falken grinding machines used for sale

width of the strips: 150 mm band length: 2280 mm band speed: 22 m/sec table-size: 700 x 350 mm roll diameter: 140 / 80 mm motor speeds:: 2880 1/min range L-W-H: 1300 x 800 x 1500 mm total power requirement: 3,0 kW weight of the machine ca.: 250 kg Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized tape oscillation approx. 10mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 6.5 mm pre-bending: 4.5 mm diameter of upper rolls: 150 mm side roll diameter: 130 mm diameter of lower rolls: 150 mm distance: max. OW zu UW 20,0 mm total power requirement: 2.2 + 1.5 kW weight of the machine ca.: 2370 kg. range L-W-H: 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use () Special price on request Equipment: - electro-hydraulic 4-roller round bending machine with driven top roller + bottom roller stable welded construction - Area of application: light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) - conical bending device - 3x axis digital display for precise roller  ...

pressure: 40.0 t stroke: 285 mm flat steel: 250 x 24 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 660 x 1250 mm total power requirement: 4.0 kW motor: 400 Volt 50 Hz oil volume: 40.0 l weight: 800 kg range L-W-H: 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 2.0 mm roll length: 1070 mm roll diam. toproll: 75.0 mm engine output: 1.5 kW weight: 325 kg range L-W-H: 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80.0 t stroke: 250 mm table surface area: 1040 x 260 mm column travel between the guideways: 1040 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 5.5 kW weight of the machine ca.: 835 kg. dimensions of the machine ca.: 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on t ...

plate thickness: 2,0 mm tube diameter: 60,0 mm motor: 400 Volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mm ST Shaft length: 140 mm roll diameter: 62.0 mm throat: 100 mm roll speed: 16.0 + 32.0 U/min engine output: 0.75 kW weight: 135 kg range L-W-H: 900 x 450 x 1350 mm Display machine - like new Never been used () Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2.5 mm ST shaft length: 250 mm roll diameter: 96.0 mm throat: 160 mm roll speed: 6.0 + 13.0 U/min. total power requirement: 1.5 kW weight: 350 kg range L-W-H: 1400 x 550 x 1120 mm Display machine - like new Never been used () Special price upon request Features: - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2x bending speeds - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward and reverse rotation - Machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mm ST shaft length: 140 mm roll diameter: 62.0 mm throat: 100 mm total power requirement: manuell kW weight of the machine ca.: 50.0 kg dimensions of the machine ca.: 560 x 220 x 500 mm Display machine - like new Never been used () Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 15.000 kg height: 790 - 1350 mm width: 1200 mm weight: 65.0 kg Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 60 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2280 mm revolutions per minute: 2880 U/min roll diameter: 140 / 80 mm table-size: 700 x 350 mm engine output: 3.0 kW weight: 250 kg range L-W-H: 1300 x 800 x 1500 mm - Machinevideo - https://www.youtube.com/watch?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 50 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 1400 / 2800 U/min tube diameter: 40 - 140 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 360 kg. Exhibition machine - like NEW not yet in use () New price approx. 6.500 euros Special price on request - Machine video - identical machine - https://www.youtube.com/watch?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for grinding pipe and profile ends Equipment: - robust electro-motor pipe profile grinding machine - enables notches up to an angle of 50° - large-dimensioned surface grinding surface with protective cover - 2x belt speeds - control panel, front left - including emergency stop button - grinding belt can be replaced quickly and easily - vice movement to the right - left, forwards & backwards possible - side grinding dust collection container - horizontal  ...

