pharmaceuticals and cosmetics machines used for sale

• For banding bottles or folding boxes • 90° infeed • Grouping by hand over device • Bottle infeed with 2 screws (adjustable to each other) for shaped bottles, grouped from single infeed lengthwise to 6x crosswise • With 2 format screws for shaped bottles 63.5 x 32.5 x 108 mm and 67 x 38.5 x 114 mm • Folding box infeed conveyor • Translator with one gripper each for bottle and one suction plate for folding boxes • for PE film • film width 30 - 450 mm • film thickness 0,025 - 0,1 mm • Roll diam. max. 320 mm • Output max. 50 cycles/min (packs/min), format/product-dependent • Format range product 30-100 x 30-100 x 60-250 mm [L x W x H] / pack 30-300 x 60-380 x 60-250 mm [L x W x H]. • Film splicer for automatic film change without machine stop • Machine control Siemens S7-300 • Control system drives Elau Schneider PacDrive 3 • Error messages indicate no com ...

• Width of belt conveyor 100 mm • Length of belt conveyor 1170 mm • Height of stand 1300 mm, height can be adjusted • Inclination of conveyor adjustable • Drive 400V/0.7A/50Hz/0.25kW

BWT Carbon filter system 2016, Carbon filter system, consists of two carbon filter vessels, with Advanced UV disinfection unit, Testomat 2000 inline measurement device for analyzing water and pumps all mounted on stainless skid

BWT Septron Line61 VAL DI Water system 2016, Capacity 2.5M3/H, with conductivity of 0.06hs/cm, professional grade facility equipment designed for highly efficient wastewater treatment, 6.5Kw, See plate for further spec, two in stock

BWT LOOPO WFI store and distribution system 2016, 30Kw, store and distribution WFI at ambient temperature, Siemens HMI control, mounted on stainless skid, with stainless storage tank

Pierre Guerin CIP System 2016, Fully automatic CIP systems, pharmaceutical grade, with two stainless tanks and two Inoxpa pumps, mounted on stainless skid, two in stock

Pierre Guerin 3000L Fermentation system 2016, Fermentation system 3000L, system creates a small batch in vessel before transferring to main vessel, ask for further spec

GEA Westfalia CSE8006477 Separator 2016, Pharmaceutical grade, Never been used in production, self cleaning disk stack centrifuge, specially designed for liquid solid separation, max bowl speed 7250mm, 22Kw WEG motor, Siemens HMI touch screen controls, comes with ceiling mounted beam with electric rope hoist used for maintenance, 3Ph

Suncombe CIP System 2007, Stainless, pharmaceutical grade, CIP cleaning system, Siemens HMI controls, with 800L stainless vessel and pumps mounted on skid, full capacity 945L

GEA Westfalia CSC2006476 Separator Serial: 1720021 2002, Pharmaceutical grade separator, high performance disc separator distinguished by its self discharging function, this machine is ideal for applications requiring efficient separation of solids from liquids, 11Kw Loher motor, with Siemens controls, less than 5000 hours on the clock, comes with ceiling mounted beam with electric rope hoist used for maintenance, 3Ph

Carl Padberg GZ651 Centrifuge 130L, max 1200 U per min, 650mm diameter, 3Ph

Steris Finn Aqua 200-S3 Multiple effect water still 1999, 2.7Kw, with 200L stainless tank, used in pharmaceutical industry

We sell here our used Capsugel Cap 8 semi-automatic including vacuum pump and transformer, so everything you need for production. The machine is sold with two capsule rings each for size 0 and 00. The machine can also be viewed on site. Since this is also fully functional, it can be presented and demonstrated on site. Shipping within Germany can be made by our forwarding agent. The costs for this can be requested and invoiced separately. Self-collection is also possible. Shipping abroad must be handled by you.

