipped with cooling through the spindle. As an extra, the machine is equipped with an integrated fourth Nikken axle with counter center. The machine also has a right-hand discharge chip conveyor. On request, you can purchase additional tool holders for the machine. The machine is in excellent condition and for more information please send an email to chrismachinematch.nl

Key data: 1000 mm, 3000 mm

achine details Stock-No. 1105-04069 Type of machine CNC Turning- and Milling Center Make DOOSAN DAEWOO Type PUMA 700 LM b Year of manufacture 2006 Type of control CNC Storage location FRANCE Country of origin KORREA Delivery time IMMEDIATELY Freight basis EX WORK Price Technical details turning diameter 900 mm turning length 3050 mm control FANUC 21 i TB swing dia. 1030 mm Standard Turning Diameter 750 mm Bar Material Dia. 165 mm Spindle bore 110 mm Travel -X Axis 471 mm Travel -Z AXIS 2100 mm Rapid Travel - Longitudinal/Face 15/ 20 m/min Spindle RPM 3000 1/min spindle drive 45 kW turret stations / rotary tool stations 12 / 6 BMT 85 speed of driven tools 3000 1/min total power requirement 62.2 kVA Weight of the machine approx. 22.2 t dimensions of the machine approx. 6.1 x 2.2 x 2.2 m Accessories Chip conveyor YES Parts and total counter Tool holders  ...

Torni CNC, Doosan Puma TW2600, 2016 (low hours), complete with robot, it can be inspected in our warehouse in Gussago BS

Control: Siemens Sinumeric 828 D Turning length: 1,600 mm Turning diameter: 900 mm X axis travel: 470 mm Z axis travel: 1,650 mm Speed: 3 – 1,500 rpm Tool turret: 12 places (all driven) Tool holder: BMT 85P Equipment: Self-centering bezel Conveyor Touchsetter 3-jaw chuck Programmable tailstock Aspirator Coolant pump 20bar with cyclone filter Oil mist extraction

Key data: 700 mm, 5050 mm

CNC Turning Milling Center Manufacturer: Doosan Type 700XLY ll Year of construction 11/20 IBN 2021 Control Fanuc iSeries Plus max. turning length 5050mm max. turning diameter 900mm 12-fold tool turret, all 12 of which are driven Full Y-axis and C-axis Switch-on hours approx. 25,000 on 22.05.25 Spindle hours approx. 5,000 on 22.05.25 Machine is in a very good condition. As accessories there are A large bezel SMW Three-jaw chuck 630mm Face Plate 800mm div. Powered Tools Various steel holders Accessories had cost 80,000 euros Machine is sold due to the poor order situation

Key data: 376 mm, 760 mm

Description CNC turning-milling center Doosan Puma 2600 SYII with Fanuc control i series with accessories The machine has been used little, has about 2000 hours of operation so like new and is available now Additional Accessories Lathe Doosan Puma 2600 SY II -2 tool holders for external turning tool 25x25 -1 tool holder double for external turning tool 25x25 -1 tool holder for frontal machining 25x25 -2 tool holders for internal turning tools (boring rods) diameter 50mm -1 tool holder double for internal turning tools diameter 32 mm -1 tool holder for parting tool -1 tool holder double right for external tool (sub-spindle) -1 tool holder double left for external tool (main spindle) -4 motorized tool holders ER-32 radial (X axis) -5 Motorized Tool Holders ER-32 Axis (Z Axis) -1 motorized tool holder ER-32 radial (X axis) with internal coolant supply -1 motorized tool hold ...

DOOSAN VM 960L CNC machining center was built in 2016 in South Korea by Doosan Machine Tools. The machine on offer is an excellent choice for both roughing and finishing machining of workpieces with a maximum weight of 4500 kg. It is distinguished by a number of state-of-the-art technical solutions, which, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. All machining processes, i.e. drilling, threading and milling, are performed by means of a reliable spindle and cutting tools taken from a 40-position magazine. The very accurately balanced spindle ensures vibration-free operation at all speeds. Its taper is cleaned continuously with compressed air to protect it from chips and coolant. The entire workspace, in turn, has been fully maximised to ensure freedom of operation. The offer also includes a ...