0: 2.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 10.0 - 60.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 64.0 mm CU/Alu wall strength: 4.0 mm revolutions per minute: 1.25 - 2.50 U/min bar material - diameter: 35.0 mm voltage: 400 Volt Control: ISITAN NC total power requirement: 2.0 kW weight: 140 kg range L-W-H: 380 x 900 x 600 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2 Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Equipment: - ISITAN NC digital control unit Control panel = touchscreen 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included Additional  ...

tube diameter: 10.0 - 42.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 54.0 mm CU/Alu wall strength: 2.0 mm bar material - diameter: 30.0 mm revolutions per minute: 1.30 U/min voltage: 400 Volt total power requirement: 1.5 kW weight: 110 kg range L-W-H: 400 x 450 x 570 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1 1/4 Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included Additional segments available upon request for an additional charge ERCOLINA tool holder The data for this ad was created with ModulMWS  ...

sheet width: 2020 mm plate thickness: 2.0 mm distance between columns: 2100 mm angle adjustable from - to: 130 Grad total power requirement: manuell weight of the machine ca.: 1850 kg. range L-W-H: 3100 x 725 x 1350 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - heavy/manual swivel bending machine, with counterweight - long service life thanks to robust welded steel construction - universally applicable for metalworking shops and craft businesses - quick and easy bending process using a bow handle - all bearings and guides in a stable design - easy adjustment of the upper beam for efficient work - manual adjustment of the lower beam - manually adjustable angle fixed stop with analogue degree display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting capacity: 2.0 mm throat: 700 / 280 mm round blank diameter max.: 1000 mm round blank diameter min.: 120 mm speed: 7.0 m/min total power requirement: 1.10 kW weight of the machine ca.: 360 kg range L-W-H: 1400 x 400 x 1150 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven circular shears with large projection - with hardened blades - machine base - manual setting of the desired round diameter - manual material clamping - electric motor brake - 1x freely movable foot switch including emergency stop button The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1320 mm plate thickness: 2.5 mm ST thickness at Niro-steel: 1.2 mm blade length: 1350 mm no. of strokes: 34 Hub/min back stop - adjustable: max. 825 mm cutting angle: 1.5 ° work height max.: 810 mm Control: konv. engine output: 3.0 kW weight: 1100 kg range L-W-H: 1950 x 1450 (2000) x 1200 mm Exhibition machine - like new Never been used () Special price upon request Features: - Robust electro-mechanical sheet metal shear - Heavy-duty / robust drive motor - Manual backgauge, including analog position indicator Adjustment range max. 825 mm - Manual cutting gap adjustment - 2x table side stops including mm scale - 1x front stop bar - manually adjustable - 2x front support arms - Grip recess in the front work table - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating panel - front right - Rear safety device - Rear sheet chute - Connec ...

pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 11.0 kW weight of the machine ca.: 1870 kg. range L-W-H: 2200 x 1300 x 2300 mm Exhibition machine from 2021 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 ...

sheet width: 1250 mm plate thickness: 1.5 mm roll length: 1270 mm roll diam. toproll: 75.0 mm engine output: 1.5 kW weight: 400 kg range L-W-H: 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 16.0 - 90.0 mm width of the strips: 100 mm band length: 1250 mm grinding band dimension: 100 x 1250 mm total power requirement: 2.2 kW weight of the machine ca.: 180 kg. range L-W-H: 1200 x 600 x 1150 mm Exhibition machine - like NEW not yet in use () New price approx. 4.500 euros Special price on request The PN 17/90 is a grinding machine for grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery incl. storage area - rear of the machine - simple manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy transport The  ...

: 1550 mm : 2,0 mm : 1,5 mm roll diameter: oben 90 mm : 560 kg : 2580 x 700 x 1250 mm mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 50.0 mm band length: 940 mm band speed: 3.0 - 22 m/min turning speeds: 1450 U/min tube diameter: 16.0 - 114 mm radius: 180 ° total power requirement: 4.75 kW weight of the machine ca.: 265 kg range L-W-H: 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180 (angle). - Manual work possible without feed - CE mark / declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 11.0 kW weight of the machine ca.: 2070 kg. range L-W-H: 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery spee ...

pressure: 30.0 t stroke: 200 mm table surface area: 775 x 190 mm column travel between the guideways: 775 mm ajustment speed: 7.5 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 3.0 kW weight of the machine ca.: 400 kg. dimensions of the machine ca.: 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side -  ...

