paal shredders used for sale

used heavy duty paper pulper Manufacturer: PAAL Type: PAL-1800 Year of Make: 1990 Main parts of the machine: 1 drive housing with rotor and externally mounted motor 1 slot 1 Electrical control Weight of the machine approx.: 9,000 kg Capacity up to approx.: 35,000 kg/h Main drive power: 75 kW Total connected load: 78 kW Rated current: 150 A Operating voltage: 400 V, 50 Hz Filling width approx.: 1,800 mm Filling opening approx.: 1,800 x 1,972 mm incl.: 1 set of vibration dampers Functioning: The compact and, above all, large-piece paper types to be shredded must be conveyed into the discharge chute in the correct dosage using a conveyor belt. The rotor tears the material into pressable material and hurls it into the ejection hopper, which is open at the bottom and conveniently located above the conveyor belt leading to the press.  ...

used heavy duty paper pulper Manufacturer: PAAL Type: PAL-1800 Year of Make: 1996 Main parts of the machine: 1 drive housing with rotor and externally mounted motor 1 slot 1 Electrical control Weight of the machine approx.: 9,000 kg Capacity up to approx.: 35,000 kg/h Main drive power: 75 kW Total connected load: 82 kW Rated current: 162 A Operating voltage: 400 V, 50 Hz Filling width approx.: 1,800 mm Filling opening approx.: 1,800 x 1,972 mm incl.: 1 set of vibration dampers Functioning: The compact and, above all, large-piece paper types to be shredded must be conveyed into the discharge chute in the correct dosage using a conveyor belt. The rotor tears the material into pressable material and hurls it into the ejection hopper, which is open at the bottom and conveniently located above the conveyor belt leading to the press. T ...

automatic baling press Manufacturer: PAAL Type: KONTI 275 F Built: 2007 Main parts of the press: 1 automatic duct press (without wire winding devices) 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force: 800 kN / 80 t at 300 bar Specific pressing force: 9.70 kg/cm2 Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,600mm Number of connecting wires: 4 pieces vertically Drive power: Main pump: 1 x 45 kW Pump delivery capacity: 1 x 380 l/min Throughput: up to approx. 280 m3/h under operating conditions Performance at: - 35 kg/m3 bulk weight: approx. 9.5 t/h - 60 kg/m3 bulk weight: approx. 16.5 t/h - 100 kg/m3 bulk weight: approx. 26.0 t/h Hydraulic oil tank volume: 2,100 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other equipment: Operator Panel MP 270 auto ...

automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t

automatic baler Manufacturer: PAAL Type: PACOMAT IS Year of construction: 1988 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Channel size: 700 x 700 mm Opening: 800 x 650 mm Drive power: 22 kW Throughput: 100 m³/h with additional manual hopper Wire flow in the pressing direction seen on the left side

used chain conveyor belt Manufacturer: PAAL Type: KEL 1000 Year of construction: 1997 specifications: Conveying width: approx. 1,000 mm Center distance:approx. 7,500 mm Band course: ascending over the entire length, Conveyor belt drive power: 3.0 kW Side bolster height: 500 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE

automatic baler Manufacturer: PAAL Type PACOMAT II S SO Year of construction: 1994 specifications: Pressing force: 50 t Specific pressing force: 7.14 kg/cm² Filling opening: 1,000 x 650 mm Channel format: 1,000 x 700 mm Drive power: 45 kW Throughput: approx. 170 m³/h automatic 4-fold horizontal binding

used box press Manufacturer: PAAL Type: HS 34 specifications: Filling box size: 1,000 x 700 x 2,200 mm (W x D x L) Filling opening: - 1st filling: 2,200 x 1,000 mm - 2nd filling: 1,200 x 1,000 mm Press pressure: approx. 18 t Drive power: 4 kW Lifting speed pre-pressing and retraction: 2.5 m/min. Lifting speed repressing: 1.25 m/min. Bale size: approx. 700 x 1,000 x 1,300 mm Bale weight: up to approx. 300 kg Weight of the machine: approx. 2000 kg Machine dimensions: 3,500 x 1950 x 1,450 mm (L x W x H)

automatic baler Manufacturer: PAAL Type: KONTI 275 C Year of construction 1996 specifications: Press force: 65 t Specific pressing force: 7.88 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 450 - 600 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 45 + 30 kW Throughput: 380 m³/h Pressing capacity: - approx. 13.0 t/h at department store (35 kg/m³ bulk density) - approx. 23.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 35.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 21.0 t Optionally with feeding belt according to photos

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of construction: 2008 specifications: Conveyor width: approx. 1,500 mm Wheelbase:approx. 9,625 mm Strip course: approx. 2,935 mm horizontally underfloor, then rising to a length of approx. 4,500 mm below 28°, sloping below 10° on the remaining length and conveying into the press Conveyor belt speed: 0.27 m/sec Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE as far as possible pre-assembled, consisting of: - Strip scaffolding in solidly welded section steel and sheet steel edge construction, - additional sliding guides underneath the belt support profiles in the horizontal and climbing sections to support heavy loads, - Conveyor belt (quality: EP 200/2 2:1) with 2 ...