DOOSAN VM 960L CNC machining center was built in 2016 in South Korea by Doosan Machine Tools. The machine on offer is an excellent choice for both roughing and finishing machining of workpieces with a maximum weight of 4500 kg. It is distinguished by a number of state-of-the-art technical solutions, which, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. All machining processes, i.e. drilling, threading and milling, are performed by means of a reliable spindle and cutting tools taken from a 40-position magazine. The very accurately balanced spindle ensures vibration-free operation at all speeds. Its taper is cleaned continuously with compressed air to protect it from chips and coolant. The entire workspace, in turn, has been fully maximised to ensure freedom of operation. The offer also includes a ...

Model L126TI No. of Cyl. L6 Aspiration TI Displacement (Liter) 11.1 Bore x Stroke (mm) 123x155 Output (ISO 3046, 8528 kW(ps)/rpm) 265(360) / 2000 - Dimension (L×W×H) 1235x855x1073 Dry Weight (kg) 1,060 Emission TIER-2

Specifications Classification L136 Cylinder L6 Aspiration NA Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty* 118(160) @ 2200 kW(ps)/rpm Medium Duty* - kW(ps)/rpm Light Duty* - Dimension (L×W×H) (mm) 1266 x 875 x 937 Dry Weight (kg) 743 Emissions Tier 1 Power Range (kW) 118 Speed Range (rpm) 2200 * The value is based on Output (ISO 3046, 8528).

Classification L136TI Cylinder L6 Aspiration TI Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty* 169(230) @ 2200 Dimension (L×W×H) (mm) 1364 x 911 x 937 Dry Weight (kg) 773 Emissions Tier 2 Power Range (kW) 169 Speed Range (rpm) 2200 * The value is based on Output (ISO 3046, 8528).

X-AXIS STROKE MM 2,400 Y-AXIS STROKE MM 960 AXLE STROKE Z MM 800 TABLE SIZE MM 2600X900 ATTACK: BT50 SPEED ROTATION REVOLUTIONS/MIN 12,000 TOOLS N ° 30 FANUC 31I MODEL A CONTROL YEAR: 2012

MAX DIAMETER OF ROTATION: 750 MM MAX DIAMETER SWITCHABLE: 680 MM SWITCHABLE LENGTH: 1195 MM CNC: FANUC 18i-TB MAIN SPINDLE: MAX SPEED. OF ROTATION: 2800 RPM DIN 55026 8 ' ' CHUCK NOSE BAR PASS: 95 MM MOTOR POWER: 30 KW SELF-CENTRING DIAMETER: 315 MM Tailstock: POSITIONING STROKE: 1310 MM RACEWAY: 150 MM TUBE DIAMETER: 115 MM TORRETA TOOLHOLDER: MOTOR POWER: 10-17.5 KW TOOL DIMENSIONS: 25X25 MM BARENI DIA DIMENSIONS: 32-40 MM

DAEWOO MARINE ENGINE V180 TI + GEARBOX 1800 RPM 600 HP

DOOSAN PU126TI 395 HP - 2100 RPM / 0 HOURS AFTER OVERHAUL / NEW PISTON RINGS / CONNECTING RODS / BEARINGS

We are looking for all models of Doosan, Daewoo, Hyundai and Hitachi wheeled excavators for export

We are looking for all models of Doosan, Daewoo, Hyundai and Hitachi wheeled excavators for export

We are looking for all models of Doosan, Daewoo, Hyundai and Hitachi wheeled excavators for export

We are looking for all models of Doosan, Daewoo, Hyundai and Hitachi wheeled excavators for export

We are looking for all models of Doosan, Daewoo, Hyundai and Hitachi wheeled excavators for export