pressure: 60.0 t stroke: 250 mm table surface area: 1040 x 370 (315) mm column travel between the guideways: 1040 mm ajustment speed: 8.0 mm/sec working feed: 4.0 mm/sec return speed: 10.0 mm/sec engine output: 4.0 kW weight of the machine ca.: 800 kg. dimensions of the machine ca.: 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the s ...

pressure: 100 t stroke: 300 mm table surface area: 1070 x 315 mm column travel between the guideways: 1070 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec oil volume: 90.0 l engine output: 5.5 kW weight of the machine ca.: 1870 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hy ...

pressure: 100 t stroke: 300 mm table surface area: 1070 x 260 mm column travel between the guideways: 1070 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec oil volume: 90.0 l engine output: 5.5 kW weight of the machine ca.: 1500 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand  ...

pressure: 80.0 t stroke: 285 mm flat steel: 300 x 25 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 750 x 1425 mm total power requirement: 10.0 kW motor: 400 Volt 50 Hz oil volume: 120 l weight: 1700 kg range L-W-H: 1500 x 750 x 1800 mm Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Programming of 1x bending end point & 1x return point possible - 1x tool set (1x bending punch / 1x 1V die) Bending punch .. degree: 60° / bending radius: 5.0 mm Die .. degree: 85° / V opening: 100.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material stop - Freely movable double foot switch - Machine can be moved with a pallet truck/forklift - Operating instructions The data ...

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

Machine overhaul , Repairs , On-site maintenance at the user's site , Spare parts supply , We specialize in the overhaul and repair of Kellenberger and Strausak universal grinding machines. We have the production and license rights of the company Strausak for the Type 57 U / W the resulting Special machines 82 S , multi-spindle fine milling machines, as well as CNC machines built from type 57 U / W We manufacture special machines especially for the ceramics and carbide industry.

In 2001 we acquired the license and production rights of Strausak. These rights include the entire 57 U / W conventional series as well as the CNC machines of the type U / W CNC in the tool grinding range 3 G / 4 G / 5 G as well as in the universal cylindrical grinding area, the 2 axes / 3 axes and 4 axes CNC machine and special machines 81 CNC. We have an extensive stock of spare parts. Our specialization is the general overhaul of these machines, as well as the new production of the above-mentioned machine types and the production of special machines.

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

ELB Perfect BD 15 PLC surface grinding machine, grinding area 1500 x 550 mm, grinding wheel 400 x 100 mm, electric perm magnetic clamping plate 1500 x 550 mm, automatic dresser with compensation, paper belt filter, the machine is overhauled, grinding spindle rebeared, guideways are scraped, meets the tolerance of a new machine. We are happy to take over the installation / training on site, as well as the subsequent service

Magnetic table 455 x 170 mm Digital Water tank Pulling device Wet grinding device

Precision Surface and Profile Grinding Machine FS1570 SL Grinding area: 1500 x 700 x 650 mm Grinding spindle motor: 18 KW Table drive: hydraulic Transverse drive: electromechanical Paintwork: RAL 6011 – reseda green Equipment: •Central lubrication • Wet grinding device • Fine adjustment knob on the transverse path handwheel • Dressing Diamond • Electro magnetic clamping plate 1500 x 750 mm • Magnetic plate adhesive force control Accessories: • Vertical automatic type SL with "LCD" flat screen and membrane keypad • Electric Straight Dresser • Stepless change of speed • Universal paper filter machine • Machine light • Column elevation by 200 mm • Precision balancing scale • 2 new grinding wheels Machine has been overhauled in 08/2018 "Invoice is available" Here's what was done: •Timing belt •Storage • Ball screw •  ...

