9 SCM spindle moulders used machines

Table milling machine SCM T 120 C. SUVA protection Maintenance: Malawer AG Spindle 30 mm 2900/4400/6000/7800/10000 RPM Weight 450 kg Masch No. 20474 L x W x H: 115 x 90 x 86 (150) cm Built in 1961 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

SPINDLE MOULDER type SCM T130 . second hand diam. spindle mm. 40 volt. 380/50

SPECIFICATIONS: Working table: 1100 x 900 mm Spindle: Ø 40 mm Manual adjustment Engine brake Installed power 5.6 kW Additional: Various tools

SPECIFICATIONS: Working table: 1050 x 970 mm Sliding table Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW Inclusive: Various tools

Spindle moulder with tilting shaft SCM mod. T110I - CE -Volt. 400/50 - Matr. AB/118120 - Year 1998

SPECIFICATIONS Table dimensions: 2530 x 400 mm Equipped with extendable table Spindle: Ø 35 mm Speed: max. 10,000 rpm Installed power: 4 kW

TECHNICAL DATA: Spindle: Ø 35 mm Spindle tilt: 0° - 45° Manual spindle height adjustment Adjustment of the direction of rotation Adjustable speed from 3000 to 10000 rpm Installed power: 5.5 hp EQUIPMENT: 1 3-roller drive (Maggi Steff 2034)

Router R8, large table, ready for demonstration from the site.

SCM T 130 LL heavy table milling machine Version LL - long table with extendable frame support Motor 7.5 kW 5 speeds 3000 - 10000 rpm. autom. Spindle adjustment high - low Top control panel Milling fence with fine adjustment WITHOUT feeder Machine is FUNCTIONAL TESTED in GOOD - CONDITION From stock Lieboch

SCM Spindle Moulder Model T150 with Tilting Shaft - spindle moulder shaft inclination -10 / +45 degrees - spindle moulder shaft diameter 35mm - max tool diameter with profile guide 250mm - maximum tool diameter that can be retracted under the table 320mm - "Fast" sector table for optimizing the support of the piece under the tool, adjustable from the outside, as an alternative to the table rings Machine with: Flat "LL" version with 2 profile extensions - length 2500mm, complete with adjustable front support bar for large pieces, and with emergency button Guide and spindle moulder shaft with electronic programming Complete with: - Hanging control panel - total excludability of the guide from the plane - 3-axis microprocessor electronic programmer for automatic programming of the different Positions : * spindle moulder height * Spindle moulder tilt * Positioning  ...

Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000

SPECIFICATIONS: Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW

Mill-tenoning machine SCM Flex 1 Spindle diameter 40mm Total spindle height 200mm Two-speed motor with a power of 6.6/8kw Variable speed on belts: 3250/6500 and 5000/10000r.p.m Electric spindle lift Maximum cutter size 270mm Cutting unit 2.2kw Automatic Sidecar Pneumatic material clamps Four-roller feed Net price

SCM T130E spindle moulder Spindle diameter 40mm Overall length of spindles 180mm Spindle speed variable by inverter up to 10,000r.p.m Main motor power 7.5kw Spindle rotation right and left Electronic spindle height adjustment Electronic setting of fences Electronically adjustable roller feed 4-roller feed Maggi Variosteff 4 Feed speed control via variator CE Certified DTR documentation Year of production 2004

Superset NT 31 with 14 axis control and 1000 programs Feed rollers in front of the dressing spindle Position 1 - Dressing spindle Position 2 - Right spindle with 2 axis ( up / down ) Position 3 - Left Spindle Horizontal Top with 3 Axis (Up/Down and Diameter Setup) Position 4 - First Horizontal Spindle with 2 Axis (On/Off and Diameter Setup) Up/Down Coupled with Position 5 Position 5 - Second Lockers Horizontal Top with 3 Axis ( Up/Down and Diameter - Setup ) Position 6 - Second Spindle Horizontal Bottom with 2 Axis ( Up / Down ) Motors 6 x 7.5 KW Feed Continuously variable from 6 to 36 rpm with 4 KW Feed roller before and after position 2 Vertical Right with axis control ( on / off ) Planer heads 5 pieces on position 1-2-3-4-5 type. TERSA

