177 WEINIG used machine for sale

Manufacturer: Weinig , Type: Unimat 17 A, Year: 1979, Control: hand, Planing widht mm: 10-170, Planing hight mm: 10-120, Min.-max. workpiece length in mm: 300, Number of spindles: 6, Diameter of the spindle mm: 30, Fast exchange device: no, Rotations of spindles max. rpm: 6000, Separate engine per spindle: yes, Fully suspended drive feeding: no, Year :1979

Manufacturer: Weinig, Type: Conturex 1, Year: 2004, Control: 840 D, Program: Alphacam, Working range X: 1.500, Working range Y-axis: 250, Working range Z: 125, C axis: yes, Number of milling spindles: 2, Milling engine 1 hours power: 10,5, pm: 18.000, Milling engine 2 hours power: 10,5, pm: 18.000, Number of tools per tool-magazine: 36, Year :2004

Manufacturer: Weinig, Type: Unimat 17, Planing widht mm: 170, Planing hight mm: 120, Spindle diameter in mm: 35, Rotations of spindles max. rpm: 6.000, Spindle arrangement: U / R / L / R / O / U, Feeding - kW: 4, 1.Bottom spindle kW: 4, 3.Left spindle kW: 3, 4th spindle on right kW: 3, 5.Top spindle kW: 4, 6th spindle at bottom kW: 4,

Manufacturer: Weinig, Type: Kettenförderssysteme Vereinzelung, Working length mm: 6500 mm, Working widht mm: 2600 mm, Own controller: no, Engine power kW: ca 5, Working hight adjustable mm: 900 mm, FREE TEXT: 5 Mitnehmer Ketten mit 170 mm Abstand,

Manufacturer: Weinig, Type: Längs und Querförderer LKF/1, Bauyeshr : 1995, Control: yes, Working length max mm: 3600, Working lenght min mm: 250, Working widht max mm: 220, Feeding speed max m/min: 30, Feeding speed continous adjustable: no, Working hight adjustable mm: 860 +-, Länge Rückführung mm : ca.5000, Angular transfer: yes, Engine power kW: 2, Year :1995

Manufacturer: Weinig, Type: H 17 AS, Year: 1986, Planing widht mm: 230, Number of spindles: 9, Tool exchange places: yes, Separate engine per spindle: yes, Feeding - kW: 11, Feeding speed min-max m/min: 60, Feeding speed continous adjustable: yes, Table length: ca. 4000 mm, 1.Bottom spindle kW: 4, 2nd spindle on right kW: 4, 3.Left spindle kW: 5,5, 4th spindle on right kW: 4, 5.Top spindle kW: 7,5, 6th spindle at bottom kW: 5,5, 8th spindle at bottom kW: 7, 8th spindle on left kW: 4, 10th universal on left kW: 5,5, FREE TEXT: Inverter for feeding., Year :1986

Tenoning spindle: 1 St. Number of milling agregates: 5 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles -------------------------------------------- Machine is currently being checked! Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ------------------------------------------- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ------------------------------------------- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 13 ...

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----------------------------------------- Machine will be cleaned and completely checked Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw --------------------------- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ---------------------------- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 32 ...

Number of spindles: 6 St. Working width: 230 mm Working height: 160 mm Length of the planing table: 1050 mm Feed motor: 7 kW Feed speed: 6-40 m/min. Weinig Powermat 1200 ---------------------------------------------------------------------- - with infeed automation Weinig wheel magazine EM 100 and linked with outfeed automation Weinig High-Mech A 1 The machine will be completely checked in our warehouse before delivery! Detailed description: ---------------------------------------------------------------------- - 1. Weinig planer and moulder Powermat 1200 ---------------------------------------------------------------------- - Technical data: ------------------------ Working width 20 - 230 mm (with tool flight circle 93 - 163 mm) Working height 10 - 160 mm (with tool flight circle 93 - 163 mm) 1. Spindle ----------------------------- First lower horizontal spindle Motor with brake 7.5 KW ...

Number of spindles: 4 St. Number of tools: 11 St. Spindle diameter: 50,40 mm Spindle length: 285,125 mm length: 4000 mm width: 2000 mm height: 2200 mm Weinig Univar 10/3 folding machine --------------------------------- Machine will be cleaned and chcked before delivery For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjusta ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-24 m/min. total power requirement: 27 kw Dimensions (L/W/H): 3900 x 2200 x 2000 mm weight of the machine ca.: 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ------------------------------------- Machine will be checked ! Technical data summary (please inquire about any additional accessories included) ------------------------------------- Generally ------------------------------------- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed motor: 4 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ------------------- ...