ELB Perfect BD 10 750 PLC, Year of construction 2008 Control Siemens STC Grinding area 1000 x 750 mm Grinding wheel 400 x 100 mm Grinding spindle 10 KW Electro Perm Magnetic Clamping Plate 1000 x 750 mm Automatic straight-dressing device with compensation Coolant system with paper belt filter Machine is immediately ready for use CE compliant Installation / on-site training included

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

Favretto 500, Rotary table surface grinding machine, horizontal spindle, dia 500mm, electric elettrico with DRO

Cylindrincal grinding machine, KNUTH RSM 750, interna/external, DRO, This machine can be inspected under power in our warehouse., Mimu Machine Tools, Gussago BS Italy

CNC cylindrical grinding machine, STUDER S31 CNC LeanPro, with Pictogramming, Distance between centers: 1000mm, Center heigh 175mm, Grinding Wheel head rotation (B) 360° (1°), 2 ext Grinding Wheels, 1 int Grinding Wheel, Ext Grinding wheel, 400 mm x 40 mm x 127 mm, overhauled spindle > see photos, Workhead, CM 4, 0-1000 RPM, CNC Fanuc, Programming: Pictogramming, Heidenhain linear encoders, This machine can be inspected under power in our warehouse in Gussago BS Italy

The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.

GENERAL Project No.: 905789 Quantity: 1 pcs. Manufacturer: BUDERUS Type: BDG 220 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Spindle Approx (hrs): 3000 Shifts machine one approx. (hour): rarely used DESCRIPTION GRINDING Max. workpiece diameter 440 mm Max. workpiece height 150 mm Travel in X 170 mm Max. rapid traverse speed in X/Z 30 m/min Max. feed speed in X 0.01-15 mm/min Max. speed workpiece spindle 1000 1/min OTHER EQUIPMENT Workpiece probes for measuring thickness deviation Gate sensor Splash protection cladding with fully encapsulated working area Automatic work room door Lighting in the work area Mechanical oil/emulsion mist extraction system Coolant device with paper belt filter High pressure pump 25 bar Mobile control unit for set-up operation with electronic handwheel Machine condition light Au ...

Favretto MD 300 Universal Surface Grinding Machine CNC Manufacturer [manufacturer]: Favretto Type [ type]: MD 300 Control unit: DTG Plus / Siemens 840D Baujahr[construction year]: 10/2006 Table size: 3,220 mm Grinding travel length: 3,200 x 900 x 725 mm Magnetic table/plate size [magnetic table/plate size ]: 3,000 x 600 mm Longitudinal table speed: 1–40 m/min Cross table speed: 5 m/min Cross locking mechanism speed: 1–50 m/min Maximum load: 4,000 kg (without magnetic plate) Grinding wheel size: 508 x 203.2 x 100 mm Grinding wheel speed: 1,400 rpm Motor power of grinding mandrel: 22 kW Weight of the machine approx.: 17,500 kg Dimensions[machine size]: 9,400 x 3,550 x 3,000 mm Accessories: Magnetic tabletop [magnetic tabletop] coolant press with paper filter various grinding wheels [various grinding wheels] Documentation We will be happy to answer any furt ...

Very good surface grinding machine Table surface / working area 200 x 600 mm

CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right

Control Other Grinding length [mm] 600 Grinding width [mm] 400 Grinding spindle: Speed 1,400 rpm Power 3.7 kW Grinding wheel dimensions (max.) 300 x 50 x 76.2 mm Work table: Clamping surface magnetic clamping plate, 600 x 400 mm Table load (max.) 600 kg Hydraulic table drive Longitudinal table stroke 200 - 650 mm Rapid traverse 28 m/min Grinding area 600 x 400 x 375 mm Equipment/accessories: Measuring System Engine Measurement System in X/Y/Z Dressing system prism arm for einkorn diamond Cooling coolant system with paper belt filter, tank capacity 140 l Other equipment Partial space encapsulation, work area light

-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

Auction-ID: A1-45714-2

Working diameter: 40 - 250 mm Automatic work piece loading and removing for ball diameters: 40 - 105 mm Manual loading for diameters: 105 - 170 mm Direct ball attaching: 170 - 250 mm Rotation speed, stepless: 10 - 300 rpm Grinding spindle speed range: -160 - 3150 rpm -80 - 1580 rpm -38 - 775 rpm -20 - 385 rpm Weight: 6,5 tn Electrical connection: 17 kW Year of manufacturing: 1991

Grinding wheel flange for Kellenberger / Strausak u.-Miwatec grinding machines type 57 U / W in special design. Questions us please at we do extensive accessories for these machine types.

