rmh granulation plants used for sale

This machine is particularly suitable for the processing of electric wastes with PVC and rubber. Hole Guide for small diameter from 1 to 10 mm. Quick clamping diameter setting for the large diameter. Adjustable pressure roll continuously over a quick Collet with one hand adjustable. Holes on the base plate to the fasten the machine on a table or work bench.

Automatic control: At the push of a button, the machine automatically closes the pre-loading box and the upper Lid (the pestle is extended). Then the front lid opens and the bale is ejected. Then the front lid (the upper one) closes The lid opens and the pestle goes back and the machine waits for another push of a button (filling the pre-load box). Metal press RMH 33 S_ 30 x 30 (new machine type: metal press) Manufacturer: RMH Type: RMH 33 Package dimensions in cm: 30 x 30 x material Package Weight: 30 - 50 kg Total weight: 5500 kg Dimensions Box (WxHxL): 30 x 50 x 100 cm Dimensions Machine (WxHxL): 120 x 85 x 410 cm / without preload box Cycle time: 60 seconds Drive: 30 KW Compression force: 60 T Horizontal ramming compression force: 100 T Working pressure: 300 bar Control: Automatic

The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...

Dear Sir or Madam, for you in the offer : Granulator/cutting machine available directly from stock! Can be used in cable processing/cable recycling, plastic shredding and destruction of plastic and plastic parts Granulator/Granulator/Granulator Type: RMH 16/22 VGA _ 4 KW Drive Power (See table for more data) Other granulator/cutting machine on request) RMH 16/22 VGA/drive power: 4 KW Features RMH Granulator: - A knife set is installed in the RMH Granulator RMH. - A sieve insert is installed (perforation as desired.). - The following screen inserts are available in stock: 1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm - V- Section Geometry - Lenze Electric Motor / Schneider Electric Box and Circuit Breaker - Easy tilting of the filling hopper - Available with wheels/2 x fixed castors/2 x brake rollers or adjustable rubber-mounted feet - Available with different bays 1) ...

The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly  ...

Table machine RMH 52 for peeling cables. 18 meters per minute, 230 V Diameter of cable: 1-52 mm

Table machine RMH 65 for peeling cables. 18 meters per minute and 230 V 25 meters per minute and 400 V diameter of cable: 1-65 mm

Table machine RMH 65 Q for peeling cables. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-65 mm

Table machine RMH 85 Q to peel by cable. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-85 mm

Barrel press RMH 200 Electric motor: 5.5 KW, 400 V, 50 Hz Pressure: 25 T Press cycle: 58 seconds W x D x H: 1200 x 1000 x 2800 mm

This machine is particularly suitable for the processing of electrical waste with PVC and rubber. Diameter range 2 - 115 mm Cutting speed 35 meters per minute Weight 350 kg

This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min

RMH G 60 New Manufacturer: RMH Roller cutting width: 2000mm Roller cutting height: 1200mm Dimensions ( L x W x H ): 3100 x 1300 x 2500 mm Drive: 11 KW Manual and automatic working procedure Two-handed operating system Cutting force: 2 x 30 cylinders (60 tons cutting force) Total weight: 4200kg

RMH G 25 New Manufacturer: RMH Roller cutting width: 1200mm Roller cutting height: 1300mm Dimensions ( L x W x H ): 2200 x 1300 x 2500 mm Drive: 11 KW Manual working procedure Two-handed operating system Cutting force: 25 tons (1x cylinder) Total weight: 3600kg

Dosing container 10.5m³ capacity Steel grade S355 Overall channel low-stress annealed 10mm Hardox 450 wear protection in the gutter bottom 2 x Unbalance Motors Various hood options, possibly with extraction connections Electrically driven slide for dosing For material eg: copper and plastic according to photo, but with drive and painted Other options: 3-Sided Wrap Guard 400mm Hood according to drawing Control box for stand-alone operation, with FU without Hardox wear protection Channel without container, frame, etc., incl. drives Reserve drive

The line consists of the following components: 1 - Single-Screw Extruder (Ankle) - Type :Single-screw extruder (Ankle) - Description : Gentle compression through optimized screw design. Output up to 120 kg per hour. Original manufacturer drawings available. - L/D Ratio : 60/30 - Motor Type MDFQARS 132-32 with insulated B bearing - Gearbox Type : FZ 600.2-Z-ED 60 - Control System: EXTRUSION PACK control unit by RESOTEC. Has functioned very well in operation. 2 - Water Cooling Bath - Description :Water bath cooling line with continuous cooling water supply. High-capacity plate heat exchanger included. - Tank Capacity : 440 liters (at full fill) - Cooling Control :Controlled via continuous cooling water feed - Width : 50 cm - Depth : 35 cm - Length : 252 cm - Height-Adjustable Feet (current setting) : 72 cm 3 - Granulator - Manufacturer : C.F. Scheer and Cie - 70435 Stuttgart, Germany ...

