59 WAGNER used machine for sale

ID3650 Wagner NFK2000 year/Baujahr 1998 Dust extraction system, chain filter, with rotary valve and spray water extinguishing system, raw gas volume 43,000 cbm/h, filter area 373 sqm, 250 filter bags Dedusting system, chain filter, with rotary valve and spray water extinguishing system, raw gas volume 43,000 cbm/h, filter area 373 sqm, 250 filter bags

Manufacturer: Wagner / J. Wagner GmbH Type: SuperFinish SF 23 Plus Voltage: 230 V AC Frequency: 50 Hz Motor power: 1.3 kW Maximum flow rate: 2.6 l/min Maximum operating pressure: 180 bar Maximum nozzle size: 0.023" Weight: 29 kg Technology: Diaphragm pump (airless) Suction: Top tank or rigid suction system Workable materials: varnishes, primers, glazes, impregnations, oils Special: Brushless motor, low-maintenance, robust design for professional applications

Used lathe from Wagner Wagner WDE 500 Lathe, cycle-controlled Only approx. 1700 operating hours Turning diameter 500 mm Turning length 1500 mm Control Siemens 802 C Circumferential diameter over bed carriage 280 mm Spindle bore diameter 82 mm Number of Controlled Axes 2 Speed range 20- 3000 rpm Rapid traverse speed 5 m/min Number of receptacles in the turret 1 Multifix "C" Tailstock Yes MK 5 Drive power 7.5 kW Machine weight approx. 3.0 t Dimensions L x W x H 3.3 x 1.7 x 1.7 m Cycle-controlled CNC lathe in good condition. Accessories: - Coolant device - Basic holder - 3- Jaw chuck - various PARAT tool holders

Drilling capacity: 35mm, drill spindle taper: MT4, quill stroke: 285mm, reach: 300mm-1000mm, speed: 2500rpm, arm length: 500mm, spindle-to-base plate distance: 1000mm, base plate dimensions X/Y: 1150mm/780mm. An on-site inspection is possible.

BAZ Wagner Eumach EBM 3200 BJ2009

Bagging machine for valves and open bags, Fabr. Wagner Oberursel, Type:WAMA SP-Standart Plus. Weighing range 5-30 kg, Product contact in stainless steel, Many accessories available

An older Wagner bagging system for non-lumpy bulk materials including an automatic scale is available. An on-site inspection is possible.

band width: 221 mm length in total: 1.000 mm weight of the machine ca.: 300 kg : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Axis: 3 serial number: 84095 tool taper: BT40 toll turrets: 12 table surface area: 1300 x 400 mm no. of flutes: 3 T-Nuten T-slot - width: 18 mm control: FANUC dimensions: ca. 3000 x 2500 x 2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Wagner, Type: Finisch 500, Year: ca.2005, Wasserbasierend Lacke: yes, 2K-Lacke möglich: yes, Elektr. pump: yes, Laquer reservoir litres: ca.10 Liter, Flushing circuit: yes, Movable: yes, Spray gun manufacturer: Wagner, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 1, Laquer system - airless: yes, Electrical power consumption kW: 2,8, Transmission ratio: 250 bar, Conveying output l/min: 5,7, Delivered checked: yes, Wight approx. kg: 52, FREE TEXT: 220 Volt/2,8 Kw/Gewicht 52 Kilo/zusätzliche Schläuche/2 Stück Sprühlanzen/ , Year :ca.2005

Manufacturer: Wagner, Type: GM 200, Spraying heads - total: 1, Compressed air bar max: 250, Laquer reservoir litres: 20, Spray gun manufacturer: GM 2000, Spraying stations: 1, Laquer circles: 1, Laquer system - airmix: yes, Electrical power consumption kW: 0,76, Wight approx. kg: 32,

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 400 mm, 90 mm

Electro-Permanent Magnet Clamping Plate Type 1150V-40/60-14

Offer 24402 Specifications: - Drilling capacity in steel 50 mm - Drilling spindle holder MK 5 - Drilling spindle stroke 315 mm - Projection min / max 350 / 1600 mm - Column diameter 350 mm - max. / min. – distance: - Spindle – base plate 350 - 1250 mm - Vertical stroke of the boom 580 mm - 16 spindle speeds 25 - 2000 rpm - Feed rates 0.04 - 3.2 m/rev - Drilling spindle drive 400 V / 4 kW - Lift drive 1.5 kW - Column clamping 0.75 kW - Dice table - Coolant device - Space requirement approx. W 2490 x H 2645 x D 1060 mm - Weight approx. 3500 kg

