225 TETRA PAK used machine for sale

The Tetra Pak TBA/8 110V is a proven aseptic linear filling machine for liquid foodstuffs, which is particularly known for its reliability. It is often used in dairies for UHT milk, juices or similar products.

The TBA 8 V110 1000ml Square is a space-saving Tetra Pak solution for safe, aseptic filling of liquids. Their square design ensures maximum stability and efficient display on the shelf.

Tetra Pak Separator H845 – Factory New High-Capacity Milk Separator The Tetra Pak Separator H845 is a high-performance industrial separator designed for hot milk processing in dairy production facilities. Built with Tetra Pak AirTight technology, this separator ensures gentle product handling, minimal oxygen intake, and reduced product losses, making it ideal for modern dairy processing plants. This factory-new unit, designed in 2024, has never been installed or used in production, offering manufacturers the opportunity to acquire premium Tetra Pak technology in unused condition. General Information - Manufacturer: Tetra Pak - Model: Separator H845 - Condition: Factory new - Year of Design: 2024 - Installation Status: Never installed / never used in production Technical Specifications - Application: Hot milk separator - Processing Capacity: up to 40,000 l/h - Air Pr ...

Tetra Pak Tetra Spiraflo Tubular Heat Exchanger (THE) previously used in a dairy for whey protein as pre-heater with indirect hotwater preparation (15 - 70 °C), holding section (1 - 3 minutes) and cooling section (65 - 10 °C)., Unit exist out of:, - 7x tubes for pre-heating (Tetra Pak MT-38/1x20s-6, total surface area: 2,25 m2, product connection DN25, hotwater connection DN20 with indirect hot water system with plate heat exchangers, pumps (CH18-10 A-W-G-BQQV - 7,5 m3/h - 0,72 kW), steam valves (Samson), expansion vats, manual valves and interconnecting piping., - 9x tubes for cooling (Tetra Pak MT-70/4x16s-6s-1, jacket: 20 bar - 110°C - 16 liter, inside: 50 bar - 110 °C - 3,6 liter, total surface area: 10,17 m2, product connection DN38, (ice)water connection DN50)., - Flowmeter (Endress+Hauser - Promag 300)., - Holding tube, DN 40 (6x 6 meter), complete with bracket and swivel bend ...

Unused Inlet Device, Clamp coupling for Tetra Pak 618 - 718 - 818 Separators., Ref 22 - Part No 548412 01 - Inlet housing, Ref 23 - Part No 538247 04 - Clamp coupling, Ref 24 - Part No 538248 03 - Gasket, Ref 25 - Part No 541709 80 - Elbow pipe, Type of Machine: Inlet device, clamp coupling

Unused Outlet Pipe + Sleeves + Impellors of a Tetra Pak HMRPX 618 Separator., Ref 1 - Part No 540493 02 - Outlet pipe, Ref 3 - Part No 581978 01 - Guide sleeve, Ref 16 - Part No 540527 02 - Impellor bottom part Ø 140 mm, Ref 20 - Part No 540519 02 - Impellor top part Ø 140 mm, Ref 26 - Part No 540551 01 - Spacing sleeve, Ref 38 - Part No 540528 02 - Impellor bottom part Ø 120 mm, Ref 40 - Part No 540520 02 - Impellor top part Ø 120 mm, Type of Machine: Outlet set

Tetra Pak automatic direct standardisation unit which is designed to handle skimming of whole milk and standardisation of cream or standardisation of both cream and milk. Skid mounted unit including PD340 Magnetic flow transmitter for standardised milk, PD340 Magnetic flow transmitter for cream remixing, PD340 Magnetic flow transmitter for standardised cream, density transmitters, valves, some interconnecting piping and a control panel with recorder of fat content, display for flowtransmitter and Alfa Laval Alfast Operator Panel. Previously used in combination with an Alfa Laval HMRPX 714 HGV-74C milk skimmer separator (20.000 liter per hour)., Additional features:, Some clamps for connection / piping are missing., Type of Machine: Standardisation unit for milk, Capacity: 20.000 ltr/h, Weight: ± 500 kg, Dimensions: ± 120 x 120 x 220 cm

