Edge gluing machines used for sale (40)

PART NUMBER 8010 SPECIFICATIONS Equipment: - plate - Pre-milling - Tape feeder - 2 glue tanks: for granules and for cartridges - currently there is hot melt glue (granulate) in the machine - guillotine – pre-cutting of the veneer - 3 pressure rollers - 2 ball cutting units - 2 milling units for edge shaping (radial milling cutters) - corner earning aggregate - scraping aggregates – for removing excess glue - Polishing units - infinitely variable feed speed adjustment 8-18m/min - element thickness 6-45mm - min workpiece length 180mm - min workpiece width 600m - max thickness of veneer fed from the roll 3mm - air demand 6-8 bar - Diameter of the extraction port 7x80mm,1x130mm - dimensions l/w/h 6650x1260x1700mm - weight 1850kg ADVANTAGES – German production – spray system – pre-milling and corner making – 2 glue tanks - Smooth feed 8-18mm  ...

• Edgebander, edge banding machine • Edge thickness from 0,40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Minimum workpiece lenght 140 mm • Minimum workpiece width 60 mm • Adjustable feed speed from 8 m/min up to 20 m/min • Feed motor 4,40 KW • HOLZ-HER 1961 joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for 1 edge coil, edge magazine for 1 edge coil • HOLZ-HER 1907 cartridge glue system with pot for granulated hot melt adhesive • HOLZ-HER 1926 K pressure group with (1+2) rollers • HOLZ-HER 1819 snipping unit, 2 x motor 0,45 KW-12000 rpm • HOLZ-HER 1962 rough trimming unit, 2 x motor 2 KW-12000 rpm • HOLZ-HER 1934 lower profile trimming unit, 2 x motor 0,45 KW-12000 • HOLZ-HER 1933 upper profile trimming unit, 2 x motor 0,45 KW-12000 • HOLZ-HER 1927 profile scraping unit • HOLZ-HER 1964 flat scraping unit • HOLZ-HER 1944 ed ...

Edge banding machine Brandt type KDF 890 Technical data: - Description: see machine photos

• Edgebander • Serial number 14589/9-810 • Total installed power approx, 9 KW • Edge thickness from 0,40 mm up to 8 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 0,75 KW • Control • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1913 pressure group with (1+2) rollers • HOLZ-HER 1976K end trimming unit, 2 x motor 0,22 KW-9000 rpm • HOLZ-HER 1942M fine trimming unit, 2 x motor 0,60 KW-9000 rpm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-47169-23

Edge banding machine Brandt type KDF 670 Technical data: - Inlet ruler: manually adjustable - Joining milling unit with 2 motors each 2.2 kW: both motors pneumatically controlled - Hot melt glue manga - Pressure zone: with 1 main pressure roller and 3 post-press rollers - Cross-cut unit with 2 motors each 0.35 kW: automatically adjustable via program from chamfer caps to straight caps - Edge milling unit with 2 motors each 0.55 kW: for flush milling, chamfer milling or radius milling with 4-way fixed point adjustment for side scanning - Groove milling unit: with horizontal shaft - Copy milling unit with 2 motors each 035 kW: with pneumatic control in and out - Profile scraper unit: with pneumatic input and output control - Flat-pulling blade unit - Buffing unit

- Strip edge thickness from 0.40 mm to 12 mm. - Thickness of the edge in roll from 0.40 mm to 3 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Variable feed rate. - IDM PC OFFICE control. - Entrance spindle moulder group. - Edge loader for slats and roll, edge tray for one roll. - Gluing unit with boiler for granulated hot melt adhesive, with prefuser. - Pressure group with (1+3) rollers. - Cross-cutting group. - Spoke profiling group. - Shape group with 2 motors. - Milling unit tiltable from 0° to 90°, 4 KW motor. - Radius scraper group. - Tail scraper group. - Group of cleaning brushes. - LEISTER hot air blower group. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-59

SCM edgebander model BASIC 1 : – useful panel thickness from 8 to 40 mm – forward speed 8 mt/min – overall dimensions about 1.7 x 0.7 x h=1.3 m Operating units: – gluing with hot-melt glue tank – loader and shearing for roll material – Trimmer KW 0.6 – Trimming machines KW 0.5+0.5 Machine operating at pick-up in trade-in, with track feed gearbox recently replaced. Not in accordance with CE regulations, but with a safety switch on the cabin opening.

