5 BUZULUK rolling mills used machines

Key data: 560 , 1500

Mixing mill 560 x 1500 mm Buzuluk Type 14203 Roller bearing Motor: 132 kW Motorized NIP adjustment

Key data: 400 mm, 1000 mm

Buzuluk 14231 CE conversion in 2010 Antifriction bearing Motor: 55 kW Motorized NIP adjustment Baseplate

Key data: 660 mm, 2100 mm

4 nos. Buzuluk 84" Mills available! Drilled Rolls, Rollerbearings, electrical Nip adj., Bullgear Drive 2 x left Hand Drive 2 x Right Hand Drive Description attached!

Key data: 300 mm, 600 mm

Diameter: 300 mm Length: 600 mm Surface: smooth NIP setting: manual Motor: 30 kW Siemens Dimensions: approx. 1700 x 1560 x 1635 mm Weight: approx. 3000 kg CE marked from 2018 (engine with reverse gear, knee emergency stop)

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

pneumatic Bale cutter max. Width 550 mm max. Length 800 mm Blade stroke 280 mm

1 x BUZULUK 1920mm wide Four-roll 'L' calender - Type: 03506 - Rolls dia 710x1920 mm - Year of manufacture: 1989 - Peripherally drilled rolls - High pressure hot water heating (Steam 1.6 and 3.2 MPa) - Motorised nip adjustment to rolls 1, 2 and 4 (30mm adjustment) - Cross axis on roll 3 (0-30mm) - Roller Bearings - Unidrive gearbox with DC motor to each roll - Rolls 1 and 4: 46 kW - Rolls 2 and 3: 77 kW - Working speed of 4th roll max 60m/min In very good condition.

1 x Buzuluk 240 litre Internal mixer Model: 14630, year: Dec 2008 (body and hopper), Batch size: 200 kgs, Drilled sides, Self sealing type dust seals, Oil injection, Hydraulic drop door with linear actuator and toggle latch, Stellite faced drop door, Two wing tangential rotors. 20in pneumatic hopper. 3 zone TCU Full unidrive gearbox (Make Skoda), with 630kW, 6000V, 739rpm, 73.5A slip ring motor and Oil filled starter. In very good condition.

Tangential nett volume 70 l drop door AC motor 320 kW / 380 V / 50 Hz, 1483 RPM Year 1987

Tangential Chamber volume 70 l, hydraulic drop door AC motor 320 kW / 380V / 50 Hz, 1483 RPM Year 1987 Previously used for PVC.

front roller 600 x 1500 for mixing mill Buzuluk 14240 (KG40) Unused

rear roller 600 x 1500 for mixing mill Buzuluk 14240 (KG40) unused

Input pinion Drawings Nr. 20015-76D2

Central gear Drawing no. 20015-97

Side wheel Drawing no. 20015-81, 20015-82D2

big wheel Drawing no. 20015-19

NIP adjustment nut Drawing No. 14240-216E3

NIP adjustment screw Drawing no. 14240-517

Worm gear (small) Drawing no. 14240-546D1

Screw (small) Drawing no. 14203-461D1

Key data: 300 , 600

Rollers: dia. 300 x 600 mm Roll surface: smooth Rollers type: hollow bored NIP adjustment: Manuel Engine: 22 kW

NIP adjustment screw Drawing No. 14204-1168D1

NIP adjustment screw with more grooves

Bull gear

Pinion Drawing No. 14240-113 z=26