Unused Tetra Pak Pressure Gauge, 0 - 10 bar / 0 - 1.0 MPa., Model: 233.50.100 LBM 990.22 1 1/2 Tri-clamp 10bar/MPa., Part No: 90522-0172., Type of Machine: Pressure Gauge

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

Lower filling pipe, previously used on a Tetra Pak A3 Flex 250 ml Slim 100V., Type of Machine: Aseptic carton filling machine, Dimensions: 84 x 9 x 9 cm, Weight: 2 kg

Tetra Top Cleaning unit (TTCU) previously used on Tetra Pak TT/3 2000 carton filler for Tetra Top 250 Mini Eifel C38 cartons. The external Tetra Top® Cleaning Unit offers excellent cleaning and disinfection of your hygiene chamber. You can clean and disinfect both sides simultaneously or choose to clean and disinfect one side at a time. One unit is able to clean up to two Tetra Pak® TT/3 filling machines. 3x separate vats for P3-oxonia active S, Mip CA and P3-horolith V. Integrated centrifugal pump (11 kW). Control panel with PowerFlex40 frequency converter and ABB RVG200 operator panel. 6x valves with pneumatic actuator (Air Torque AL-79)., Type of Machine: Cleaning unit, Development step: -0200, Production hours: 1.166 hours, Drawing Spec.: 2866825-0200, Dimensions: 145 X 125 X 295 cm, Weight: 850 kg

Tetra Pak Capper 60 Cap applicator, previously used for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. This cap applicator was running in combination with a Tetra Pak TT/3 2000 carton filler. The applicator has a small footprint. Number of productions hours: 5.268 h. Applying caps quickly and accurately. The Tetra Pak Capper 60 uses a feeding screw and six torque- and speed-adjustable rotary capping heads to apply caps on stationary packages. Change package heights within the same bottom format in only five minutes. Control panel with Allen-Bradley CompactLogix L36ERM PLC and separate operation panel with Tetra Pak touch screen panel. The production capacity goes up to 4.500 packs per hour. Including collecting vat and elevator (Bonino, Auxiliary Feeder, code nr 56849, date 2018). Including all available manuals and all programs (language in program English and Swedish). Ca ...

Tetra Top Sprue Remover Unit (SRU) for removal of the small plastic particle on top of the Tetra Top packaging after filling/closing, previously positioned after a Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including stainless steel control panel and separate operation panel., Type of Machine: Sprue Remover Unit, Capacity: 4.500 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0100, Drawing Spec.: 3434618-0100, Weight: ± 325 kg

The Tetra Pak Tetra Straw Applicator (TSA 46) has a compact design and is very reliable. Trouble-free operation in a carton filling lines is guaranteed even with long periods of use. It is installed between the filling machine and the packaging machine and has servo motors and inverters. The regulated and controlled application of the straw is thus made possible without any problems. The constant and trouble-free speed of up to 8.000 units/h is ideal for use in conjunction with the Tetra Pak TBA 19 filling machines. Previously used for 200 ml Slim cartons with U-Straw 4. Production hours: 92.204 hours. Including Nordson ProBlue 4 hotmelt unit. MM + SPC + EM Manuals available., Type of Machine: Straw applicator, Capacity: 8.000 pieces per hour, Type of carton: 200 ml Slim, Development step: 10V, Drawing spec.: 678547-0101, Production hours: 92.204 hours, Dimensions: ± 230 x 100 x 210 cm, ...

The Tetra Pak Tetra Cardboard Packer 70 (TCP 70) is an automatic secondary packaging machine designed for grouping and packing filled Tetra Pak carton packages into wrap-around cardboard or corrugated board cases. It is widely used in dairy and beverage packaging lines operating in ambient conditions. It is flexible and has a number of possibilities when it comes to package sizes, packing patterns and cardboard units. This machine is previously used for 1 Liter Slim / Base cartons, 4x2, in a tray (not wraparound). Output: up to 7.000 cartons/hour (depending on format and configuration). Feeding side: Left hand. Infeed type: Multi. Infeed: U-form. Conveyor speed in: 35 m/min. Conveyor width: B79/B65. Hotmelt unit (Robatech KPC12, serialnr 134590, year 2005)., Type of Machine: Cardboard Packer, Capacity: up to 7.000 cartons per hour, Type of carton: 1.000 ml Slim / Base, Development step:  ...