• For wet grinding and dispersion of solids in low-viscosity to highly viscous media • Vertical design • Central grinding gap adjustment • Parts in contact with the product made of stainless steel 1.4435/AISI 316 L • Grinding disc diameter 95 mm • Capacity approx. 10-160 kg/h • Product fineness 40-200 ym • Permissible overpressure 6 bar • Max. operating temperature 80°C • Elastomers FPM • Water-cooled working area • Double-acting mechanical seal with sealing pressure station • 50 l feed hopper with agitator • ATEX Ex II 2 (Zone 1) G, Ex e II (200°C) T3, in accordance with the regulations of the year of manufacture 2008 • Drive 5.5 kW/3,000 rpm, 400 V/50 Hz • Mobile

• Cycled • Max. output 165 folding cartons/min, depending on format/product • 4 folding carton chains • Format range for folding cartons W 30\endash 100, H 12\endash 100, L 65\endash 150 mm • For offset tabs on both sides • Brochure folding and inserting machine GUK Cartonac 91 from magazine • Brochure dimensions unfolded W 90-210, L 68-320 mm, folded W 90-210, L 18-40 mm • Colour embossing unit on both sides • No special product feed • HMI with IPC • Servo controller Elau Pacdrive MC-4 • Drive 400V/50Hz The buyer shall bear the costs of delivery and loading.

• Cycled • Max. output 165 folding cartons/min, depending on format/product • 4 folding carton chains • Format range for folding cartons W 30\endash 100, H 12\endash 100, L 65\endash 150 mm • For offset tabs on both sides • Brochure folding and inserting machine GUK Cartonac 91 from magazine • Brochure dimensions unfolded W 90-210, L 68-320 mm, folded W 90-210, L 18-40 mm • Colour embossing unit on both sides • No special product feed • Bad product ejection with ejection countercheck • HMI with IPC • Servo controller Elau Pacdrive MC-4 • Drive 400V/50Hz The buyer shall bear the costs of delivery and loading.

• Suitable for hard gelatine capsules • Pipette principle • Powder dosing • Capacity max. 40,000 capsules/h • Suitable for capsule sizes 000 - 5, depending on change parts • With change parts for capsule sizes 00/0 • Without hoover • PLC Omron CPM1A-40K • Drive 400V/50Hz/200kA

• Suitable for hard gelatine capsules • Pipette principle • Powder dosing • Capacity max. 40,000 capsules/h • Suitable for capsule sizes 000 - 5, depending on change parts • With change parts for capsule sizes 00 and 0 • Without vacuum pump and hoover (can be provided on request at extra cost) • PLC Omron CPM1A-40CDT1-D-V1 • Drive 400V/50Hz

• Suitable for drying and granulation (intended for preparations for in vitro diagnostic use) • Batch operation • Peristaltic pump for spray liquid • Top spray nozzle for spray liquid • Scales • Product container volume 24 L • Batch volume max. 16 L • Batch weight 1-8 kg (depending on product) • Product suction lance from Müller barrel • Conical transition piece for emptying into Müller barrel • Heating register • Star filter for separating product and air flow • Inflatable seals • Product temperature max. 85°C • Explosion-proof container • Max. explosion pressure 10 bar • ATEX Zone 20 inside the mixer (according to conditions in 2010) • Equipment category 1 according to Directive 94/9/EC • Equipment group II, D (dust) • Protection class IP 5x • Max. surface temperature 180°C • Operator terminal MP 277 Touch • Process data acquisition with ...

• For dry mixing of powder and granulate • Gross volume 50 l • Useful volume 15-35 l • Main drive 3 kW • Mixing shaft speed 40-230 rpm • Knife head with 3 knives • Knife head drive 2.2 kW • Knife head speed 3000 rpm • Air gap seals for mixing shaft and knife head • Thermometer set PT 100 • ATEX Zone 20 inside the mixer, Zone 22 outside the mixer (according to conditions in 2010) • Device category 1 inside the mixer, 3 outside the mixer, in accordance with Directive 94/9/EC • Device group II, D (dust) • Protection class IP 5x • Max. surface temperature 135°C • MP 277 Touch operating terminal • SPS Siemens S7-300 • Windows CE operating system • 1 filter connection • 2 Müller barrels 30 l, 1 Müller barrel 20 l • Various spare parts (filters, seals, etc.) • Mobile on 4 castors • Drive 400 V/50 Hz/9 kW/22 A • Only 190 operating hours Has wo ...

