gluespreader machines used for sale

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Example offer direct postforming machine Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge  ...

PUR gluing Brand: GP Service Type: EASY PUR general description - PUR adhesive unit with integrated pre-melt container for a permanent zero joint - greatly reduced maintenance and cleaning costs due to PTFE coating of all assemblies (except glue roller) - suitable for flexible production capacities - order in synchronism adaptable to all common machine manufacturers: - Can be mounted directly on HOMAG machines - also in alternation with original glueing unit! - Stefani with adapter - Biesse with tag - others on request Application height 60 mm, higher on request Feed up to 30 m / min, higher on request low order quantities (

Contour edge banding & trimming machine Make: VITAP Type: SMART-3 New machine - With swivable trimming station - For straight and formed workpieces (convex and concave) - 1 glue spreading roller for 10-60 mm panel thickness - Guillotine to cut bands up to 3 mm thickness - edge 0,5-3mm 2 tape feeding speed (3 m/min or 7 m/min) -Glue pot 1kg capacity - Tape plate Ø=520mm Solid Phenolic table - Easy to clean - With no heat transmission - Electronic temperature control - Foot pedal command for the guillotine Tilting trimming unit - with 1 high frequency motor HP 0.75 (kw0,55) - 1 cutter Head with 2 knives r1mm/r2mm/r3mm - Support tape plate Ø 600 mm - Semi-automatic end-cutter with motor 0,5 kw and blade Ø=125 mm - Working table 400 x 300 mm. - CE standards. Optional available for an extra charge: - Cutter (without knives) - Set ...

Key data: 2 mm, 25 mm, 2040 mm

- Blowers with electronic temperature control from 20°C to 450°C - Combi-milling unit - Adjustment wheel for inlet stop adjustment - Cross-cut unit for 90° edge cuts - Constant feed rate of 5 m/min. - 3 edge pressure rollers - Panel thickness adjustment via handwheel The sale is in the condition as it is, excluding warranty, from our warehouse in Düsseldorf. Prior sale is reserved.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor-Manufacturer: Perske, milling motor electric motor spindle motor type KS 81.25-2 D-Power: 15 kW-Speed: 4360 rpm-Voltage: 400 V / 75 Hz-Mounting shaft: Ø 50 x 325 mm-Protection class: IP54-Number: 3x motor available-Price: per piece-Dimensions: 915/290/H180 mm-Weight: 81 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor-Manufacturer: Perske, milling motor type KCS 70.12-2 D-Power: 5.0 kW 5860 rpm-Voltage: 400 V / 100 Hz-Mounting shaft: Ø 40 x 80 mm-Number: 4x motor available-Price: per piece-Dimensions: 480/232/H150 mm-Weight: 34 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor-Manufacturer: Perske, milling motor type KCS 71.14-2 D-Power: 4.4 kW 2820 rpm-Voltage: 400 V / 50 Hz-Mounting shaft: Ø 30 x 40 mm / M30 x 3,5-Number: 2x motor available-Price: per piece-Dimensions: 515/230/H150 mm-Weight: 37 kg/piece

Code: 0186 Brand: BIESSE ARTECH Model: AKRON 420 - CE Standard Automatic edgebander for wood, Pvc, Abs, and melamine edges for carpentry, furniture, kitchens, custom-made furnishings, panels and various - CE Standard Technical data: Panel height 10-60 mm Min/max edge thickness 0,4-6 mm Minimum panel length 140 mm Minimum panel width 50 mm Track feed speed 12 mt/min Protective cabin Composition: Gluing unit: Glue tank capacity 2 kg - Shear for 3 mm roll edges End tcutting unit: n° 2 independent high-frequency motors 0,5 Kw - Inclination from 0 to 15° Tilting fine finishing unit: 2 independent high-frequency motors 0,65 Kw , tiltable from 0 to 25° Brush unit: Brush diameter mm 150 - Motors Kw 0,37 each Suction port diameter mm 150 Compressed air 7 bar Overall dimensions mm 3200 x 1000 x 1500 h Weight kg 900

Code: 0185 Brand: VITAP Model: QUARTZ 3 - CE Standard Automatic edge bander for wood, Pvc, Abs and melamine edges for carpentry, furniture, kitchens, custom-made furnishings, panels and various - CE Standard - Year 2015 Technical data: Panel height mm 10-50 Edge thickness mm 3 Minimum panel length mm 140 Track feed speed mt/min 7 Composition: Gluing unit: Glue tank capacity kg 1 - Power consumption Kw 3,5 End cutting unit: Blade rotation speed rpm 12000 - Power consumption Kw 0,7 - Tools mm 80x2 F32 Trimming unit: Blade rotation speed 12000 rpm - Cutter diameter 68 mm Z6 R=2 - SIKO display adjustment Protective cabin Panel support Suction ports n° 2 diameter 60 mm - n° 2 diameter 40 mm Max installed power 5 Kw Compressed air 6 bar Overall dimensions mm 2100 x 800 x 1500 Weight kg 400

Used machine, up to 3 mm edge thickness with leash application to the edge, Roll separation pneum., hold-down for the workpieces, driven feed roller.

