7 SCHRÖDER folding machines used machines

Offer 24483 Specifications: - Max. working width 1020 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle adjustment selectable 6 - 135 ° - 6-fold bending angle preselection - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - bending beam 50 mm - the lower beam 50 mm - E. footswitch - Upper bolster drive 400 V / 2.2 kW - Bending beam drive 400 V / 2.2 kW - Space requirement approx. W 2100 x H 1400 x D 1100 mm - Weight approx. 2000 kg

Key data: 3020 mm, 3 mm

one. Bending cheek presentation, foot pedal Sheet width: 3020 mm Sheet thickness steel: 3.0 mm Sheet thickness aluminum: 4.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: white/blue Total power requirement: 32 A Upper beam stroke: 200 mm Bending angle: 145 degrees Dimensions: 4300 x 2600 x 1900 mm Machine weight: 3960 kg Machine number: 220478

Specifications: - Max. working width 2020 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment pre-selectable 0 - 135 ° - Upper bolster clamping via eccentric lever + foot pedal - Largest opening width / stroke of the upper beam 100 mm - Height adjustability of the lower beam 25 mm - Space requirement approx. W 2950 x H 1200 x D 800 mm - Weight approx. 1450 kg

Key data: 3020 mm, 2 mm

with motor backgauge, numerical NC control, manual bending beam lowering, foot switch Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3020 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 3.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: green Total power requirement: 400 V Dimensions: 3800 x 1000 mm Machine weight: 4500 kg Upper beam stroke: 200 mm without roller scissors/ Opening width: 200 mm

Offer 25290 Specifications: - Max. working width 3040 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment selectable 6 - 135 ° - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - bending beam 50 mm - the lower beam 50 mm - Upper bolster drive 400 V / 0.37 kW - Bending beam drive 400 V / 0.75 kW - Manual backgauge - Split goat's foot bending splint - Space requirement approx. W 4000 x H 1400 x D 1200 mm - Weight approx. 3500 kg

Key data: 3020 mm, 1 mm

in good condition, POS 400 control with digital display, without stop system, with standard rail Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 3020 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Blechdicke VA/sheet thickness Stainless 1.0 mm Colour: white/blue Dimensions: 3930 x 700 x 1175 mm Machine weight: 2120 kg Motor power: 0.55 kW Upper bolster stroke: 120 mm without cutting device for cutting to length Bending angle (max.: 145 degrees Machine number: 180928

Key data: 3200 mm, 1 mm

with motor depth stop 1000 mm, with CNC graphic touch control POS2000 on the swivel arm, with offset bending beam Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 3200 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm Max. back gauge: 1000 mm Colour: blue/grey Dimensions: 4450 x 2000 x 1850 mm Machine weight: 2700 kg Upper beam stroke: 150 mm without roller scissors Opening width: 150 mm Bending angle (max.): 160 degrees Machine number: 8500110

Gr. working width: 4040 mm for sheet metal with a strength of 40 kg up to: 3 mm Upper bolster adjustment: 400 mm Underbeam adjustment approx.: 80 mm Max. bending angle adjustment electrically up to approx.: 180° Upper bolster variable speed drive: 4 kW Bending beam drive: 2 x 3 kW Back gauge, working range: 10 - 750 mm electr. Connection: 400 V Weight: 9 t Space requirement: 5570 x 2250 x 2000 mm high

Double-end profiler Schröder Double-sided tenon cutting and slitting machine For window production and frame woodworking Type T2701 Working width max. 4000 mm 3 motors per side: Shortcut saw 3 kW Milling machine 7.5 kW Milling machine 9.2 kW Shortcut saw swivel Saw blade diameter 400 mm Horizontally controlled against 8-fold turret head Milling units controlled horizontally and vertically for holding 2 tool sets each Diameter of the milling shafts 40 mm Clamping length 240 mm, tool diameter up to 400 mm Electric width adjustment Pneumatic clamping of workpieces Eject to the rear Automatic feed 15m/min. Return 30 m/min. Gentle cycle at cutting points 5m/min. Feed motor 0.09/0.85 kW Control cabinet with control With occupational safety barrier Dimensions 5800 mm x 2320 mm x H 2000 mm + Control cabinet 1200 mm x 800 mm H 1600 mm + Barrier depending on ...