Baler Paal Pacomat II with hopper, built in 1979 Specifications: Manufacturer: Paal Type: Pacomat II Year of Make: 1979 Drive power: 11 kW Pressing force: 27 t Channel cross-section: 700 x 1000 mm Filling opening: 1000 x 650 mm Flow rate: approx. 60/115 m³/h Bale size: 700 x 1000 mm Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: approx. 5200 kg Materials: paper, cardboard, foil Remarks: The machine is in working condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be happy to answer any questions you may have about the machine by phone from Monday to Thursday from 08.00 to 14.00 ...

automatic baler Manufacturer: PAAL Type: KONTI 600 F/k with cross-binding Year of construction 2008 Machine was only in operation for 4 years specifications: Press force: 145 t Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 2 x 75 kW Throughput capacity:approx. 510 m³/h Capacity at 35 kg/m³: 17.5 t/h Capacity at 60 kg/m³: 30.0 t/h Capacity at 100 kg/m³: 47.0 t/h Binding: 5-fold vertical Additional 4-fold automatic horizontal bonding Bale weight: approx. 800 - 1,250 kg depending on baled material and bale length Machine weight: up to approx. 42 t Attached pictures are only sample pictures!

used baler Manufacturer: PAAL Type: LIKON 110/150 Year of construction: May 2004 Specifications: Press weight up to: approx. 36 tons Press force at 275 bar: 150 t Operating pressure max. 320 bar Filling opening: approx. 2,000 x 1,020 mm Channel cross-section: 1,100 x 1,100 mm Drive power: 2 x 75 kW Flow rate: 425 m³/h Binding: 5-fold horizontal Total connected load: 176 kW Rated current: 340 A Pre-fuse (min.) 400 A Operating voltage: 3 x 400 VAC/50 Hz/N/PE Control voltage: 230 VAC / 24 VDC including: - Oil cooling - Low-pressure circuit - Free kicks - Key locking system Transport dimensions: Length: 13,803 mm Width: 2,500 mm Height: 3,164 mm without wire unwinding devices, without binding wire, without feed belt, without a personal protection system, without conveyor belt hopper and withou ...

automatic baler Manufacturer: PAAL Type: KONTI 700 G/S Year of construction 2010 specifications: Press force: 1940 kN/ 198 t at 300 bar Specific pressing force: 160 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 75 kW Throughput capacity (according to manufacturer's specifications): approx. 650 m³/h Capacity at 35 kg/m³: 22.5 t/h Capacity at 60 kg/m³: 36.5 t/h Capacity at 100 kg/m³: 55.5 t/h Binding: 5-fold vertical Bale weight: approx. 800 - 1,450 kg depending on baled material and bale length Machine weight: up to approx. 47 t

New hydraulic pump QX61-250/63-100R88 for PAAL channel baler. Can be used in systems with a 75kW motor.

Brand new gear pump, with internal gearing for PAAL Konti, Pacomat channel baling press. Can be used in systems with a motor of at least 22 kW

Dual hydraulic pump for PAAL, 45kW Used 2-piece hydraulic pump for PAAL channel baling press. Can be used in systems with a 45 kW motor

automatic baler Manafacture: PAAL Type: PACOMAT IS Year of construction: 1993 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Duct format: 700 x 700 mm Filling opening: 800 x 650 mm Drive power: 18.5 kW Throughput: 80 m³/h with additional manual feed hopper Wire passage seen in the direction of pressing on the left side

Used Triple Hydraulic Pump QX51-125/53-063/52-063R91 for PAAL channel baler. Can be used in systems with a 45 kW or 55 kW motor. Manufacturer partnumber: QX51-125/53-063/52-063R91