- Total installed power approx. 20 KW. - Thickness of the edge in strips from 0.60 mm to 25 mm. - Thickness of the edge in roll from 0.30 mm to 3 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Minimum width of the piece 65 mm. - Adjustable feed speed from 8 m/min to 30 m/min. - 5.50 KW advance motor. - CNI PIC 200 control. - Input spindle moulder group, 2 x motors. - Edge loader for slats and roll, edge tray for one roll. - VC34 QMS gluing unit with tank for granulated hot melt adhesive, with prefuser. - Pressure group with (1+3) rollers. - Cross-cutting group, 2 x 0.33 KW-12000 rpm motor. - Straight roughing group, 2 x 1.03 KW-12000 rpm motor. - Spoke profiling unit, 2 x motor, tilting. - Shape group, 4 x 0.33 KW-12000 rpm motor. - Milling unit tiltable from 0° to 90°, motor from 2.20 KW-12000 rpm. - Radius scraper group. - Tail scraper group. - Cleaning br ...

Edge thickness 0.4 - 3 mm Workpiece thickness: max 50 mm Min workpiece length 150 mm Feedspeed 22 m/min

- Semi-automatic machine for the application of rubber edges with a \"T\" section on panels of different shapes and dimensions without the aid of counter-templates. - Retractable cutting device. - Applicator with vibration so as not to damage the edge surface. - Heater to facilitate application operation. - Retestador. - Total installed power 6.02 KW. - Thickness of the pieces from 10 mm to 30 mm. - Feed speed 5 m/min. - Table dimensions 1050 x 800 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-52

Undercarriage for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). But it certainly also fits on other machines, e.g. Brandt (might have to be adjusted a bit) Length of the U-profiles approx. 1130mm Body height incl. castors approx. 150mm 4 sturdy steel castors as swivel castors with grease fittings 2 Brakes 2 support plates for height compensation The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

- Edge thickness from 0.40 mm to 2 mm. - Thickness of the part from 10 mm to 45 mm. - Minimum piece width 90 mm. - Feed speed 6 m/min. - Retestador group. - Spoke profiling unit. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-21

SPECIFICATIONS: Workpiece thickness: min. 6 mm - max. 45 mm Edge thickness: max. 3 mm Feed: 8 m/min COMPOSIZIONE: Gruppo rettifica Gruppo colla Gruppo pressore Gruppo intestatore doppio Gruppo raschia colla Gruppo refilatore Gruppo arrotondatore Gruppo raschiabordo Gruppo spazzole

- Total installed power 7.26 KW. - Thickness of the workpiece from 10 mm to 60 mm. - Variable feed speed. - Control. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+2) rollers. - Cross-cutting group, 2 x motors - Shape group, 2 x motors. - Scraper group. - Group of cleaning brushes. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-3

IDM manual edgebanding machine for shapes model KOMPACT according to CE standards

- Total installed power 8.80 KW. - Edge thickness from 0.40 mm to 16 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Minimum length of the piece 140 mm. - Minimum width of the piece 60 mm. - Adjustable feed speed from 10 m/min to 20 m/min. - 1.50 KW advance motor. - Control. - Edge loader for slats and roll, edge tray for one roll. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+2) rollers. - Cross-cutting group, 2 x 0.50 KW-12000 rpm motor. - Spoke profiling group, 2 x motor at 12000 rpm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-6

AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 second hand machine with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various XILIA positioner system technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. electric press lift telescopic support for large panels soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit ...

• Edgebander • Serial number 515/0-007 (2000) • Edge thickness in strips up to 13 mm • Edge thickness in roll from 0,40 mm up to 5 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 1,50 KW • PLC control system • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1912 pressure group with (1+1) rollers • HOLZ-HER 1918 end trimming unit, 2 x motor 0,22 KW-9000 rpm, tilting up to 10° • HOLZ-HER 1942 M fine trimming unit, 2 x motor 0,60 KW-18000 rpm, tilting up to 15° • HOLZ-HER 1929 profile scraping unit • HOLZ-HER 1940 edge buffing unit, 2 x motor 0,12 KW-1340 rpm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are s ...

AUTOMATIC EDGE BANDER machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner technical data : min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin composition : gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge - n ...