Grinding wheels recording for Kellenberger / Strausak u.-Miwatec grinders. Grinding wheel holder for 76 mm bore. More technical info. on request.

Grinding wheels recording for Kellenberger / Strausak u.-Miwatec grinders. Wheels shot 38 mm. For more details please call us. We carry special accessories in our program. We repair and repaired on the spot and make complete engine overhauls Special grinding machines

Reduction sleeves for work piece headstock recording MK 5 Reduction MK 5 / MK 1 MK 5 / MK 2 MK 5 / MK 3 MK 5 / MK 4 Reduction sleeves with forcing nut. Price indication per piece. We carry new & - used Center points in special dimensions.

We give our wheel bearing. Vitrified bonded grinding wheels for metal processing. From 100 mm to 600 mm in diameter. We carry also diamond and CBN wheels for tool grinding machines new and used. Strausak Fleximat 91 we have yet complete disc sets for all common diameters for the machining of solid carbide and HSS milling and drilling tools. Price and info. on request.

We give our wheel bearing. Ceramic grinding wheels of different binding and hardness. Dimensions von75 mm to 600 mm. The discs are new, unused, and undamaged. Retail possible, price on request.

We have a very wide range of accessories for Kellenberger - Santiago &-Miwatecmaschinen. Grinding wheel flanges new u. - used. Chuck flange recordings MK 5 SK 50 for magnetic Chuck, three & four-jaw Chuck. Running with Center points, and fixed. Three-jaw four-jaw &-special Chuck. Magnetic clamping plates, cross - ring - Sternpolteileung. Truing devices, RADIUS &-inclined dressing Lynetten 2 & 3 jaw

We offer a new Movomatic Tischlängspositionier Setup. The device is new, unused and undamaged. The device is longer years in our camp, we have never used this. It is also can be used with security at other cylindrical grinders manufacturers.

Work table: 750 x 290 mm, table height: 185 mm band length: 2600 mm strap width: 150 mm abrasive belt rear: 850 x 200 mm grinding unit swiveling: 90°-45° belt speed: 20 m / sec. Additional table: 330 x 330 mm oscillation stroke: 20 mm Oszilationsmotor: 0.25 (0.34 kW) suction connection Ø: 120 mm motor power output S1 100%: 3.0 kW (4,0 PS) motor power S6 40%: 4,5 kW (6.0 HP) voltage: 400 V machine dimensions (W x D x H): 1700 x 700 x 1080 mm weight approx.: 180 kg

Band dimensions: 150 x 2000 mm speed: 14.5 / 29 m / sec. Contact plate: 200 mm / 155 mm plan grinding table diameter: 460 x 150 mm Extractor connection: 100 mm in diameter engine power: 4 kW

Surface grinding machine. Magnetic chuck of 550x250mm. Table travel: 700mm. Grind surface area: 600x350mm. Max. height: 375mm. Cross travel: 300mm. Wheel: 350x127x50 / 300x127x100 Weight: 2900Kg.

Tip height: workpiece or grinding diameter 500 mm centre distance: approx. 2000 mm maximum workpiece weight: 1200 kg wheel dimensions: 600 Ø x 300 mm wheel speeds: 965 RPM elect. Supply: 380 V, approx. 15 kW space: 2300 x 9000 x 2000 mm weight: 13000 kg

Tip height: Grinding diameter 250 mm centre distance: loop length 575 mm grinding wheel dimensions: 500 x 60 x 127 mm Electr. Supply: 380 V, approx. 9 kVA kW space: 2650 x 2600 x 2240 mm weight: 3400 kg