Baler Paal Konti 200 D, built in 2000, optionally with matching conveyor belt Paal KEM-1400 Technical data: Manufacturer: Paal Type Paal Konti 200 D Year of construction 2000 Hours: 28155 Pressing force 60 t Drive power 45 kW Total connection 60 kW Filling opening 1020 x 1400 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying throughput at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight 450 to 650 kg Transport dimensions approx. 10123 x 2152 x 2720 mm (LxWxH) Machine weight approx. 15,000 kg Materials: paper, cardboard, foil The press is in good condition and has been inspected and tested. You can find a video on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We a ...

automatic baler Manufacturer: PAAL Type: KONTI 700 G/S Year of construction 2010 Technical data: Press force: 1940 kN/ 198 t at 300 bar Specific pressing force: 160 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 75 kW Throughput capacity (according to manufacturer's specifications): approx. 650 m³/h Capacity at 35 kg/m³: 22.5 t/h Capacity at 60 kg/m³: 36.5 t/h Capacity at 100 kg/m³: 55.5 t/h Binding: 5-fold vertical Bale weight: approx. 800 - 1,450 kg depending on baled material and bale length Machine weight: up to approx. 47 t Optional: with Bollegraaf steel plate strip according to picture

Technical data Maximum pressure: 50 tons Year of Make: 1994 Pressing force: 7.14 kg/cm² Number of bindings: 3 horizontal Channel cross-section: 1000 x 700 mm Dimensions of the tailgate: 145 x 95 cm Bale weight: do 500 kg Weight: approx. 10 tons Power connection: 400 V/ 45 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the bale chamber for easy maintenance

LIKON 200C Horizontal Baler Machine Technical specifications: Engine power - 22 kW Year of production - 1994 With oil cooler Horizontal binding x 4 times Press force - 30 t Overall dimensions of the baler: 10000 x 2000 x 2750 mm Press weight: 10 t Loading opening dimensions: 1400 x 700 mm Bundle dimensions - 700 x 1100 x 1000-1200 mm, variable length With hydraulic oil No binding wire It worked in a printing shop without a conveyor belt, only with dry-shredded printing waste! Motorcycle hours - 62639 The baler is in good condition, ready for operation PRICE ON REQUEST! ----- Horizontal Baller Paal LIKON 200C Technische Daten: Motorleistung - 22 kW Produktionsjahr - 1994. Mit Ölkühler Horizontale Bindung x 4 Mal Presskraft - 30 t Gesamtabmessungen der Presse: 10000x2000x2750 mm Eigengewicht der ...

Specifications Maximum pressure: 50 tons Press force: 7.14 kg/cm² Duct cross-section: 1000 x 700 mm Bale weight: do 500 kg Power supply: 400 V/ 30 kW Number of ties: 3 horizontal Dimensions of the tailgate: 1250 x 950 mm Weight: about 10 tons Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the duct. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the press chamber for easy maintenance

automatic baler Manufacturer: PAAL Type: KONTI 600 G/S/K with cross-binding Year of construction 2012 Operating hours: approx. 44,700 hours specifications: Press force: 1,546 kN System pressure: 315 bar Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 55 kW Pump capacity: 3 x 420 Ltr. Oil tank volume: 3,100 ltr. Throughput:approx. 780 m³/h Capacity at idle: approx. 1,220 m³/h Capacity at 35 kg/m³: approx. 26.5 t/h Output at 60 kg/m³: approx. 44.0 t/h Output at 100 kg/m³: approx. 69.0 t/h Control: Siemens S7 Setting: 5-fold vertical Additional 4-fold automatic horizontal tying Bale weight: approx. 800 - 1,250 kg depending on the material to be pressed and bale length Machine weight: up to approx. 42 t Includes a top pressure plate slot cover Printing plate was renewe ...

Specifications Maximum pressure: 65 tons Pressing force: 84 tons/m² Duct cross-section: 1000 x 750 mm Bale weight: do 550 kg Power supply: 400 V/ 45 kW Year of construction: 2011 Number of ties: 4 vertical Dimensions of the tailgate: 1400 x 920 mm Weight: approx. 13 tones Bale tying: automatic

automatic baler Manufacturer: PAAL Type: KONTI 200 C Year of construction: 1993 specifications: Press force: 50 t Channel format: 750 x 1,100 mm Specific pressing force: 6.06 kg/cm² Bale weight: 425 - 550 kg, depending on material and bale length Infill opening: 1,400 x 1,020 mm Drive power: 45 kW Throughput: 200 m³/h Pressing capacity: - approx. 7.35 t/h layered at department store (35 kg/m³ bulk density) - approx. 12.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 20.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 17 t