SCM T150 spindle moulder Spindle diameter 35mm Overall length of spindles 180mm Electric spindle lift Electric fence passage Electrically adjustable angle -10/45 Spindle speed variable 3000-4500-6000-7000-10000r.p.m 5.5kw motor DTR documentation Net price

4 spindles moulder SCM mod. COMPACT 23K Composition: - 1st bottom horizontal spindle - 2nd vertical spindle right - 3rd vertical spindle left - 4th horizontal top - Working width mm. 230 mm. - Infeed table 2000 mm. - Year 2000 - CE rules

SCM T130 Low Spindle Milling Machine Spindle diameter 30mm Spindle length 140mm 4kw main motor Rotation speed change on the belt 3000/4500/6000/7000/10000 Longitudinal trolley in the worktop Net price

SCM T130 Low Spindle Milling Machine Spindle diameter 30mm Spindle length 140mm 4kw main motor Rotation speed change on the belt 3000/4500/6000/7000/10000 Longitudinal trolley in the worktop Net price

Table extensions  Table length 240 cm  Swivel range -10+45 Max. spindle protrusion 175 mm Motor 7.5 kw Weight 950 kg Compressed air 6 bar

Multi-spindle drilling machine manufactured in 2000. This SCM Morbidelli Zenith F2 is designed for processing flat materials such as DTD, MDF, laminated boards, and solid wood. It features a maximum working width of up to 3,200 mm and a maximum working height of approximately 800 mm. If you are looking to get high-quality drilling capabilities, consider the SCM Morbidelli Zenith F2 machine we have for sale. Contact us for further details.

S 400 elite S 32 professional format circular saw Trimming length 3200 mm max. cutting height 138/98 mm 90/45 with scribble max. saw blade diameter 400 mm Speed Main saw blade 4000/5000 rpm Engine power 7 kW 9.5 hp 400 V 50 Hz Prescribing 0.55 kW/0.75 hp Upper protective hood Suction nozzle diameter 120 mm Weight 715 kg G&STÜ-5504842 Option: Angular cutting device with grid division G&STÜ-5510403

Engine power: 400V 2 PS S1 Planing width 260 / 300 mm Drum: 3-Tersamesserwelle Dressing table length: 1040 mm / 1200 mm Clearance height: 3-200 mm Formatschiebetisch: 1070mm be hemline Cutting height: 80 mm Saw-45 ° 90 ° swivel Milling machine 90 ° starr Blower rpm: Speed of 4200-6300 rpm or 5000-7500 RPM G & STÜ 5500027 260mm planing width! SPECIAL PRICE NET OF 3599.- G & STÜ 5500030 300mm planing width! SPECIAL PRICE NET OF 3999,-

AUTOMATIC BORING machine 35 spindles SCM TOP 35 second hand machine electric movement of boring head 0° / 90° technical details : n. 35 spindles center distance between spindles mm 32 center distance between first and last spindle of the drill head mm.1088 max. stroke of boring unit mm. 140 n.02 motors Hp 3 each one operating pressure atm 6-8 weight kg.800 volt. 380/50

SCM C30 4-fold combination machine Format Circular Saw Dressing Thickness Planer Machine Milling Machine Planing width 300mm Planing shaft: 3-tersa knife shaft Dressing table length: 1200mm Passage height: 3-200mm Format sliding table: 1070mm Besaeumlaenge Cutting height: 80mm Saw 90°-45° swivel Engine power: 400V 2 hp S1 Milling machine rigid 90° Milling machine rpm: Speeds of 4200-6300 rpm or 5000-7500 rpm G&STÜ-5500030 relkag21 SPECIAL PRICE: Fits in any small workshop!!!!!