Professional organic waste recycling and fertilizer production line available for immediate sale.This complete installation is designed to transform poultry, cattle, or pig manure and organic waste into high-quality granulated organic fertilizer pellets. EcoCert compliant output. Produced in 2022. Fully operational and well-maintained. Technical Specifications - Capacity: up to 5 tons per hour - Condition: Fully operational, well-maintained - Year of Production: 2022 - Output: High-density organic pellets, EcoCert compliant Complete Production Process Compost Processing - Grinding - Mixing with Probiotic and Additive injection capability - Granulation - Drying - Cooling - Automated Packaging Applications - Poultry manure processing - Cattle manure processing - Pig manure processing - General organic waste recycling Key Investment Benefits Fast ROI: Converts waste management cost ...

BRIKOL BT 1000 granulation line was built in 2019 in Poland by BRIKOL Sp. z o.o. (first launch in 2020). This extremely efficient and energy-saving system is designed for the production of pellets from various types of raw materials, i.e. wood waste, sawdust and bran. It features a number of components with the best technical parameters, which enable the entire production process to be performed fully automatically. In this way, the problem of waste disposal in the carpentry and sawmill industry can be solved while at the same time making a profit. The BRIKOL pellet production line is fully complete and has the following components: – MB37 hammer mill – drum dryer – kiln – pellet mill – pellet sifter – sawdust conditioner – tank – flight conveyor (2 pcs) – screw conveyor – binder hopper – cooling device – control cabinet with display and computer  ...

Hull engine in replacement Scania DC13-071A without turbo,EGR cooler+hoses,PDE's,controlr installed in Kleemann crushing plants. Price only on request

Polymer plant incl. motors, tanks and agitators, etc.

Good day We offer you a used OCC sorting system consisting of a paper spike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper take-off belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, manufacturer Lubo Screening & Recycling Systems B.V. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes of the PaperSpike as well as pneumatic cylinders were replaced. All bearings and drive chains were replaced, and the engines and transmissions were checked. A viewing is possible by appointment. We assume no liability for the technical information or any errors. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH

TECHNICAL SPECIFICATIONS Manufacturer: DOPPSTADT Designation: Solids separator Design: Semi-mobile, hook lift system Type: GT 130 A Year of construction: 2019 Release medium: water Adjustable incline: up to max. 23° Drive type: Hydraulic Weight: 9,000 kg Transport dimensions (length/width/height): 7,346 x 2,500 x 2,921 mm SPECIFIC COMMENT - Machine for separating mixtures of materials made of buoyant and non-buoyant materials by means of water - Low operating hours - Robust and low-wear design of the machine - Compact transport dimensions as well as easy transport by hook lift truck

- Complete system - incl. conveyor belt width 2400 mm with NEW CONVEYOR BELT - Incl. discharge hood with separating parting - INCL. BLOWER FOR FOIL SORTING - incl. SOFTWARE UPDATE FROM PELLENC - incl. COMPLETE OVERHAUL IN OUR SPECIALIST WORKSHOP IN D-59329 WADERSLOH - incl. COMPLETE DOCUMENTATION - YEAR OF CONSTRUCTION 2015

TECHNICAL SPECIFICATIONS Manufacturer: BOREMA Umwelttechnik AG Description: Manual sorting system Version: with feed hopper, conveyor technology, overbelt magnet Year of construction: 2024 Material: KVA pre-sorted, combustible waste Feed size: approx. 0-500 mm Required capacity: approx. 5.0 t/h FACILITY CONSISTS OF: 01) Vibratory Conveyor SFLU Dimensions (LxWxH): 5,000 x 800 x 250 mm Hopper volume: approx. 5 cbm 02) Climbing Tape FB Conveyor belt length: 3,000 mm Conveyor belt width: 1,000 mm Inclination: approx. 20° Drive power: 3 kW Rubber Belt: Supergrip 03) Permanent overbelt magnetic separator IMP Z-120 Material: magnetic FE metals Drive power: 2.2 KW, 400 V, 50 Hz 04) Sliding belt conveyor FB, manual harvest Conveyor belt length: 6,500 mm Conveyor belt width: 1,000 mm Drive power: 3 kW Hand sorting area: Lining with wood 05) Swivel Sliding  ...

Cable shredder Manufacturer GEM Type TS 1000 Year of construction 05/2016 • CE certificate: TS 1000 • Slip No: PCCE 1036 • Pressure: 100 bar • 75 kW motor power • Weight: 10,200 KG • Rotation Number: 88/min • Rotor length: 1,000 mm • Rotor width: 450 mm • Hydraulic slider 1,400 mm • Rotor knife 50x50x30mm hardened DIN 2379 • Engine manufacturer Gama • Radiator manufacturer Yilmaz 87 revolutions / minutes • Electronics manufacturer Siemens and ABB PLC control panel • Hydraulic pneumatic sieve changing mechanics

Sorting/Cutting Table

Mobile sorting table Cycle Sort Type B BJ 2025

Pellenc Mistral + 2800 with Westeria acceleration belt and disc distributor (built in 2022) for optimal material distribution on the belt. The system is in good condition and up to date with the latest software.

PAPER CARTON SORTER good condition Available now! cheap to give away

2 units air classifier type Nihot - 2 x 2 pieces blower - 2 x 1 piece airlock cheap to show off

Light material separator Remav LA 1400