Moulder Weinig PFA 14/7 Specifications: Working width (mm) 140 Waves: 7 1. Shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5. Shaft: up 6. Shaft: down 7th Wave: Uni Wave

WEINIG Rondamat R 934 S/N 934-733, YOC 1996 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment ...

WEINIG Rondamat R 934 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment: Net cash register be ...

Key data: 500 , 2600 , 4

Weinig planing machine Product name: Planing machine Type: AF51 Manufacturer: Weinig Machine number: unknown Year of manufacture: unknown Condition: Used Technical details: - Total table length: 2,600 mm - Feed table: 1,380 mm - Removal table: 1,080 mm - Table height: 810 mm - Chip removal: 0 – max. 8.0 mm - Stop (L x H): 1,250 x 155 mm (obliquely adjustable up to 45° without scaling) - Planing width: 500 mm - 4-knife shaft with 4 strip planing knives - Suction nozzle: 160 mm - Power: approx. 3kW - Weight: approx. 750 kg - 4 knives installed with slight signs of wear - 1 piece Barkomat adjustment gauge - the engine and the knife shafts have been re-mounted - the table lips have been re-milled (approx. 8 mm slots) to reduce the noise level. minimize Machine dimensions/set-up dimensions (L x W x H): 2,600 x 1,350 x 810 mm Transport dimensions (L  ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- - Short summary: ---------------------------------------------------------------------- - 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ---------------------------------------------------------------------- - Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ------------------------------------------------ Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm ...

WEINIG planer/moulder Unimat 22A with 9 heads Year of construction: 1987 Serial number 222-896. The planer is in good working condition and has been partially overhauled, cleaned and subjected to careful technical controls. • The machine has been thoroughly cleaned and technically checked. • Some wear parts have been replaced. • A test run was carried out to ensure functionality. • The machine is bolted to a wooden structure and is ready for shipment. • The planer and moulder is equipped with all the tools and is sold as such. Further technical data of the machine: Maximum planing width: 220 mm Maximum planing height: 140 mm Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Length of the inlet table: 2 m The machine has a total of 9 spindles with the following configuration: 1. Lower spindle / dressing spindle : 5.5 kW 2. Right spindle /  ...

WEINIG four-sided planing machine, PM 17, 5 spindles Machine No. 1329-2356 Year of manufacture: 1982 Working width 170 mm Planning height 120 mm 5 spindles: max. tool length 180 mm, 130 mm Feed table length 2000 mm with planing heads 6 spindles arrangement: 1. Bottom 4 kW 2. Right 3 kW 3. left 5.5 kW 4. Top 5.5kW 5. Bottom 4kW / universal Spindle diameter approx. 35 mm Feed speed 6.5 - 49 m/min. manual lubricant pump Incl. 5 tools for all heads Dimension 4500 mm x 1300 mm x H 1500 mm Weight approx. 3800 kg Technical data subject to correction

TECHNICAL DATA: Width of inlet planer: 1970 mm Working width: 250 mm Working height: 150 mm Spinel: Ø 40 mm Number of Spindles: 5 Cardan shaft drive (2.2 kW) Speed: 6000 rpm Installed power: 22 kW Voltage: 380 V SPINDLE CONFIGURATION: I bottom (4 kW) II-III right-left (5.5 kW) IV above (4 kW) V bottom (4 kW) ACCESSORIES: Complete with tools Miscellaneous Accessories

Code: 0339 Brand: WEINIG Model: PROFIMAT 23/E - CE Standard Automatic 5-spindle moulding machine for the production of frames, furniture parts, windows, doors, moldings, broom handles, wooden toys, and various - CE Standard Features: Heavy-duty base made of solid cast iron Chainless cardan feed: precise, robust, and durable Special feed roller teeth that reduce the depth of entry into the wood Compact feed system Pneumatic pressure on the feed rollers DIGISET WEINIG for left and upper spindles: tool adjustment is performed directly via dual digital displays Technical data: Min/max working width 20/230 mm Max working height mm 120 Feed speed variator 5–24 mt/min Shaft diameter mm 40 Shaft speed rpm 6000 Feed roller diameter 140 mm Pre-planing table length 2000 mm Soundproofing and full protective coating Motorized vertical feed adjustment Side roller pressur ...