automatic baler Manufacturer: PAAL Type: KONTI 125 Year of Make: 1988 Operating hours: approx. 23660 specifications: Press force: 40 t Specific pressing force: 5.7 kg/cm² Channel format: 700 x 1,000 mm Binding: 3-fold vertical Bale weight: 375 - 450 kg, depending on material and bale length Filling opening: 1,400 x 920 mm Machine weight: approx. 10 t Drive power: 22 kW Throughput: approx. 115 m³/h Pressing capacity: approx. 4.00 t/h at department store (35 kg/m³ bulk weight) approx. 6.75 t/h for mixed paper (60 kg/m³ bulk weight) approx. 10.0 t/h for collected goods (100 kg/m³ bulk weight)

used baler Manufacturer: PAAL Type: PACOMAT I-35 Year of Make: 2008 specifications: Press force: 35 t Specific pressing force: 7.14 kg/cm² Drive power: 22 kW Throughput: up to approx. 85 m³/h under operating conditions Channel format: 700 x 700 mm Filling opening: 800 x 620 mm Machine weight: up to approx. 6.5 t (depending on equipment)

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of Make: 2009 specifications: Conveying width: approx. 1,500 mm Center distance: approx. 9,625 mm Belt course: approx. 3,000 mm horizontally running underfloor, then rising below 30° over a length of approx. 5,875 mm, sloping below 20° on the remaining length and conveying into the press Conveyor belt drive power: 3.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt with 20 mm high T-studs on the sides to seal the belt stringers,  ...

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1750 Year of Make: 2004 specifications: Conveying width: approx. 1,500 mm Belt run: approx. 4,300 mm horizontally underfloor, then increasing over a length of approx. 6,300 mm, Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 1,027 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt with 20 mm high T-studs on the sides to seal the belt stringers, - Belt routing in a neutral zone to avoid stretching tensions, - Chain type M-80 with case-hardened bushings, bolts and roller ...

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of Make: 2005 specifications: Conveying width: approx. 1,500 mm Belt run: approx. 3,100 mm horizontally underfloor, then rising below 28° over a length of approx. 6,000 mm, Descending below 10° on the remaining length and conveying into the press Conveyor belt speed: 0.27 m/sec. Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt (quality: EP 200/2 2:1) with lateral 20 mm high T-studs for sealing the be ...

Specifications Maximum pressure: 85 tons Year of Make: 1994 Pressing force: 103 tons/m² Number of ties: 4 - vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1750 mm Bale weight: 500-650 kg Weight: 26 tons Power connection: 400 V/ 55 kW Bale tying: automatic

Fully automatic baler Manufacturer: PAAL Type KONTI 275 D Year of Make: 2000 specifications: Press force: 75 t Drive power: 1 x 45 kW Total connected load: kW __ / 170 A Throughput under operating conditions: 280 m³/h Filling opening: 1,020 x 1,550 mm Bale size:750 x 1,100 mm Binding: 4-fold vertical incl. front printing plate slot cover Machine weight: approx. 25 t Bale weights: up to approx. 600 kg Including: - Free kicks - Large digit display

Specifications Maximum pressure: 75 tons Year of Make: 1999 Press force: 90.9 t/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1550 mm Bale weight: 500-750 kg Weight: approx. 25 tons Power connection: 400 V Bale tying: automatic Motor: 75 kW (possibility of switching to 55 or 45 kW) Press capacity at idle: max 750 m³ / hour Press capacity under operating conditions: max 350 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 12 tons/hour Theoretical throughput to density 60 kg/m3: approx. 21 tons/hour Theoretical throughput to density 100 kg/m3: approx. 33 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Cho ...

used baler Herateller: PAAL Type: PACOMAT II Year of Make: 1995 Specifications: Pressing force: 27 t Drive power: 18.5 kW Total connected load: 25 kW Throughput: 115 m³/h Filling opening: 1,000 x 650 mm Channel format: 1,000 x 700 mm (H x W)

automatic baler Manufacturer: PAAL Type: Pacomat IS Year of Make: 1990 specifications: Pressing force: 27 t Specific pressing force: 5.51 kg/cm² Total connected load: 23 kW Rated current: 46 A Main drive power: 18.5 kW Capacity: 80 m³/h Control: Siemens S5 100 U Bale size: 700 x 700 Filling opening: 800 x 600 mm

automatic baler Manufacturer: PAAL Type: KONTI 125 SO Year of Make: 1990 specifications: Press force: 40 t Specific pressing force: 5.7 kg/cm² Channel format: 700 x 1,000 mm Bale weight: 375 - 450 kg, depending on material and bale length Filling opening: 1,400 x 920 mm Machine weight: approx. 10 t Drive power: 22 kW Throughput: 115 m³/h Pressing capacity: approx. 4.00 t/h at department store (35 kg/m³ bulk weight) approx. 6.75 t/h for mixed paper (60 kg/m³ bulk weight) approx. 10.0 t/h for collected goods (100 kg/m³ bulk weight)