- Total installed power approx. 35 KW. - Strip edge thickness up to 20 mm. - Thickness of the edge in roll from 0.40 mm to 3 mm. - Thickness of the workpiece from 12 mm to 60 mm. - Minimum length of the piece 85 mm. - Power Control PC 22, WOODCOMMANDER software. - Input spindle moulding group, 2 x 3 KW-9000 rpm motor. - Edge loader for slats and roll, edge tray for one roll. - MELER B4 EVA and PUR glue melting and applicator system, MELER STARBI touch control panel. - Pressure group with (1+6) rollers. - HOMAG HL 81 cross-cutting unit, 2 x 0.80 KW-12000 rpm motor. - Straight roughing group, 2 x 1.85 KW-12000 rpm motor. - HOMAG FK 13 L500 shape group, 2 x 0.40KW motor with tool change of 8 positions each. - HOMAG MN 21 spoke scraper unit. - Tail scraper group. - Cleaning brush group, 2 x 0.18 KW-1400 rpm motor. - Operating conditions of this machine: unchecked. - This it ...

Frama MDC 1300 roller glue applicator Working width 1300mm Working height 70mm Feed speed 16.5m/min 0.3kw feed motor CE Certified Year of production 1999 Weight 332kg

- Workpiece thickness from 10 mm to 40 mm. - Heater. - Manual retestator group. - Upper profiling group, 0.20 KW-12000 rpm motor. - New, unused machine. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-21

IDM edgebander model ACTIVA GP-R2: – MAGELIS electronic control with video – usable panel thickness from 10 to 60 mm – thickness of edges in rolls from 0.4 to 3 mm – Thickness of solid edges up to 12 mm – 2 feed speeds 12-18 mt/min – upper presser with wheels – motorized adjustment of the upper presser – machine according to CE regulations, year 2004 Operating units: – grinding unit with 2 motors – anti-adhesive unit, with nozzles for liquid – IR lamp for panel preheating – gluing unit with glue tank and upper pre-melter (3 interchangeable glue tanks are supplied) – double tilting trimmers – tilting trimmers – 2-motor rounding unit – PVC/ABS edge scraper unit – glue scraper unit – brush unit

- Edge thickness from 0.40 mm to 5 mm. - Thickness of the part from 8 mm to 45 mm. - Minimum length of the piece 120 mm. - Minimum width of the piece 75 mm. - Feed speed 10 m/min. - 0.75 KW feed motor. - Control. - Edge loader for slats and roll, the tray is MISSING. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+1) rollers. - Cross-cutting group, 1 x 0.20 KW-12000 rpm motor. - Spoke profiling unit, 2 x 0.55 KW-12000 rpm motor, tiltable up to 20°. - Cleaning brush group, 2 x 0.55 KW-2820 rpm motor. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-14

The machine is designed for automatic gluing of various types frames and profiles covered with foil, varnished or otherwise finished in the shape of rectangular or polygonal. The material of MDF frames glued together. The machine is dedicated to the production of picture frames and finishing frames in doors. Fully automatic work cycle. Max. slat size: -width 120 mm -height 65 mm -minimum element length 250 mm -capacity about 100 sets. Frames The device is suitable for hot melt adhesive. The dimensions of the device are 1100 x 850 x 1300 mm. Weight 160 kg Pneumatic system 6 bar.

- Edge loader for slats and roll, the tray is MISSING. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+2) rollers. - Cross-cutting group, 2 x 0.37 KW-12000 rpm motor. - Straight roughing group, 2 x 0.37 KW-12000 rpm motor. - Spoke scraper. - Cleaning brush group, 2 x motor. - Control. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-22

Edge banding machine Cehisa SYS 5PS - Only about 60 km edges glued / little used! - Condition tiptop - Sturdy construction all important aggregates available: - Infeed ruler - Joining milling - Preheat plate - Glue application - Apply edges (rolls or strip magazine) - Pneumatic pressure roller driven - Pressure roller on top, spring-loaded - Pressure roller at the bottom, spring-loaded - Caps front & rear - Flush milling top and bottom - Copy corners front and back -Scraper - Schwabbelscheibe Accessories: -Tool - Feed rollers for various edge materials - various spare blades - Settings folder Year of construction 2008 Masch. No. 532 The machine is approx. Available at the beginning of October (probably earlier) and would then have to be picked up on a fixed date. Disassembly and collection by buyers The machine is in top condition, ready for  ...