Vibrating Screening Machine Manufacturer: Allgaier Type VRS 600/1 1-decker for screening in 2 fractions Year of manufacture 2018 as good as new condition Screening area 0.28 m²/deck Motor 0.525 kW/ 230/400 V/50 Hz, IP 66 Surfaces in contact with the product in stainless steel, material 1.4301 or 1.4307 Surfaces inside and outside glass bead blasted Description of screening machine: Modular system Robust closure by means of clamping screws Viewing opening on the hood with neoprene lid Vibration damping via rubber elements

Distillation plant for WFI water or pure steam generation Manufacturer : DEWA Type: DP 30 EVS Technical specifications : Distillation or pure steam plant this system can be used to produce either distillate or pure steam. Production 30 litres/h Feed water consumption 35 l/h Cooling water consumption system at 95 °C Destwasser 200 l/h electric heating capacity 18 kW max. operating pressure 1.9 bar min. cooling water pressure 1.0 bar min. feed water pressure 1.0 bar min. pressure for control air 6.0 bar Total capacity evaporator approx. 27 litres Evaporator capacity at max. level approx. 11 litres Dimensions: Height 2240 mm Width 970 mm Depth 700 mm Empty weight 300 kg Documents: available

2000 litre process vessel Manufacturer: TSA Process Equipment WFI Containers NEW in original packaging Year of construction 2020 electro-polished Double-jacket, pressure-resistant Operating temperature product room 130 °C Operating temperature sheath 170 °C Accessories

• Belt width 315 mm • Belt, white • Radius of belt inside 135 mm / outside 450 mm • Height of belt approx. 820 mm, adjustable • Drive SEW SF 40 0.37 kW 240/400V variable speed gearbox 1:11.88

Water Distillation Plant Manufacturer Stilmas Type MS 10 4 S Serial No. 4285/90 Capacity 120 -220 lt/h Temperature 143-175 °C Steam 36-75 kg/h Pressure of 3-8 bar Documents available

Test chamber for stability tests Manufacturer: Vötsch Type VP 1300 Pharma Year of construction 2010 For investigations of the shelf life of medicines. The test systems of the VP series have been specially developed for the requirements of laboratories according to the ICH guidelines Test room volume: 1300 l Temperature test: +10 °C to +50 °C, +5 °C to 60 °C Climate test: +10 °C to 50 °C Nominal power 2.7 kW Humidity range: 20% to 90% RH Weight 250kg Documents available

Test chamber for stability tests Manufacturer: Vötsch Type VP 1300 Year of construction 2013 For investigations of the shelf life of medicines. The test systems of the VP series have been specially developed for the requirements of laboratories according to the ICH guidelines Test room volume: 1300 l Temperature test: +10 °C to +50 °C, +5 °C to 60 °C Climate test: +10 °C to 50 °C Nominal power 2.7 kW Humidity range: 20% to 90% RH Weight 250kg Documents available

Manufacturer: Uhlmann Model No.: UPS4 Year of Make: 2000 Serial Number: 460 Bottles Carton Packaging 2 bottle feeders PACCONTROL PCL Production capacity: • 15 to 50 cycles/min up to a punching depth of 12 mm • 15 to 40 cycles/min up to a punching depth of 28 mm Maximum feed length: 222 mm Format range: longitudinal 220mm x transverse 284mm Actual format: • Tray for 10ml ampoule (Ø17.5×87) and 10ml vial (Ø15×50), tray dimensions (LxWxH): 99x54x26 • Tray for five 10ml vials (Ø24×50), tray dimensions (LxWxH): 146x66x26 • Tray for a 10ml vial (Ø24×50), tray dimensions (LxWxH): 99x54x26 Thermoforming film diameter: • On the machine : 400mm • On bobbin holder : 800mm

Inline Homogenizer Manufacturer Koruma Type DIL 160 Power 22 kW

Plug valve, pharmaceutical version Manufacturer: Visval AG Type SoliValve 100 Year of construction August 2018 Suitable for the powder transfer industry. It allows the transfer and dosing of powder under the best containment conditions. It is suitable for operation within OEB5. Fully automatic and closed separation of solids in bags, bottles, drums (1L to 700L). The opening is controlled by a high-precision stepper motor and a backlash-free ball screw, which enables opening steps with an accuracy of up to 0.1 mm.