Hand-operated 3-roll sheet metal round bending machine with asymmetrical roller order Specifications: - Working width max. 1020 mm - Material thickness max. 1.5 mm - Roller diameter 64 mm - Upper roller turned into a crown, can be swung forward - Rear shaft with handwheel diagonally adjustable for conical rounding - Lower roller adjustment with control lever and eccentric - Front shaft parallel - Space requirement approx. W 1250 x H 950 x D 750 mm - Weight approx. 200 kg

The Schröder N55 Injector is an industrial multineedle injector designed for professional food processing operations. Equipped with 55 needles and a conveyer belt system, it ensures even injection of brine, marinades or other liquids into meat products. Its stainless steel construction provides durability and hygiene, while pressure and speed controls allow precise process adjustment. Suitable for medium to large production environments requiring high throughput and consistent results. Technical specifications: Manufacturer: Schröder With transport belt Stainless steel construction 55 needles Approximate dimensions in cm: Length: 240 Width: 110 Height: 150 Control: pressure regulation and speed control Application: meat processing, injection of brine/saline into muscle products

Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm

Type: SCHRÖDER N 82 Number of needles: 82 Diameter of needles: 3 mm Product width: 420 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Width with filter for brine: 200,0 Length: 210,0 Height: 200,0 Compressed air: 6bar Power: 9,0 kW, 15А Voltage: 380 V, 50 Hz

Type: SCHRODER N 120 Number of needles: 120 Diameter of needles: 3 mm Product width: 620 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 120,0 Width with filter for brine: 200,0 Length: 220,0 Height: 225,0 Compressed air: 6,0 bar Power: 14,0 kW Voltage: 380 V, 50 Hz

Type: : Schröder N 138 Number of needles: 138 Diameter of needles: 4,0 mm Product width: 620 mm Transportation type: walking beam Product passage height: 200 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Length: 220,0 Height: 230,0 Power: 10,0 kW Voltage: 380 V, 50 Hz

Type: MAX 500 Max. product weight: 500 кg. Drum diameter: 1000 mm Machine dimensions in mm: Width: 1600,0 Lenght: 3100,0 (incl. loading trolley) Height : 2300,0 Unloading height: 750,0 mm. Vacuum pump: 40 m3/h Power: 4,0 kW Voltage: 3х400 V, 50 Hz, 8,0 A Weight: 760 кg.

Type: IMAX 520 Working with boneless meat Product width: 520 мм Cycles: 15 to 60 per minute Feed: max. 60 mm Product height: 130÷230 mm Number of needles: 200 (2 х 100), 4 мм Brine pressure: 0,5-4,5 bar Machine charging height: 1170 mm Compressed air: 6bar Voltage: 230/400 V, 50/60 Hz Connection: 10,0 kW ; 23 А Rotary brine filter DF 510 Machine dimensions in mm: Length: approx. 2100 Width: approx. 1350 (about 2500 mm with filter) Height: approx. 2300

Type: N 50 Number of needles: 50 Diameter of needles: 4,0 mm Max. product width: 350 mm Transportation type: walking beam Product passage height: max 180 mm Brine pressure: 0,5 - 4,0 bar Machine dimensions in mm: Width: 800,0 Length: 1600,0 Height: 1900,0 Power: 8,0 kW , 17 A Voltage: 380 V, 50Hz

Inline homogenizer Manufacturer: Gerstenberg Schröder Type: RL 280/170 Built: 2006 N°: 4299-2-197917 Power: 50 hp Volume: 6 l Speed: 1330 rpm at 50 Hz as good as new Weight: approx. 850 kg Application: Margarine, mayonnaise, dressings, sauces (continuous production) Capacity: 5000-10000 kg/h (for oil content 80%) LWH: 1800 x 800 x 900 mm

SCHRÖDER DM-500 ID.NO. 2117 Schröder DM-500 brine mixer with mixer and pusher that goes up and down. Dimensions 135 x 135 cm H 180 cm. Available 4x in stock.

Thermo-Combinator Crystallizer Schab Heat Exchanger / Cooler with scraped surface used Manufacturer: Schröder&Co Type: UTK 18/200-DH2A Stainless steel The system was used to heat, maintain temperature and cool ketchup. Hourly output approx. 1800 - 2000 kg 1 dosing pump with two pump heads for water/spice paste and tomato paste Capacity tomato paste 0-868 l/h Total dimensions approx. 3.5 x 1 x 1.5 m. Original price was approx. 270,000 DM The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.

Product number: 2829 Type: IMAX620 Serial number: 620.3023.03 Year of construction: 2003 Belt width: walking beam, 620 mm Needles: 2 x 150 pcs, 3 mm Product height: max 200 mm Speed: 15 - 60 cycles/min. Advance: 50 / 100 mm Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 16.5kW Dimensions: 2150 x 1600 x 2350 mm For boneless and bone-in products Including tool trolley Schröder rotating filter Type: DF510 Serial number: 634-11 Year of construction: 2011 Power: 3 x 400V, 50Hz, 0.22kW Dimensions: 1000 x 2650 x 1350 mm Schröder tube heat exchanger Type: RWT Serial number: RWT-5622-13 Dimensions: 400 x 1700 x 500 mm

sheet width: 3000 mm plate thickness: 3 mm weight of the machine ca.: t 3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Key data: 3000 mm, 3 mm

with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.