98 WEILER used machine for sale

Distance between centers: 500mm, center height: 140mm, turning diameter over bed/cross slide: 295mm/155mm, spindle bore: 36mm, speed: 3550rpm, tailstock taper: MK3. Machine dimensions X/Y/Z: approx. 1500mm/800mm/1250mm, weight: approx. 700kg. On site inspection is possible.

Weiler Commodor – lead and pull spindle lathe (partially overhauled, built approx. 1990) Condition: Partially overhauled, very good general condition Year of construction: approx. 1990 Manufacturer: Weiler Model No.: Commodor Machine Type: Lead and Pull Spindle Lathe Technical data (approx. information): Max. turning diameter over bed: 380 mm Max. turning diameter over support: 190 mm Max. turning length: 1000 mm Bar Passage: 56 mm Speed range: 25 – 2000 rpm Spindle Nose: A2-6 Drive power: 4.0 kW Tailstock: MK4 Automatic longitudinal and flat feeds: 0.011 – 0.80 mm/rev Thread ranges: Metric: 0.3 – 10 mm Inch: 80 – 2 3/4 G/" Diametrically Pitch: 80 – 5.5 Dp Module: 0.2 – 5 Dimensions (L x W x H): 2200 × 1200 × 1800 mm Weight: approx. 1500 kg ⚙️ Equipment & Accessories: 3-Axis Digital Display SINO (New)  ...

Conventional precision lathe WEILER "CONDOR VC" With 3 axis digital display Siemens Year of Make: 2012 Spindle bore: 56 mm Center width: 800 mm Circumference Ø over bed : 205 mm Speed range: 30 – 3500 rpm With the following accessories: Multifix Tool Holder Chip backsplash wall with interior lighting Coolant Setup 3 jaw chuck 0 200 mm Feed protection Moving Lynette 0 approx. 150 mm Tailstock with extendable drill quill Operating instructions

A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible.

Key data: 165 mm, 330 mm, 2800 U/min

WEILER Condor lead and pull spindle lathe (overhauled) Circumferential diameter over bed 300 mm Center width 800 mm Turning diameter over carriage 170 mm Gr. workpiece weight between the tips 100 kg Bed width 240 mm Spindle bore 38 mm Spindle speeds 24 - 2800 rpm Spindle motor 3 KW Z-travel 800 mm X-travel 170 mm Z1-travel 100 mm Lead screw diameter 24 mm Thread pitches: 35 Metric 0.35 - 12 mm 40 Witworth 2 - 45 Gg / " 25 Module 0.2 - 4 Module 32 Diametrical Pitch 5 - 90 D.P. Tailstock quill stroke 110 mm Tailstock quill diameter 50 mm Tailstock quill cone 3 MK 2-axis digital display 3-jaw chuck Multifix holder B with 8 cassettes Rotating grain tip Tailstock Thread Device: Metric, Witworth, Module, Diametral Pitch Geometrically outdated!

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - ...

turning length: 800 mm turning diameter: 280 mm turning diameter over slide rest: 150 mm spindle bore: 42.0 mm tailstock quill taper MT: 3 MK bed width: 208 mm turning speeds: 42 - 2022 U/min spindle taper: DIN 55027/5 quill stroke: 90.0 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 750 kg range L-W-H: 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip spla ...

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - ...

turning length: 1000 mm turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm number of spindle speeds: 25 - 2000 U/min. turning speeds: 18 Stk. spindle bore: Ø 56,0 mm tailstock quill taper MT: DIN 228 / MK 4 quill stroke: 150 mm bed width: 310 mm spindle taper: DIN 55027 / 6 feeds - longitudinal: 0,022 - 0,8 mm/U feeds - cross: 0,011 - 0,4 mm/U thread: M 0,3 - 10,0 mm voltage: 380 V total power requirement: 7,5 kW weight of the machine ca.: 1600 kg Basic functions are available Machine with various leaks Sold in current condition at a special price ! Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. - machine video - https://www.youtube.com/watch?v=zCGu4i6V5dM Furnishing: - robust lead and pull spindle lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX steel holder -  ...

Key data: 180 mm, 2000 U/min

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

turning diameter over bed: 280 mm turning diameter over slide rest: 150 mm turning length: 800 mm turning speed range: 26 - 2000 U/min spindle bore: 24 mm total power requirement: 0,8 / 1,6 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,60 0,70 1,20 m 1. Hand - School Machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip width: 430mm Tip Height: 120mm Spindle bore: 23mm Spindle speeds: 60-3000 RPM Short taper spindle head DIN 4 Tailstock MK2 Feeds from 0.03 to 2.5 mm Weight approx. 360 kg New Aikron 3-axis digital display, brake of spindle motor renewed, technically checked. Accessories: Collet device, lathe chuck Quick-change steel holder 

turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm turning length: 1000 mm total power requirement: 7,5 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,511,5 m No. 5291 1 used lead and feed spindle lathe WEILER Commodor 75 GS working range: Ø 380/190 x 1000 mm drive: 7,5 kW digital display spindle bore 56 mm Speed range 13 - 2000 min-1 3-jaw chuck Multifix B Chip tray documentation Space requirement approx. 2.5 x 1 x 1.5 Weight approx. 1700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Weiler W2 hollow: 280 mm centre height: 440 mm bed width: 320 mm weight of the machine ca.: 200 kg : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 150 mm turning length: 500 mm control: total power requirement: 4 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: . mm centre distance: ca. 400 mm centre height: ca. 125 mm turning speed range: 80 - 3000 U/min number of speeds: 18 spindle bore: 24 mm tailstock quill taper MT: 3 weight: ca. 400 kg dimensions: ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter: 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws, collet chuck device incl. collets 1-20 mm (exept 5 and 10 mm) with 1 mm gradient Multifix size A with 3 interchangeable holders, chuck protection with shutdown The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Year of construction approx. 1988 Center height 120 mm Center width 430 mm Speed: 60 - 3000 rpm in 18 gear stages Spindle Passage 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feeds from 0.03 to 0.15 mm /rev Possible Threads Metric, Inch, Module and Diametrical Pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m

Machine type: Lathe - cycle-controlled Manufacturer: WEILER Type E30 Year of manufacture 1991 Weiler control Country of origin Germany Additional information Cycle-controlled lathe HAMLET - E30 Technical details Turning diameter max. 330 mm Turning length 750 mm Weiler control Center height 165 mm Circumferential diameter over bed 330 mm Circulation diameter max. via face slide 160 mm Slide travel 180 mm Bed slide longitudinal travel 395 mm Main spindle: Speed range - main spindle 1 - 4,500 rpm/-1 Drive power - main spindle 9 / 11 kW Max. torque 165 Nm Spindle head DIN 55027 / 5 Spindle diameter in the vord. Bearing 70 mm Spindle bore 40 mm Usable rod diameter ( - ) mm Tool carrier: Type MultiFix Turning chisel shank cross-section 20 x 20 mm Tailstock: Quill stroke 110 mm Quill diameter 50 mm Tailstock mount MK 3 Feeds: Rapid traverse max. 10 m/min Fee ...

Universal lathe of the Weiler brand suitable for tooling, fixture construction, training and mould making Tip Height : 280mm Speed :48-2500 rpm Tip height : 280 mm Circumferential diameter over bed : 570 mm Circulation diameter over face slide : 340 mm Center width : 1,000 mm Rhqel FULCRUM SHAFT Spindle head DIN 55027/DIN ISO 702-3 : Gr. 8 Spindle bore : 83 mm Spindle diameter in front bearing : 120 mm MAIN DRIVE Drive power 60 %/100 % ED : 15/12 kW Speed range : 1 – 2,500 rpm Number of speeds : infinitely variable FEED RANGE Number : infinitely variable Longitudinal : 0.001 – 10 mm/rev Plan : 0.001 – 10 mm/rev Longitudinal feed force : 10,000 N Feed force plan : 7.000 N Max. longitudinal rapid traverse speed : 6/3 m/min THREADING AREA Metric threads : 0.1 – 400 mm Inch thread : 56 – 1/4 TAILSTOCK Quill ...

UD 24 CNC YOC 1990 Condition: well-maintained Year of Make: 1990 Control: Bosch CC200 Max. turning diameter with jaw chuck: Ø110 mm Max. turning length: 180 mm Bar passage: Ø24 mm Main spindle: 5,000 rpm / 5kW Tool turret: 8-cavity VDI20 W/D/H: 1,830 x 1,435 x 1,625 mm Weight: 1,600 kg Bar feeder: Ø24 x 3,000 mm Bar feeder W/D/H: 4,800 x 900 x 1,300 mm Equipment: - Collet + jaw chuck -Tailstock - IRCO Bar Feeder - Parts catcher - Optics for tool measurement - 8 pieces of VDI mounts

turning diameter: mm turning length: mm swing diameter over bed slide: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 380 mm turning diameter over slide rest: 0 mm turning length: 950 mm centre distance: 1000 mm centre height: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 165 mm, 750 mm, 2800 U/min

Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 8 speeds from 220 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 16 speeds from 120 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          450 kg

Tip distance approx.                                                    400 mm Tip height above bed 130 mm 12 speeds from 125 – 2800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Ref. -No.: 10367 Manufacturer: WEILER Year of construction: 1996 Type of control: CNC Control: Siemens Storage location: Halberstadt Country of origin: Germany Turning Speeds: 500 RPM Machine length: 7000 mm Machine width: 2300 mm Machine Height: 2600 mm Weight Of The Machine Ca.: 9,25 t Spindle Taper: 6 Mk Travel quill: 300 mm Bed width: 800 mm Turning Length: 3000 mm Turning Diameter Over Bed: 900 mm Swing Diameter Over Bed Slide: 530 mm Spindle Bore: 254 mm Spindle power: 45 kW Tailstock - Insertione Into The Sleeve: 140 Ø Max. Workpiece Weight: 5000 kg Further information: Machine can be inspected under power.

A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...

turning diameter: 720 mm turning length: 2000 mm control: Siemens 805 greates pass round over bed: 720 mm bed width: 480 mm spindle diameter in front bearing: 150 mm spindle bore: 106 mm swing diameter over face slide: 430 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.