extruders used for sale

Key data: 35 mm, 25 , 103 U/min

Used extruder 35mm - 25 l/d with 5.6 kW drive 3-zone auger 3 heating/cooling zones on the cylinder + 1 tool zone Mass pressure sensor 500 bar All machine cables designed to be plugged in Control cabinet with main switch, motor controller, mass pressure indicator and 4 pieces of temperature controller Function-tested

Key data: 30 mm, 28 , 110 U/min

Used Filament Line Single Screw Extruder 30mm 28L/D 2 meter water bath Trigger AB50 Winder W250 Machines from PMH GmbH

CDM PREALPINA 500-600 kg/h, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam. 35L/D, a.c. 283 kw drive, Constructed in 2013, crammed feeding unit, extruder 130 mm., one degassing pump 5,5 kw, fully-automatic screen changer FIMIC RAS 400, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine offered reconditioned, installed power - used power in work: about 60-65% : 435, availability: Subject to unsold, conditions: Totally reconditioned, options available: Fimic or non stop screencganger + buffer silo or loading screw+hopper, used power in work: 280 kw, cooling: 13.400 Kcal/h, MATERIALS: PE PP PC PS ABS EPS XPS EPP, delivery time: 30 days ca

This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GAMMAMECCANICA TANDEM SYSTEM 125 mm., Throughput rate up to 600-950 kg/h ca, depending on material and feeding rate (0,30-0,40 Kwh/kg), This is an extrusion line suitable to handle heavily printed or contaminated or high humidity film and rigid plastics, Including, Loading conveyor belt, tunnel metal detector, automatic compactor, N.2 Dosing unit for masterbatches and more, 1st extruder with 125 mm. screw Ø 22 L/D, 1st degassing point, FIMIC RAS aumatic screenchanger, control cabimet, 2nd extruder with 125 mm. screw Ø 22 L/D, 2nd degassing point, BD-PLAST non-stop screenchanger, TDA6 GM water ring pelletizer, heat exchanging unit, vibrating screen, blower, Water treatment unit , mechanical type, with non woven filtering, Electric cabinet sfor complete management of the line, The line is in excellent conditions wirth very few worked hours, Can be tested in Italy on appointment, [Constru ...

GAMMA MECCANICA GM 125 COMPAC, Extrusion line with pre-compactor, Nominal throughput rate up to 900 kg/h depending on the type of material and feeding rate, The line includes:, Loading belt, tunnel metal detector, compactor with dosing unit, extruder with 125 mm screw diameter, 35 L/D, semi-automatic, non stop hydraulic screenchanger, oleo-dynamic pack, water ring pelletizer, drying centrifuge, recycling water tank, vibrating screen, electric cabinet for the complete management of the line, The line is offered totally reconditioned with 99% performances of a brand new one at less than half its price., conditions: reconditioned, type: 800 kg/h compact type extruder

FIMIC RAS 325 SCRAPER, fully automatic screenchanger, screening surface 77.900 mm², Throughput: up to 600 kg/h depending on material and contamination, with scraping system, suitable for extrusion lines with capacity up to ca 500 kg/h or more depending on screening, Just disconnected, excellent conditions, constructed in 2017, immediately available, We can supply spare screens for this machine at competitive prices., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, availability: immediate, type: fully automatic

This KUHNE KS45-24D compounding extruder was manufactured in 2006. Ideal for processing a variety of materials, it offers robust construction and reliable performance. Consider the opportunity to buy this KUHNE KS45-24D compounding extruder. Contact us for more information.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GALA UNDERWATER PELLETIZER, Type SLC 6, Polymer diverter-valve with hydraulic-pack, die-plate 24 x Ø 3,2 mm ( 5° ), 6-arm knife-holder, By-Pass-System, GALA TWS water-box, heating power 12 kW installed, Water-pump 5,5 kW, GALA Spin-dryer 16,2 BF with 4 kW, Blower 1,1 kW, Siemens Control Cabinet Xantex ( MAAG )

COUMPOUNDING LINE type AD-S 75, - Including twin screw extruder with 2x72 mm co-rotating parallel segmented screws L/D 48, - screws design can be chosen, - Max screw speed up to 600 rpm., - 250 kw a.c.drive, - n.3 venting points, 1 with 3,0 kw vacuum pump, including condensate collector, - 2x side feeders type ZSB (twin screw) 1 x 0,62 mm. each one a.c.3,0 kw drive, including hopper loader with internal stirring unit ( for anti-bridging of additives / fillers as powders, fibers, … ), - Water cooling/tempering unit for cylinder-barrels,, - incl. tank, Temperature-sensor, circulation-pump and heat-exchanger, - semi-automatic, non-stop 2-piston screenhanger, - hydraulic unit, - Siemens PLC with touch screen (EN+DE) and ABB main control board., installed power - used power in work: about 60-65% : 250, availability: 2 months ca, options available: strand OR water ring OR underwater pelle ...

COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, spare : 2 screws and 1 barrel reconditioned to 100% performances, Mounted: screws + barrel in very good conditions, n.1 dosing unit with hopper, N.1 vacuum degassing pump, d.c.132 kw Siemens main drive 400V 50 Hz, non-stop hydraulic screen-changer with 90 mm screens (available with fully automatic screenchanger, on request), hydraulic pack, fitted with strand die (available with water ring pelletizer on request) + stainless steel cooling bath with heat exchanging unit + air-blowing dryer, electric cabinet with air conditioning (for extruder, screen-changer, hydraulic pack), pelletizer for strands, TVV Cooling column for granule., constructed i n 2001, The line is offered totally reconditioned (photos show the machine during reconditioning), installed power - used power in work: about 60-65% : 132 ...

COPERION TWIN SCREW COMPOUNDER, Extruder with 2 x 65 mm. 40 L/D parallel co-rotating screws, 2x side-feeders, 90 kW a,c, drive, vacuum degassing pump, fitted with aa strand pelletizer (can be fitted with a water ring or an underwater pelletizeer), Control-board

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)

COPERION TWIN SCREW COMPOUNDER, Extruder with 2 x 75 mm. 40 L/D parallel co-rotating screws, 2x side-feeders, 132 kW a,c, drive, vacuum degassing pump, fitted with aa strand-pelletizing equipment (can be fitted with a water ring or an underwater pelletizeer), Control cabinet, installed power - used power in work: about 60-65% : 132 kw, options available: water ring OR underwater pelletizer, conditions: reconditioned, type: compunder

This Leistritz ZSE 50 GL-36D twin screw extruder was manufactured in 1995. It features a screw diameter of 50 mm and an L/D ratio of 36:1, ideal for precise extrusion processes. Consider the opportunity to buy this Leistritz ZSE 50 GL-36D twin screw extruder. Contact us for more information.

This Coperion STS35 twin screw extruder was manufactured in 2006. It features an effective power rating of 57 kW, with input and output speeds of 1500 min^-1 and 900 min^-1 respectively. The machine offers a gear ratio of 1.59 and weighs 365 kg. Consider the opportunity to buy this Coperion STS35 twin screw extruder. Contact us for more information.

PALLMANN AGGLOMERATOR PS 4-7, 5 F3/GS3, Rotor Diameter 400 mm, Infeed 400 x 750 mm (WxH), Rotor Length 750 mm, n.3 still knives, n.5 Rotating knives 5, granulator, Conveyor belt, Metal detector, vent, Electrical panel, Installed Power 75Kw, Constructed in 2014, offered checked and reconditioned, installed power - used power in work: about 60-65% : 75, availability: 1 month ca, conditions: reconditioned

PALLMANN AGGLOMERATOR PFV 250, Throughput rate depends on material, 180- 600 kg/h - 250 lt, The supply includes :, AGGLOMERATOR PFV 250, 75 kW Motor power, electric cabinet, Moisture extraction via internal spindle, Rotary knives, 5 kW, option: 4-blade external rotor, HOT MELT GRANULATOR, rotating knives, 30 kw drive, 500x400 mm, 10mm grid with housing cooling, 2 Big Bag stations with pneumatic valve, water cooling system :, Water Requirement: 700-1100 l/h, 1000 worked hours, Option: with fine dust extraction, constructed in 2017, offered checked and reconditioned, installed power - used power in work: about 60-65% : 110, availability: ca.1 month, conditions: reconditioned, type: agglomerator

EREMA INTAREMA 906 TE ECO SAVE, constructed in 2017, including:, loading conveyor belt, metal detector, agglomerator, Brabender dosing system, extruder with 65 mm Ø screw, double degassing system, Back-flush EREMA hydraulic screenchanger, water ring pelletizer, big bag double filling station, Present production rate : LDPE 220 – 240 kg/h – HDPE 180 – 200 kg/h, The line is connected and can be tested

