3 WALTER dividing units used machines

Key data: 200 mm

Face plate 200 mm, partial accuracy +/- 15", incl. Servo motor with hydraulic clamping Fixed tailstock Tip height 200 mm

rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, dividing head with: three-jaw chuck -Type: UTA 160 N -Three-jaw chuck: Röhm Ø 200 mm -Spindle bore: Ø 38 mm -Dimensions total: 625/580/H285 mm -Weight: 122 kg

rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, dividing head with: three-jaw chuck -Type: UTA 160 N -Three-jaw chuck: Röhm Ø 200 mm -Spindle bore: Ø 38 mm -Dimensions total: 625/580/H285 mm -Weight: 122 kg

rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, dividing head with: three-jaw chuck -Type: UTA 160 N -Three-jaw chuck: Röhm Ø 200 mm -Spindle bore: Ø 38 mm -Dimensions total: 625/580/H285 mm -Weight: 122 kg

1 piece of plan knife head 210 mm 12 Cutting 1 piece corner corner fraeser WALTER 200 mm, F2010 12 cutting Further: Diverse crankshaft fraeser GFM

2 stubof disc sores WALTER 125 mm, F2052 1 stueck prism fraeser Walter F2052-460 170.6 / 171.2 2 piece disc freser WALTER 142 mm, F252-925

Cylindrical storage tank, factory new Capacity: 60 cbm / Medium: Fuel oil Material: S235JR (St 37.2) raw inside, blasted outside, primed and painted in RAL 7035 - light grey Dimensions: 2,500 mm diameter, 12,650 mm full length Design: according to DIN 6616/2 or DIN EN 12285-2, double-walled Test pressure inner tank 2 bar test overpressure Double jacket 0.6 bar incl. control fluid in double jacket for above-level storage with test certificate and documentation Container equipped with GOK Lag 2000 and limit sensor as overfill protection Equipment: 1 dome 600 mm li.W. with cover, gasket and screws 3'' filling cable with TW coupling 3'' Vent with cap 1 1/4'' Suction line with reduction to 1'' 1'' for limiter GWG 23-Ro 1'' nit dipstick 2'' reserve 1 pair of permanently welded steel saddle feet 1 suspension ladder with pedestal, galvanized according to UVV  ...

Jupiter JU 45 Walter Plant Machines Nr: + # 2055 Number of baking tongs 45 Upper engraving 5 x 5 mm Underengengravings 5 x 5 mm Edge yes Tool 22 ° Gas Propan Location: Germany The machine is used to make sweet, rotated squirrels with or without a rim and is sold with a tool for 22 °. The conveyor belt and stacking table are included. The machine is currently in storage.

Waffle squirrel machine Walterwerk Jupiter JU 72 Price VB Built in 1988 Location Germany Energy supply: - Gas: natural gas - Number of baking plates: 72 - Engraving Outside: 10 x 10 mm - Engraving Inside: 10 x 10 mm - Plate size: 250 x 250 mm Machine consists of: oven, crossband, heart on heart device, packing tape Machine is currently stored.

centre height: 125 mm spindle bore: 27 mm taper in dividing head spindle: MK 4 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal dividing head WALTER mounted on a SINUS-table WELK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 125 mm spindle bore: 27 mm taper in dividing head spindle: MK 4 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal dividing head WALTER mounted on a SINUS-table WELK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 125 mm spindle bore: 27 mm taper in dividing head spindle: MK 4 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal dividing head WALTER mounted on a SINUS-table WELK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 125 mm spindle bore: 27 mm taper in dividing head spindle: MK 4 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal dividing head WALTER mounted on a SINUS-table WELK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 125 mm spindle bore: 27 mm taper in dividing head spindle: MK 4 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal dividing head WALTER mounted on a SINUS-table WELK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 125 mm spindle bore: 27 mm taper in dividing head spindle: MK 4 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal dividing head WALTER mounted on a SINUS-table WELK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 125 mm spindle bore: 27 mm taper in dividing head spindle: MK 4 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal dividing head WALTER mounted on a SINUS-table WELK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 125 mm spindle bore: 27 mm taper in dividing head spindle: MK 4 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal dividing head WALTER mounted on a SINUS-table WELK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 125 mm -Height: 30 mm -Socket: Ø 30 mm -Number: 1 cutter -Price: complete -Weight: 2.2 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Piston: Ø approx. 40 mm -Piston rod: Ø 20 mm -Connection piston rod: M16x1.5 -Dimensions: 55/H260 mm -Weight: 1.45 kg

Walter AG Helitronic Power CNC Universal 5-Axis Tool Grinding Machine CNC control HMC 400 CNC X-axis travel 400 mm Y-axis travel 250 mm Z-axis travel 580 mm C-axis (table rotation) ± 200° Max. grinding wheel diameter Ø 200 mm Spindle speed (grinding) 3000 / 6000 rpm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 400 mm -Height: 170 mm -Center bore: Ø 48 mm -Weight: 150 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 160 mm -Number of teeth: 10 - Carbide indexable inserts: 16 mm -Recording: SK50 -Weight: 14 kg

end mill, end mill, milling cutter -Outer diameter: 80 mm -Radius: 4 mm -Teeth: 6 -Weight: 1.6 kg

End mill, end mill, milling cutter, indexable inserts -Outer diameter: 50 mm -Teeth: 4 -Weight: 0.5 kg

Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 63 mm -Fresh height: 49 mm -Mounting hole: Ø 22 mm -Weight: 0.75 kg