Tetra Top Granulate Supply Unit (GSU) previously used on Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including side channel blower and vacuumpump from Gardner Denver, G-BH1 2BH1510-7HH57, 4 kW - 345 / 415 V - 50 Hz - 2.920 rpm, pressure: 390 - 440 mbar and control panel with Allen-Bradly PLC., Type of Machine: Granulate Supply Unit, Capacity: 9.000 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0500, Drawing spec.: C-1025041-0500, Weight: ± 250 kg

Tetra Top Sprue Remover Unit (SRU) for removal of the small plastic particle on top of the Tetra Top packaging after filling/closing, previously positioned after a Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including stainless steel control panel and separate operation panel., Type of Machine: Sprue Remover Unit, Capacity: 4.500 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0100, Drawing spec.: 3434618-0100, Weight: ± 325 kg

Unused Servo Control for a Tetra Pak Cap 30 Flex. Tetra Pak article number: 90605-9390. Official Tetra Pak description: Servo-Antrieb, K5500 EtherNet/IP 528VAC., Type of Machine: Servo drive, CAT NO: 2198-H025-ERS, Instructions: 2198-IN001x-xx-x, MAC Address: 40:41:01:E0:74:10, Main input: 195-264/324-528 Vac 8.3 Arms 3 Ph 50/60 Hz, Control input: 24 Vdc 2.8A, Motor output: 0-460 Vrms 3 Ph 0-590 Hz 8 Arms Continuous, 20 Arms Peak

Tetra Pak Capper 60 Cap applicator, previously used for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. This cap applicator was running in combination with a Tetra Pak TT/3 2000 carton filler. The applicator has a small footprint. Number of productions hours: 5.015 h. Applying caps quickly and accurately. The Tetra Pak Capper 60 uses a feeding screw and six torque- and speed-adjustable rotary capping heads to apply caps on stationary packages. Change package heights within the same bottom format in only five minutes. Control panel with Allen-Bradley CompactLogix L36ERM PLC and separate operation panel with Tetra Pak touch screen panel. The production capacity goes up to 4.500 packs per hour. Including collecting vat and elevator ( Bonino, Auxiliary Feeder, code nr 57822, date 2019 ). Including all available manuals and all programs (language in program English and Swedish).  ...

Unused Complete Outlet Triclamp including Outlet Pipe + Sleeves + Impellors Tetra Pak BM618 / BM714 Bactofuge, Machine unit number or subassembly description: 562012-03 according outlet device drawing., Type of Machine: Complete outlet

Film Wrapper Machine – TFW67 General Information: - Manufacturer: Tetra Pak - Model: TFW67 - Year of Manufacturing: 2004 - Condition: Used - Machine Type: Film Wrapper / Secondary Packaging Machine System Overview: The Tetra Pak TFW67 Film Wrapper is a high-performance secondary packaging machine designed for automatic film wrapping of carton packs in demanding industrial environments. Built for continuous operation, the TFW67 ensures reliable pack collation, precise film application, and consistent sealing quality, making it a proven solution in dairy and beverage production lines. This model is widely recognized for its robust construction, stable high-speed performance, and seamless integration into existing Tetra Pak packaging systems. Technical Specifications: - Packaging Formats - 4 × 1 - 4 × 2 Output Capacity: - Up to 9,000 packs per hour Ope ...

Microfiltration System – Bacteria Removal (Dairy Applications) General Information: - Manufacturer: Tetra Pak - Model: Tetra Alcross M - Year: 2005 - Automation: Fully automatic - Application: Bacteria extraction / microfiltration for dairy products System Overview: The Tetra Alcross M is an industrial-grade microfiltration system designed for efficient bacterial and spore reduction in dairy processing, particularly in skim milk applications. Engineered for continuous production, the system utilizes high-performance ceramic double-layer membranes, enabling reliable separation performance and consistent product quality. This technology is widely used in ESL milk production and other high-hygiene dairy processes, where stable filtration performance and sanitary design are critical. The robust construction and proven reliability of the Tetra Alcross platform make it su ...