This Leistritz ZSE 50 HP-40D twin screw extruder from 2004 has a screw diameter of 50 mm and a robust torque output of approximately 1572 Nm. It is optimized for pharmaceutical and high-throughput compounding applications. The machine offers a throughput capacity of around 200 kg/h at a maximum screw speed of 500 rpm, powered by a 65 kW drive. Featuring a high specific torque density (~15 Nm/cm³) and an OD/ID ratio of ~1.66, it delivers excellent throughput and torque balance. Consider the opportunity to acquire this high-performance twin screw extruder. Contact us for more information.

ERMAFA AGGLOMERATOR, SPS-System: Siemens S5 – 95U, Average throughput rate:, LDPE: 500kg, OPP: 300-400kg, TPO: 300-400kg, Including:, buffer silo with automatic filling of the agglomerating chamber through pneumatic system, automatic discharging of agglomerated material, Agglomerator, 355 kw drive, Control system, Control cabinet, Extraction system/filter, Classifier, small conveyor belt, Spare parts available:, 1x knife shaft, 35 knifes, Other spare parts need to be produced., Constructed in 1993, used by Constructor for test purposes until 2006, The machine has been working until 3rd quater 24, then disconnected in Feb 25 (after video), installed power - used power in work: about 60-65% : 355, availability: immediate, capacity: 300-500 kg/h depending on materiale and feeding rate, conditions: good working conditions

GAMMA MECCANICA EXTRUDER 160 mm, nominal throughput rate 1 Tonìh, for PE PP PS PC ABS, type GM 160, barrel with screw diam. 160 mm. 36 L/D, double degassing system, semi-automatic non-stop screenchanger, water ring pelletizer, centrigfugal dryer, Constructed in 1997, immediately available, availability: immediate, capacity: 1 Ton/h, conditions: some reconditioning needed, type: 160

This Coperion ZSK 50 MCC+ twin screw extruder was manufactured in 2010. It features a screw diameter of 50 mm, an L/D ratio of 40:1, and a motor power of 215 kW. With a maximum screw speed of 1,200 rpm and an output capacity of up to 800 kg/h, it is ideal for compounding, masterbatch production and recycling applications. Consider the opportunity to buy this Coperion ZSK 50 MCC+ twin screw extruder. Contact us for more information.

This Leistritz ZSE 60MAXX-44D was manufactured in 2007. A twin screw extruder with a screw diameter of 61.6 mm and a high torque capacity of up to 3750 Nm, it offers up to 50% higher throughput potential than earlier models. Ideal for applications in plastics compounding and pharmaceutical extrusion. Consider the opportunity to buy this Leistriz ZSE 60MAXX-44D twin screw extruder. Contact us for more information about this machine.

BANDERA BLOWN FILM EXTRUDER, for tube film, barrel with screw diam.90 mm., die diam.250 mm., Original Bandera die head, now just reconditioned (not the one in photo), Corona treatment, single color priniìting unit (small for marks), a.c. drive with inverter, single winder 1.200 mm, wide, electric cabinet for complete management, tower included, availability: immediate, working width: 1200, conditions: good, type: s.90 d.250 sw 1.200 mm.

CINCINNATI CMT 35 APC, twin conical screw extruder, 2x35 mm screws, Control panel, 7,1 kw drive, 57.000 working hours, installed power - used power in work: about 60-65% : 7,1, type: PVC

PRT RECYCLING EXTRUDER for PE PP PC PS ABS, Extruder with 85 mm screw, 30 L/D, Constructed in year 2000 - very few hours of work, NEW Crammed feeder new 2023 FF85VE, 60 kw Siemens drive 2.200 rpm, Average throughput rate 200 kg/h, depending on materials and feeding rate, Total heaters power 38,6 kw, N.1 vacuum degassing pump, Manual screenchanger, NEW 2023 Water ring pelletizer WF150, Drying centrifuge, Total installed power cutting group 14 kw, Vibro classifier, Total weight about 3 Tonnes, excellent conditions, MATERIALS: PE PP PC PS ABS PS, capacity: ca.200 kg/h depending on materials and feeding rate, availability: ready-to-go