Key data: 5 , 450 mm, 120 mm

TECHNICAL DATA: Working width: 450 mm Working height: 120 mm Milling spindle: Ø 40 mm Planing spindle: Ø 50 mm Lower planing spindle with counter bearing Number of spindles: 5 Installed capacity: 56 kW SPINDLE CONFIGURATION: 1: bottom (11 kW) 2-3: right-left (11 kW) 4: upper (11 kW) 5: bottom (11 kW)

SPECIFICATIONS: Machinable tool: max. 230 mm Tool length: max. 240 mm Installed power: 1.1 kW EQUIPMENT: Replacement Grinding Wheels

SPECIFICATIONS: Feed length: 1980 mm Working width: 220 mm Working height: 120 mm Spindle: Ø 40 mm Number of Spindles: 8 Shaft drive (7.5 kW) Installed power: 64 kW Voltage: 380 V SPINDLE CONFIGURATION: 1: bottom (5.5 kW) 2: right (5.5 kW) 3: left (5.5 kW) 4: right (5.5 kW) 5: top (7.5 kW) 6: bottom (7.5 kW) 7: top (11 kW) 8: bottom (7.5 kW) EQUIPMENT: Complete with accessories

SPECIFICATIONS: Machine inlet: 1970 mm Working width: 230 mm Working height: 120 mm Spindles: Ø 40 mm Number of Spindles: 6 Shaft drive Installed power: 38 kW Voltage: 380 V SPINDLE CONFIGURATION: 1: bottom (4 kW) 2-3: right-left (11 kW) 4: top (7.5 kW) 5: bottom (5.5 kW) 6: universal (5.5 kW) EQUIPMENT: Miscellaneous Accessories

WEINIG 5+1 spindle moulder mod. PROFIMAT 23 FORTEC - CE compliant - Complete with ATS device - 1st lower horizontal shaft - 2nd vert. Dx - 3rd vert. Sx - 4th upper horizontal - 5° lower horizontal - 6th universal - Width 230 mm. - Cardan drive - Year 2002

WEINIG 5-spindle moulder mod. PROFIMAT P23E – CE compliant -Composition: - Oriz. Inf. 5.5Kw -Vert. right/left 7.5Kw - Oriz. sup. 7.5Kw - Oriz. Inf. 4 Kw - Width 230mm - ATS system - Year 1997 (CE)

SPECIFICATIONS: Feed length: 1970 mm Machinable width: 230 mm Machinable height: 120 mm Spindle: Ø 40 mm Number of Spindles: 6 Shaft drive (4 kW) Speed: 6000 rpm Installed power: 43 kW Equipped with ATS system for automatic adjustment Voltage: 380 V SPINDLE CONFIGURATION: I bottom (5 kW) II right (11 kW) III left (11 kW) III above (11 kW) IV top (5.5 kW) VI bottom (4 kW) EQUIPMENT: Complete with tools Accessories CE

SPECIFICATIONS: Feed length: 1970 mm Working width: 230 mm Working height: 120 mm Spindle: Ø 40 mm Number of Spindles: 5 Direct drive / cardan (0.25 kW x 3 motors) Speed: 6000 rpm Installed power: 22.9 kW Voltage: 380 V Spindle configuration: I Bottom (4 kW) II Right - Left (7.5 kW), Left equipped with electronic control III Top (5.5 kW) equipped with electronic control IV Bottom (4 kW) EQUIPMENT: Complete with tools

Key data: 6 , 190 mm, 120 mm

SPECIFICATIONS: Feed length: 1900 mm Machinable width: 190 mm Machinable height: 120 mm Spindle Ø 35 mm Number of Spindles: 6 Chain drive SPINDLE CONFIGURATION: Bottom (3 kW) Right (2.2 kW) Top (4 kW) Bottom (4 kW) Right (4 kW) Left (4 kW)

SPECIFICATIONS: Length of pre-planer machine inlet: 2200 mm Machinable width: 230 mm Machinable height: 120 mm Spindle: Ø 40 mm Number of Spindles: 5 Cardan shaft drive Speed: 8000 rpm Voltage: 380 V Spindle configuration: 1: Bottom (5.5 kW) 2: Right (5.5 kW) equipped with PowerLock HSK 3: Left (5.5 kW) equipped with PowerLock HSK and electronic control 4: Top (5.5 kW) with PowerLock HSK and electronic control 5: Bottom (5.5 kW) equipped with PowerLock HSK EQUIPMENT: Complete with milling