Used machine thin edge, strong edge, solid wood Bonding system: EVA, PUR Joining milling, multifunctional unit, Feed rate8-18 m/min, max. panel thickness 60 mm 2600 kg

Wood Her STREAMER 1057 XL FU + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for setting the units Fully automatic edge magazine for roll and strip goods Glue application station GLU-JET cartridges + PU gluing Adhesive application using nozzle technology Scanning nozzle Workpiece height 6-60 mm car. Glue height adjustment High-quality 3-roll printing unit, 1st roll motorized Cross-cut unit pneum. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° Corner copy unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper carriers Surface Scraper Unit - Finish Buffing unit - cleaning set + spray device in the spout Spraying Device - PU Machine with all machining tools Machine is WORKSHOP TESTED - AS ...

Working height 900mmNominal width 1400mmEffective working width 1370mmRolling pressure force max 5kNPassage height max 120mmFeed transport 6-50 m/min stepless/frequency controlledPlate width min 200mmPlate length min 350mmPanel thickness min 3mmGlue hot melt PURApplication rate 40-80g/mDriving power 6kWTempering device 24kW

A 2-roller Höfer glue spreader is available. Working width: 800mm, rollers: 2. On-site inspection is possible.

Edge thickness: maximum 20mm; Workpiece thickness: from 8mm - 60mm; Workpiece width: minimum 60mm; Leimangabe: cartridge; Cross-cut scissors: yes; Milling Station 1: Flush; Infeed ruler adjustment: manual; Workpiece thickness adjustment: manual; Power consumption: 7kW; Machine length: 2.8m; Machine width: 1.2m; Weight: 800kg;

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; plastic edges: 0,4 - 3 mm; solid wood edges: 0,5 - 5 mm; Workpiece thickness: 8 - 50 mm; Minimum length of workpiece: 120 mm; Min. work piece width: 110 mm; Anti-adhesive spraying unit: yes; Edge preheating device: yes / with ceramic infrared lamp; Bonding unit: granulat / Glue container quick-change kit; Jack knife: yes; Flush trimming unit: yes; Corner copy unit: yes; Flush radius milling unit: yes; Radius scraper unit: yes; Area scraper unit: yes; Buffing unit: yes; Cleaning spray unit: yes; motor power: 5 kW; machine length: 3774mm; machine width: 1546 mm; machine height: 1337mm; weight: 842 kg; Top equipment for high productivity with low space requirements!Intuitive operation with the eye-S control and 10 large touchscreen:- HMI Maestro Active Edge- Graphic display of all processing units an ...

Machine heated inlet ruler, hot melt adhesive specification, roll separation, pressure zone, cross-cut saw twin-motor, Combination milling machine radius/chamfer, buffing unit.

: 3 mmWorkingpiece thickness from to: 6-45 mm mmTotal length: 3250 mmFeed speed: 8 m/min.total power requirement: kwWeight: 700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Glue Applying Machine Drill With disc roller conveyor Type SL 70 F Year of manufacture 1996 2 rollers glue application machine With disc roller conveyor Working width 700 mm Fluted application rollers Rubber lining in good condition Passage height approx. 80 mm

Digital display, Fabr. ECO PLUS, with extraction connections

Length 5030 mm -Depth 1020 mm -Height 1200 mm -Banding station 0.3-13 mm -Banding height max. 51 mm -Workpiece thickness 6-45 mm -Feed rate 13m/min. -Electrical connected load 8 kW -Extraction nozzle D=140 mm - with edge feed 1901 fully automatic - With glue application station 1906 cartridge -Printed work 1914 -Cross-cut unit 1976 -Milling unit 1943 for Buende milling cutter up to 13 mm and chamfer milling cutter -Milling unit 1943 to radius milling machine -Scraper unit 1927 -Buffing unit 1944 The machine is still in operation

9 Aggr. Feed rate 20 m/min The machine is still in use

Kappsaege buendingfraesen Scraper blades Wobble

Electric pneumatic edge press Haug HFK 2200 for pressing edge material on wood with heating. Incl. 3 table extensions Swivel worktable, Working size max. approx.: 1,400 x 2,500mm, heater: 1,7 kW

Key data: 22 mm, 60 mm

beautiful edge banding machine with joints Equipment: Join Glue on Clip Mill Radius Milling Radius Scraper Wing Scraper Wobble Overall length 6.6 m

Code: 0085 Brand: BIESSE ARTECH - ITALY Model: SINGLE - CE Standard Edgebander for straight and shaped panels with glue pot with automatic feed for edges in wood, pvc, abs, veneer, for furniture, kitchens, panels, joinery, custom-made furniture - CE Standard Technical data Panel height from mm 10 to 60 Edge thickness mm 0,4 - 3 Minimum radius mm 25 Feed speed from 4 to 16 mt/min Glue pot capacity approx 3 litres Motorised feed at variable speed mt/min 4/18 End cutting blade unit for cutting excess edge lengths Tilting table Telescopic support roller conveyor for supporting large panels Compressed air 6 bar Total power consumption Kw 5,2 Overall dimensions mm 1700 x 900 x 1500 h Weight kg 350 Top/bottom trimmer Speedy Panel height mm 10/60 Absorbed power Kw 1,5 Compressed air 6 bar Overall dimensions mm 900 x 750 x 1150 h Weight kg 10