automatic baler Manufacturer: PAAL Type: KONTI 600 F/k with cross-binding Year of construction 2008 only 4 years in operation specifications: Press force: 145 t Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 2 x 75 kW Throughput capacity:approx. 510 m³/h Capacity at 35 kg/m³: 17.5 t/h Capacity at 60 kg/m³: 30.0 t/h Capacity at 100 kg/m³: 47.0 t/h Binding: 5-fold vertical Additional 4-fold automatic horizontal bonding Bale weight: approx. 800 - 1,250 kg depending on baled material and bale length Machine weight: up to approx. 39 t

Technical data: Maximum pressure: 60 tons Year of Make: 1999 Press force: 72.7 t/cm² Number of Bindings: 4 Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1400 mm Bale weight: 450-650 kg Weight: approx. 20 tons Power connection: 400 V/ 45 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the bale chamber for easy maintenance If you have any further questions about this or similar channel balers, please do not hesitate to contact us by email or phone!

Maximum pressure: 50 tons Year of Make: 2006 Pressing force: 65 tons/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1000 mm Dimensions of the tailgate: 920 x 1400 mm Bale weight: 350-500 kg Weight: approx. 13 tons Power connection: 400 V/ 22 kW Bale tying: automatic

Manufacturer: Paal Model : Konti 275 G Year of Manufacture : 2010 Find more here - / Contact us at -

Baler Paal Konti 325 D/SO, built in 1999 Technical data: Manufacturer: Paal Type Paal Konti 325 D/SO Built in 1999 Hours: 50702 Press force 94 t Drive power: 2 x 45 kW Total connection 104 kW Filling opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight 525 to 800 kg Transport dimensions approx. 12352 x 2340 x 2800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: paper, cardboard, light waste, plastic waste Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex wor ...

Available from 15.05.2026 Baler Paal Konti 325 G, built in 2013 Technical data: Manufacturer: Paal Type Konti 325 G Year of construction 2013 Operating hours 11,723 (as of 10.02.26) Press force 100 t Drive power 2 x 55 kW Filling opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable Setting 5-fold automatic Throughput at 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: paper, cardboard, light waste, plastic waste Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sal ...

Manufacturer: PAAL Model: KONTI 700 G/S/K Year of Manufacture: 2011 Type of Machine :Baling Press Key Features - Cross-lacing system (optionally switchable) - Oil cooling system - CE marked Find more here - / Contact us at -

BALLER PAAL KONTI 425 C Technical specifications: Manufacturer: Paal Type: Konti 425C Year of manufacture: 1995 Klsdm Ajx Dk Ttsty Atel Feed opening: 102 x 175 cm Drive power: 170 kW Caedm Atyexx Su Uo Atsa Compression force: 85 t Settings: Horizontal, fully automatic Roll weight: 500-650 kg Press weight: 25 t PRICE ON REQUEST! ----- BALLER PAAL KONTI 425 C Technische Daten: Hersteller: Paal Typ: Konti 425C Herstellungsjahr: 1995 Bwsbjycfuqsmcbw Nveh Einfüllöffnung: 102 x 175 cm Antriebsleistung: 170 kW Kompressionskraft: 85 t Einstellungen: Horizontal, Vollautomatisch Rollengewicht: 500-650 kg Pressgewicht: 25 t PREIS BEI ANFRAGE!

For sale: Paal Konti 425 D horizontal baler Technical specifications: Manufacturer: Paal Type: Konti 425D Year of manufacture: 2002 Feed opening: 102 x 200 cm Drive power: 2 x 45, 2 x 75 kW Kledex Dlanem Aty Atsl Pressing force: 115 t Settings: Horizontal, fully automatic Roll weight: 550-850 kg Pressing weight: 36 t PRICE ON REQUEST! ----- Verkaufen horizontal Baller Paal Konti 425 D Technische Daten: Hersteller: Paal Typ: Konti 425D Baujahr: 2002 Einfüllöffnung: 102 x 200 cm Antriebsleistung: 2 x 45, 2 x 75 kW Druckkraft: 115 t Einstellungen: Horizontal, Vollautomatisch Rollengewicht: 550-850 kg Pressgewicht: 36 t PREIS BEI ANFRAGE!