ID2841 Wagner WS22 year/Bauahr 2010 ran only a little 3.7t Shredder, 22 KW Shredder, 22 KW

used canning press / packaging press Manufacturer: WAGNER Type: WDSP 7000 Year of construction: 1993 specifications: Pressing force: 70 t Specific pressing pressure: 318 kg/cm² Drive power: 15 kW / 400 V Duct format: 550 x 400 mm Filling opening L x W: 1,150 x 550 mm Compaction chamber: 700 x 550 x 400 mm Total stroke: 2,100 mm Machine length: approx. 5,500 mm Machine width: approx. 1,920 mm Capacity: approx. 1.5 t/h (depending on material) Package size, WxHxL: 550 x 400 x 280 - 550 mm Package weight: approx. 20 - 40 kg (depending on the setting of the package length) Machine weight: approx. 3,500 kg

Electromagnet with large depth action for extracting ferrous parts from a material stream, oil-cooled design. Including control cabinet with 22 V DC power supply (type: 312-220/20, for connection to 400 V / 50-60 Hz) and overhead duo-rail installation (ca. 4.5 m long x 2.5 m high) for moving the magnet. By switching off the magnet above the drop point attracted ferrous parts are removed.

used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW

used non-ferrous separator Manufacturer: WAGNER Type: 0428-25/60 Machine No.: 214401 Year of construction: 1994 specifications: Conveying width: approx. 600 mm Throughput: 40-65 m³/h Belt speed: 0.12 m/sec to 1.3 m/sec Weight: approx. 1,200 kg Protection class: IP 54 (control device) Motor rotor drive: 3.7/4.7 kW Motor belt drive: 0.75 kW

Radial Drilling WAGNER type PRC 35 Spindle CM4 Spindle exit: 220 mm Spindle speed: from 32 to 2500 RPM Arm/trolley travel: 700 mm Year of construction: 1989 Column diameter: Ø 230 mm Max height table/spindle nose: 1000 mm (table in high position) Automatic descent Hydraulic locking of the column rotation + trolley Mechanical locking of the up/down Cube dimensions: L 800 x W 450 x H 450 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 900 x 2250 mm in high position Weight: approx 2 T

OVERHAULED - Power: 10,9 / 7,2 kW - Amperage: 49,3 / 32,5A - Voltage: 220V. DC - L x W: 1.600 x 1.300 mm - Conveyor belt: 1.400 mm - AA.: 2.530 mm - With Transformator rectifier from 380V. AC to 220V. DC - Overband separator is sandblasted and painted.

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis WAGNER VMC 1400 was manufactured in 2007. It features a spindle power of 28 kW, maximum spindle torque of 230 Nm, and a spindle speed up to 4000 rpm. It includes a 4th axis for machining workpieces up to 1100 mm. Ideal for complex machining tasks. Contact us for more information about this machine.

This WAGNER FCL 3280 was manufactured in 2002. It features a spindle bore of 134 mm and a spindle speed range up to 1200 rpm. The machine supports a maximum workpiece weight of 1800 kg with tailstock and steady rest. It offers rapid traverse rates of 10,000 mm/min for both Z and X axes. If you are looking to get high-quality turning capabilities, consider the WAGNER FCL 3280 machine we have for sale. Contact us for more information.

This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information.

This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 × 1600 × 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us.

WAGNER WMC 600 L CNC machining center was built in 2021 in Germany by Maschinen Wagner Werkzeugmaschinen GmbH. The machine is used for precision machining of workpieces with a maximum weight of 300 kg. All machining processes are performed by means of many state-of-the-art components, which guarantee the achievement of workpieces with high repeatability and excellent precision. These include, among others, a reliable high-speed spindle, a robust work table and a SIEMENS CNC control with all the necessary functions. The WMC 600L CNC vertical machining center weighs 3500 kg. Technical specifications of the WAGNER WMC 600 L CNC milling machine - feed in the X/Y/Z axis: 600/400/450 mm - rapid traverse in the X/Y/Z axis: 24/24/20 m/min - work table dimensions (L x W): 800 x 400 mm - maximum workpiece weight: 300 kg - maximum spindle rotational speed: 8000 rpm - minimum spindle rotati ...

WAGNER FCU 1600 universal milling machine manufactured in Germany in 1998 is designed for precision machining of workpieces in X,Y,Z axes with feeds of 1200 mm (X axis), 700 mm (Y axis) and 500 mm (Z axis). The machine characterised by its high reliability and efficiency performs the milling of workpieces on a large work table with a length of 1600 mm and a width of 500 mm using a precision spindle rotating at a maximum speed of 2050 rpm. The milling machine is also equipped with measuring rulers and digital readouts. The total weight of the machine is 4000 kg. Technical data of the WAGNER FCU 1600 milling machine - feed rates in the X/Y/Z axis: 1200/700/500 mm - feed speed in the X axis: 10-1000 mm/min - feed speed in the Y axis: 10-1000 mm/min - feed speed in the Z axis: 5-500 mm/min - rapid traverse in the X/Y/Z axis : 3000/3000/1500 mm/min - working table dimensions (L x W): ...

This WAGNER WDE 500 was manufactured in 2007. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Consider the opportunity to buy this WAGNER WDE 500 horizontal turning machine. Contact us for more information.