Key data: 1000 , 600 , 400

Surface grinders - horizontal ELB perfect BD 10 PLC Second-hand machine overhauled 2014 Surface grinders - horizontal ELB-SCHLIFF perfect BD 10 PLC Second-hand machine Grinding length: 1000 mm Grinding width: 600 mm Workpiece height: 600 mm Table size: 1000 x 600 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 0-35 m / s U/min Total power consumption: 35kW Machine weight approx.: 6 t Space requirement approx.: 3.8 x 2.5 x 2.5 m Part of 2014 overhauled with 12 month warranty Paper machine Magnetic clamping plate 1000 x 600 Automatic dressing device with compensation 1 flange Items put up

Spindle speed min: 9,000 Umd.min Max: 15.000 Umd.min Tip height min: 230 mm Max: 510 mm Spindle stroke: 210 mm Horiz. Table large: 700 x 1000 mm Table stroke: 1,800 mm Equipped with: - feed table - feed Hor. Grinding movement - coolant equipment - protection doors table

specifications: - Load capacity positioning base approx. 750 kg - Flatplate diameter 500 mm - max. workpiece diameter 1600 mm - Height turntable with horizontal position approx. 750mm - Turntable with right,- + left run - Axis of rotation turntable endless 360 ° - Rotation time per revolution 12.5 sec. - Pan left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolt for clamping the workpiece in the middle of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder female thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space required approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - separa ...

Band dimensions: 75 x 2,000 mm speed: 14.5 / 29 m / sec. Contact plate ø x B: 200 / 80 mm plan grinding table: 460 x 75 mm suction connection Ø: 100 mm motor power output S1 100%: 2.4 / 3.0 kW absorbed motor power S6 40%: 3.0 / 4.0 of kW voltage: 400V dimensions (L x W x H): 1080 x 440 x 1000 mm weight about: 67 kg

Horizontal grinding optimum surface grinders ELB - 6375 ND - PLC Second-hand machine Surface grinders - horizontal ELB optimal 6375 ND - PLC Second-hand machine overhauled 2016 Surface grinders - horizontal ELB-SCHLIFF optimal 6375 ND - PLC Second-hand machine Grinding length: 600 mm Grinding width: 375 mm Workpiece height: 375 mm Table clamping surface: 600 x 350 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 4.7 kW Table speed: 2-30 m / min Grinding wheel speed: 1450 RPM Total power: 12kW Weight approximately: 3.5 t Space requirement approx.: 2.8 x 2.5 x 2.5 m Part overtaken 2016 + 12 months warranty, condition Control with touch screen new Paper machine Magnetic Chuck 600 x 350 Automatic table dressing with compensation 1 flange Items put up Installation / commissioning / transport

Gr. Swing diameter: 600 mm Top width: 2200 mm Gr. Grinding diameter on grinding wheel 800 mm Ø: 125 mm Wheels Ø use of put sticks: 20-125 mm Grinding wheel dimensions: 800 x 28-800 x 42 x 305 mm 2 wheel speeds 3 workpiece speed: 32, 55 and 96 RPM Table Shift manual coarse/fine: 10/2 mm Machine. Feed speed of the grinding wheel: 0,005 - 0,025 mm Table 6-speed: 120-1540 mm / min Grinding spindle stock drive: 8 kW Electr. Supply: 380/400 V, 10 kW Space requirements: 6100 x 2300 x 1600 mm Weight: 7T

Discus Werke DSH 600/1000 Side Surface Grinding Machine This type of machine is a machine with a motor-driven grinding spindle. The clamping and grinding of the workpieces is carried out with clamping devices tailored to the respective work. The devices are attached to the machine bed. The column saddle on which the motor spindle is mounted serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side Surface Grinding Machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 liters Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of construction: 1964 Condition: used The side surface grinding machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure,  ...