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

Ready exhibition machine built in 2016 Mercodor ZM 44 Cutting Chamber 500 x 380 mm knife 14 3 mm hook drive 7,5 kw

Twin Shaft shredder mod. ITS850x550E- 22 kW. Heavy duty construction. Shredding chamber dimensions 8500x550 mm with n°2 counter-rotating hexagonal shafts fitted with n°28 blades with a thickness of 30 mm, 1 hook double spaced to 60mm. Including n°1 main gearbox with straight spur gears for fast and slow shaft. Driven by n°1 x 22 kW motor The shredder is supplied complete with supporting stand, feeding hopper. The electric control panel of this shredder will be fitted with a Siemens PLC to control the working logic of the shredder including the automatic shafts reversal system in overloading conditions, a display will show the working parameters and operating conditions. The total weight of the shredder is around 3.000 Kg.

Ready exhibition machine MERCODOR ZM 52 Year 2015 Mercodor Shredder ZM 52 Cutting area 650 x 540 mm or 1050 x 540 mm with 22 kw

the two shaft shredder with knives 14 mm 3 hooks and 7.5 kw

This is a second hand machine with 22 kw. Knife 24 3 mm hook complete with Hopper, base and switchgear.

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Originally, the recycling of fluo ...

n°1 Cutting chamber: 300x330mm. n°2 hexagonal shafts. n°33 counter-rotating blades, blade Thickness 10 mm or n°10 counter-rotating blades, blade thickness 30 mm n°1 reducer with electric motor 7, 5kW, 400V, 50Hz, Shafts rotation speed 18/20 rpm. Total weight of the Shredder 700 Kg.

4 shaft shredder for crushing of thick-walled pipes. Supply via feeding shaft (not in scope of delivery, can be manufactured alternatively) Manufacturer Vecoplan Drive: Rotorshaft 1: 37 kW Rotorshaft 2-4: 30 kW (each)

Two-shaft shredder KS 1000/2 INDIVIDUAL - ADAPTABLE - ON YOUR RIGHTS Product information The 2-wave shredder KS 1000/2 is a powerful shredder that has a completely mechanically machined, solid grinding chamber. It is composed of 4 parts which are completely plugged into each other and screwed together, this gives an enormous stability and is very maintenance-friendly. The machine is powered by 2 high-performance electric motors that drive hexwaves running against each other via high-quality and robust planetary gearboxes 2. The hexagonal shafts can be equipped with individually made cutting discs of different thicknesses. The grinding chamber of the KS 1000/2 is double protected by wear plates and wear rings and is therefore completely armoured against wear. specifications: -Cutting room: 1000×600 -Drive: 2x15kW -Speed per shaft: 16.5 rpm -Advantage: Constant torq ...

Used shredders with gearbox not overhauled and also not repaired. Spare parts such as shafts, scrapers, knives, etc. also available as good as new.

Shredder, rotor shears, plastic shredder, garbage shredder, two-shaft shredder, two-shaft shredder, used shredder 13 knives each approx. 300 x 36 mm each shaft is driven separately Insertion approx. 1450 x 1000 mm Platform height: approx. 1000 mm Drive 11 kW and 5.5 kW, 380 V Dimensions: approx. 3500 x 2000 x 3500 mm For crushing plastic, paper, cardboard, files, canisters, cans, floor coverings and the like.

Construction debris / concrete shafts, suitable for Arjes Impactor 250 with quick-release cassette and dust-tight bearing lid - ready for installation - incl. transport frame ! We are happy to take care of the transport for you and build a professional !

-PREPARATION AND PRODUCTION OF PRODUCTS -TRADE AND SALE OF PRODUCTS (NEW AND USED) -THE USE OF A COMPANY (JE AFTER AVAILABILITY)

STYRO-CUT 350 Shredder for Polystyrene specifications Motor power: 5.5 kW / 380 V Throughput: approx. 4 m³ / hour (depending on material and sieve) Speed: 2,900/min. Dimensions: W x D x H: 640 mm x 1,500 mm x 2,400 mm Volume reduction: 70 – 80 % Weight: approx. 170 kg Insertion opening: Ø 280 mm Height insertion: 1,600 mm Granulate size: up to 6 mm STYRO-CUT 350 is a device for shredding (granulating) the polystyrene (EPS). The packaging residues, sections are entered into the insertion funnel and the material is automatically sucked in by the device. The material is shredded by the device in a single step, granulated and filled into bags or transported to the silo. The device reduces the volume by 70-80% and thus also reduces the cost of storage and transport. Un contaminated ESP granules can be reused in the production of new products from EPS. The produced granu ...