Packaging type Tetra Prisma Aseptic Shape of packaging Squareline Packaging volume 1000,00 ml Voltage 3N 400/230 V Frequency 50 Hz

Volume : 1000 and 1500 ml Format : Slim

Used, in very good condition Packaging type : Tetra Prisma Aseptic Package volume : 1000,00 ml Shape of packaging : Squareline

Tetra Pak TBA19 200 ml Slim Aseptic Filling and Packaging Line Complete aseptic carton filling and packaging line designed for 200 ml Slim cartons. This line combines proven Tetra Pak filling, straw application, shrink wrapping, and secondary packaging equipment, making it an ideal solution for dairy, juice, and beverage producers seeking reliable aseptic packaging technology. Line Configuration - The system includes the following Tetra Pak equipment: - Tetra Pak TBA19 200 S Filling Machine - Tetra Pak Straw Applicator 21 - Tetra Pak Multi Shrink Wrapper TFW 72 - Tetra Pak Cardboard Packer 70 - This configuration provides a complete production flow from filling to final carton packaging. 1. Tetra Pak TBA19 200 S Filling Machine - Manufacturer: Tetra Pak - Model: TBA19 200 S - Specification: 648160-0101 - Year of Manufacture: 1998 - Operating Hours: 16,727 h - Filling ...

A comprehensive package of spare parts from Tetra Pak is available. Machines: Tetra Pak packaging systems and related equipment. Spare parts: Sleeve for pipe connections, cone ID6xD6mm aluminum, cutting ring 6mm, spacers, spring 1.00x12.00x50.0mm 1. 4310, screw M5x12, sealing ring 8x14mm, O-ring 15x2mm, retaining ring DIN 471, valve spring, bearing 6001-2RS, plain bearing bush 10x12x15mm, hose connector 6mm, seal EPDM, connection nipple R1/8, guide bush 20mm, plastic sealing cap, insulating washer 22x3mm, clamping element and others. Documentation available.

Tetra Pak A3 Compact Flex – 125 ml Slim Aseptic Filling Machine (2013) High-performance aseptic carton filling machine designed for efficient packaging of liquid food products in 125 ml Slim cartons. The Tetra Pak A3 Compact Flex offers reliable operation, compact installation, and flexible packaging capabilities for modern beverage and dairy production facilities. General Information - Manufacturer: Tetra Pak - Model: A3 Compact Flex - Year of Manufacture: 2013 - Package Format: 125 ml Slim - Production Capacity: 9,000 packs per hour Machine Design and Dimensions - Required Floor Space: approx. 20 m² - Machine Height: 4.3 m - The compact design allows easy integration into existing production environments while maintaining high production efficiency. Key Features High-Speed Production - Production capacity of up to 9,000 packs per hour - Reliable performance fo ...

Tetra Pak Aseptic Homogenizer 300 – Factory New (2024) High-performance aseptic homogenizer designed for advanced liquid food processing. The Tetra Pak Aseptic Homogenizer 300 delivers exceptional reliability, precision engineering, and high production capacity for demanding industrial applications. Built in 2024 and in factory-new condition, this machine has 0 working hours and has never been installed in production, making it an ideal solution for processors seeking modern aseptic homogenization technology. General Information - Manufacturer: Tetra Pak - Model: Aseptic Homogenizer 300 - Year of Manufacture: 2024 - Condition: Factory new - Working Hours: 0 hours (never installed) Technical Specifications - Maximum Capacity: 12,960 L/h - Working Pressure: 250 bar - Number of Pistons: 3 - Piston Diameter: 63 mm - Valve Design: Mushroom type with stainless steel sea ...

Used Tetra Pak TBA 19 / 200 ml Slim Leaf Filling Line Complete Tetra Pak carton filling line designed for packaging liquid food products in 200 ml Slim Leaf cartons. The line includes filling, accumulation, straw application, and secondary packaging equipment, providing a reliable solution for beverage and dairy producers. Line Configuration - The filling line consists of the following equipment: - Used Tetra Pak Filling Machine – TBA 19 / 200 ml Slim Leaf - Used Tetra Pak Accumulator – ACHX10 - Used Tetra Pak Straw Applicator – TSA21 - Used Tetra Pak Cardboard Packer – TCBP 70 - Conveyor System (to be designed according to factory layout) Tetra Pak Filling Machine General Information - Manufacturer: Tetra Pak - Model: TBA 19 - Year of Manufacture: 2003 - Package Format: Slim Leaf Technical Specifications - Capacity: 7,500 packs per hour - Package Volum ...