Special price for stock goods! Only while stocks last! Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact disc Ø x W: 200 / 80 mm Face grinding table: 460 x 75 mm Suction connection Ø: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Characteristics: - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous face grinding surface for optimal grinding of long workpieces - Constant belt tension due to spring-loaded clamping device - Universally applicable for grinding edges, surfaces and cylindrical grinding - Including quick clamping system for fast belt changes - Easy adjustment of the parallel belt run by means of adjustment screw - Graphite coating on the face grinding surface increa ...

1 Qty.1 Second-hand brush grinding machine Mfc.: Gurutzpe Type: Brushes cutting machine Built: 1975 Model: Max. Q800x2500 2 Qty. 1 Second-hand Rubber Grinding Machine Mfc.: Churchill Type: PCH 24" X 96" Built: 1957 Model: Max. Q600x2400

High-quality construction Drive roller is crowned (thus the sanding belt centered automatically centered on the role) and fully Vulcanized for longest life and best smoothness Tool-less and allow fast, easy change of the sanding belt Stepless height adjustment for optimal setup of the belt sander on the user Free adjustable metal fence to the optimal and safe guide workpieces during use of the large plan grinding area Speed design optimized for burning of the workpiece during the machining can be excluded as far as possible Models with fume control system equipped with robust and flexible suction hose Motor protection switch with CEE collar Steckvorrichtung incl. phase inverter 5 year warranty on the motor 1 year warranty on the belt sander Strap length: 2000 mm Band width 75 mm Plan grinding range 600 mm Speed 15/30 m/s RAL 9007 colour Motor three-phase 400 V 3.0/3,75 kW Suction capa ...

TACCHELLA ELEKTRA 1518 MPC CNC grinding machine was built in Italy in 1999. Characterised by high reliability and performance, the machine is used in the process of highly accurate grinding of the external rotating surfaces of workpieces with a maximum length of 1500 mm and a diameter of 350 mm. The TACCHELLA CNC shaft grinding machine has a large workspace with tailstock, grinding wheel spindle and workpiece spindle. After placing a shaft with a maximum weight of 50 kg in the spindle holder, the workpiece is ground at high speed by an incremental encoder driven grinding wheel with a maximum diameter of 450 mm. In order to simplify the machining process, the ELEKTRA 1518 MPC CNC grinding machine is equipped with state-of-the-art features, such as the HOFLER BALANCE SYSTEMS VM 24 operator panel and a functional and user-friendly FAGOR CNC controller, which allows full control of the m ...

HF FeinfräÃ? & - grinding spindle, manufacturer Fischer Schaffhausen. Designation; MFVS 830, Series number: EL-S-007 The spindle is undamaged, unused and in their original packaging. The spindle can be used with electrodes and-precision Strausak type. 82 CNC. or as RF - internal grinding spindle. Tech. Data.: 220 V 600 HZ 4-pin 2.5 KVA 1.4 KW / 600 HZ for further information: The grinding technology: Tool &-profile grinding coarser has in 2001 of the production & - Strausak license rights wage purchased. The rights include the complete series 57 U/W, 57 U CNC, 57 W CNC 3.-4.u-5-axis, and from this all developed machines.

Machine type: CNC centerless grinding machine Make/Model: MIKROSA KRONOS M SPECS CNC Fanuc 21iM grinding wheel max sizes: 250mm wide x 610mm diameter 2 controlled axis on grinding wheel dressing (interpolated) 1 axis on regulating wheel 1 axis on plunge axis (workpiece diameter) Throughfeed grinding: yes Plunge grinding: yes can be inspected under power in our warehouse in Gussago BS (Italy)

Surface grinders - horizontal ELB-SCHLIFF SWBE 10 PLC Second-hand machine Mint Control cabinet, motors, wiring, control new Hydraulic new, trim, loop length: 1000 mm Grinding width: 500 (600) mm Workpiece height: 600 mm Table size: 1000 x 550 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 5-35 m / sn Total power: 18 kW Machine weight approx.: 5,5 t Space requirement approx.: 3.5 x 2.5 x 2.5 m General outrun 2019 with 12 month warranty Paper machine Levelling feet Installation included Instruction includes