Styrofoam shredder, shredder for polystyrene Styro-Cut 500 Technical specifications of the Styro-Cut 500 Dimensions (DxWxH): 920 x 1130 x 1640 mm Electric motor: 11 kW/2900 min – 1, 380 V Insertion opening: Ø 420 mm Weight: approx. 300 kg Throughput capacity: up to approx. 25 m3/h depending on sieve size and material Granule size: with standard sieve 9 mm. Production of granules up to 6 mm possible Styro-Cut 500 as an independent unit for manual shredding of the polystyrene Styro-Cut 500 can be used as part of a production line for crushing polystyrene. DS-50 is used as a coarse shredder, which is equipped with the help of a conveyor belt. The material is then conveyed to the Syro-Cut 500 shredder and finely shredded. Uses: – Companies that recycle the waste styrofoam – Construction industry that uses polystyrene as heat and sound insulation – Shops that  ...

XXL Large tire detwulster for OTR tires up to 1600 mm inner diameter! Mobile on rolling frame. Transport with unrolling tipper. Weight approx. 9500 kg, length approx. 6500 mm. Very good condition!

Two-shaft shredder Drive 37.50 kW

Inlet: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm

Polystyrene shredders for EPS waste and other materials made of polystyrene – EPS specifications: Electric motor: 5.5 Kw/380 V Speed: 120 rpm. Weight: approx. 1800 kg Dimensions: 2030x1100x1550 mm Throughput: up to approx. 25 m³/hour Insertion opening: 1500×600 mm Granule size: up to approx. 50 mm Throughput depends on the material and size of the sieve. PLANTS and SYSTEMS for SHREDDING EPS WASTE (no longer usable polystyrene expands, polystyrene) – STYRO-CUT® EPS is a hard plastic material. It is mass-reduced and has good mechanical properties. In the EPS block of 1 m³ volume, there is about 98% air in 3-6 million closed cells, which is why EPS works as a remarkable heat insulator. The plant was developed for the processing of smaller quantities of polystyrene, as well as systems for the mass processing of EPS waste. Such granules can be used: in n ...

Crushers

Styrofoam shredder MAXI XL 1400 x 560mm MAXI 1400 x 600mm JUMBO 1800 x 800mm Insertion opening: L x W Polystyrene shredder MAXI XL: 1400mm x 560mm Polystyrene shredder MAXI: 1400mm x 600mm Polystyrene shredder JUMBO : 800mm x 800mm Dimensions: L x W x H (dimensions without blower) Polystyrene shredder MAXI XL: 2.4m x 0.9m x 1.6m Polystyrene shredder MAXI: 1.9m x 0.8m x 1.8m Polystyrene shredder JUMBO: 2.4m x 1.1m x 1.8m Motor power/connection/power conveying fan: Pre-shredder / conveyor blower Polystyrene shredder MAXI XL: 5.5 kW | Blower 2.2 kW Polystyrene shredder MAXI: 6.2 kW (with built-in screw under the pre-crusher) | Blower 2.2 kW Polystyrene shredder JUMBO 11.2 kW (with built-in screw under the pre-crusher) Conveyor blower 5.5 kW Throughput (EPS) Polystyrene shredder MAXI XL: 8-10 m3/h Polystyrene shredder MAXI: 25-30 m3/h Styrofoam  ...

Edge strip shredder for edge trimming plastic films.

Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without solid stuttering materials. Application: Crushing of industrial and commercial materials, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and recyclable recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2x 160 kW (Schorch motors) Sieve perforation: Sieving 148 mm Control cabinet: complete with ( FUe -P-Drive) Opening: 3190 x 1750 mm Single volume: approx. 8 m3 Rotor length: 3190 mm Rotor flight circle: 745 mm Rotor speed: 50Hz : 58 rpm Number of rotor blades: 36 pieces Knife dimension, pointed knife: 145x 145 x 47 mm Geggenmesser unten: 9 pieces Scraper comb above: 9 pieces Hydraulic feed: 11 kW Weight: approx. 38 t Dimensions LxWxH mm: 6250 x 3260 x 3090(H=4900 m ...