- Total installed power 8.20 KW. - Edge thickness from 0.40 mm to 3 mm. - Thickness of the piece from 10 mm to 50 mm. - Minimum length of the piece 120 mm. - Feed speed 11 m/min. - SIEMENS SMART LINE TOUCH control with touch screen. - Input spindle moulder group, 2 motors. - Edge loader, edge tray for one roll. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+1) rollers. - Cross-cutting group, 1 x 0.37 KW-12000 rpm motor. - Straight roughing group, 2 x 0.75 KW-12000 rpm motor. - Tail scraper group. - Cleaning brush group, 2 x 0.37 KW-1400 rpm motor. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-19

SCM edge bander model BASIC 1 : - useful thickness of the panel from 8 to 40 mm - feed speed 8 mt/min - overall dimensions approx. 1.7 x 0.7 x h = 1.3 mt Operating groups: - gluing with hot melt glue tank - loader and shearing for roll material - Header kW 0,6 - Trimmers kW 0,5+0,5

Important note: Machine needs a complete overhaul by technician before installation. Otherwise won't work. Equipment Type: Automatic edge banding machine for wood panels, continuous feed with electronic adjustments and multiple suction system. Manufacturer: CASADEI (SCM INDUSTRIA S.p.A.) Model: FLEXA 17 S Year: 2019 Serial Number: KK00002892 Technical description: The CASADEI FLEXA 17 S automatic banding machine is a machine designed for craftsmen and small and medium-sized companies, offering great ease of use without compromising on quality. Its robust frame and flexible units ensure excellent productivity and the possibility of carrying out any type of treatment on wood panels. Key features: • Panel thickness: 8 ÷ 50 mm • Band thickness: 0.4 ÷ 3 mm (5 mm opt.) • Edge thickness: 3 mm (5 mm opt.) • Feed speed: 7 m/min • Power supply: 400 V / 3 ph / 50 Hz • Installed po ...

Hebrock Edge gluing machine Edge glue Edge milling machine heating Capping

Technical data Machine Type: Edge banding machine Workpiece thickness: 10 - 50 mm Edge thickness: Commercially available veneer and plastic edges Feed speed: 3 - 4 m/min Electrical connection: 220 / 380 volts, 50 Hz Connected load: 3 kW Dimensions: 1750 x 800 x 1250 mm Weight: approx. 95 kg Configuration Heating capacity: 3 kW Temperature control: Infinitely electronically controlled Temperature range: 0 - 650 °C Auction-ID: A7-47274-43

Edge gluing machine

Holzmann KAM 55V Manual Lanten Glue Machine incl. Tools, Work Table, Vacuum Cleaners in Metal Box Clean, little-used condition Function untested Auction-ID: A1-47205-359

Edge glue machine HolzHer express 1437 Edge gluing, flush milling, caps flush milling with chamfer milling or RADIUS milling with sep. Aggregate Schwabelscheiben 2 mm and two units for chamfering or just milling milling ABS edge 2 additional units for RADIUS Hours of operation 1072.5 hours Masch. No. 721/9-203 L x W x H: 400 x 120 x 170 cm Weight approx. 900 kg Built in 1992 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

AMBITION 1650 FC EDITION – Edge Banding Machine General data: Model: Ambition 1650 FC Edition Year of manufacture: 2018 Serial number: 0-261-71-2179 Operating hours: 25189 h Condition: Very good, in working order Weight: approx. 3000 kg Dimensions (L x W x H): 2500 x 1555 x 2300 mm Description: Industrial edge banding machine designed for precise finishing of panel edges. The Ambition 1650 FC Edition ensures efficient and high-quality processing, making it suitable for demanding woodworking production environments. Additional information: For further technical data, please refer to the attached PDF file. Auction-ID: A7-40554-4

Machine is still in < operation and fully functional solid up to 20mm rolls PVC to 3 mm caps flush milling RADIUS milling milling Schwabbleln chamfer

EDGETEQ S380 – Edge Banding Machine General data: Model: EDGETEQ S380 Year of manufacture: 2021 Serial number: 0-261-73-9063 Operating hours: 17486 h Condition: Very good, in working order Weight: approx. 3000 kg Dimensions (L x W x H): 2500 x 1555 x 2300 mm Description: Industrial edge banding machine designed for precise finishing of panel edges. The EDGETEQ S380 is suitable for high-quality woodworking applications, ensuring efficient and accurate processing in production environments. Additional information: For further technical data, please refer to the attached PDF file. Auction-ID: A7-40554-3

Edge glue machine HolzHer express 1437 Glue, caps, flush milling, RADIUS milling / Beveling, scraping, cutting tool for rolling edges Total revision 10 years ago everything top Year of construction 1989 L x W x H: 500 x 120 x 170 cm Weight approx. 1800 kg The machine is in top shape, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Edgebanding machine for linear panels, serial number 10790970 Auction-ID: A7-46472-4