Headquarters. Edge stiffener extraction

The MR 40-80 is a powerful single-shaft shredder for many tasks, such as the pre-shredding of cables, the crushing of electronic waste, used plastics, wood, etc. Unlike other single-shaft machines, IRS's shredder has two instead of one series of stator knives for better product quality and higher hourly output. The optimized arrangement of the rotor blades also reduces energy consumption. The horizontally acting hydraulic pusher has replaceable wear strips and regulates the contact pressure on the rotor. In addition, there are interchangeable screens for special tasks from 10 mm hole diameter. On request, the shredder can be optimized for cooling the rotor shaft, with wear protection armor, hydraulic clutch, remote services and other options for the respective application. Specifications: Number of knives: 35 + 2 (rotor + stator) Rotor speed: 85 rpm Rotor Ø, length: 400 mm, 80 ...

Specifications Cutting width: 5.8 x 50 mm Year of construction: 2003 Productivity: approx. 120 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s the security level: 3 Power supply: 400 V/4 kW

Cutting width: 5.8 mm Year of construction: 1993 Productivity: approx. 100 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 354 mm/s the safety standard DIN 66399: P2 Power supply: 400 V / 4 kW Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

The shredder breaks large bulky parts made of polystyrene and EPS and similar substances with a maximum raw density of 30kg/m³ into small pieces. The shredder reduces the volume by about 65%. Thus, machine is ideally suited for use in industrial and craft companies as well as for the wholesale and retail trade with packaging material made of Styrofoam. Throughput: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Screen 50 mm: approx. 23 m³/h Depending on the sieve set, a volume reduction of 3 : 1 takes place just by shredding your polystyrene residues. Custom-made products are available on request. VAT will be shown separately on the invoice. Shipping Germany-wide included, islands with surcharge. If you have any questions, please do not hesitate to contact us.

Specifications Cutting width: 3.8 x 50 mm Year of construction: 1997 Power supply: 400 V/ 4 kW Price: on request the safety step: DIN 66399 O-2/P-3/T-3/E-2/

Specifications Industrial shredders IDEAL 4104 Shredder Cutting width: 6 mm Power supply: 400 V/ 4 kW the safety step P2 DIN66399-1 Year of construction: 1993 Productivity: ok. 70 sheets (DIN A4, 70g/m²) Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

DESCRIPTION ITS twin-shaft shredders with low speed and high torque designed to guarantee high performance and maximum reliability in the shredding of tough or bulky materials. Their solid and sturdy construction surpasses any other shredder on the market. As previously said: Given the large size of the grinding chamber and the solid construction, they are particularly suitable for grinding bulky and tough products such as wooden pallets, cardboard cores, metal scraps of various kinds and sizes, stacks of paper / cardboard sheets and many other materials that are usually difficult to grind. APPLICATIONS Large rolled up carpet Cardboard cores Pile of cardboard sheets Metal scraps WORKING PRINCIPLE The material is fed through a loading hopper placed above the grinding chamber which contains two rotating hexagonal shafts, equipped with circular blades of prede-fined thickness w ...

Specifications Cutting width: 12mm, 9mm, 6mm, 3mm Year of construction: 1988-1989 Productivity: approx. 70 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 200 mm/s the security level: P1 - P2 Power supply: 380 V/2.2 kW Machine is fully functional, after technical inspection We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

ORDER NO. 7026 TECHNICAL SPECIFICATIONS - inlet width 740mm - inlet height 300mm - shaft width 780mm - shaft diameter 1000mm - knife length 780mm - number of knives 2pcs - sieve dimensions 55x55mm - 4 toothed pulling shafts from the bottom - lower shaft motor 5,5kW - 3 toothed pulling shafts from above - upper shaft motor 5,5kW - belt feeder - feed belt length 4300mm - feed belt width 600mm - belt feed motor 2,2kW - main engine 90kW - reverse gear, - autorewers - overall dimensions of the machine length / width / height 4600x2350x1700mm - overall dimensions of the feeder length / width / height 4550x980x970mm - total weight about 11000kg – German production, – used chipper, very good condition Net price: 295900 PLN Net price: 66494 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

Specifications Cutting width: 3.8×48 mm Year of construction: 1993 Productivity: approx. 40 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: - the safety step: P3 Power supply: 400 V / 2.2 kW We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

Specifications Shredder Cutting width: 5.8 x 40 mm Year of construction: 1992 Power supply: 400 V / 7.5 kW the safety level P4 DIN 66399-1 F2 DIN 66399-1 pts. 5.2 Baler Maximum pressure: 9 tons Year of construction: 1992 Pressing force: 36 tons/m² Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power supply: 400 V/ 3.5 kW Bale binding: manual

Builder: GREEN TECHNIK Model: BS 750 PTO Engine: 66 kW (90 HP) Data: L. 5.700 mm x W. 1.920 mm x H. 2.900 mm Year: 2003 Hourly Production: 25 m³/h Shredding System: 64 HAMMER