welding machines used for sale

plate thickness:15 mmtotal power requirement:13 A 9 KVAweight of the machine ca.:50 kgdimensions of the machine ca.:1000 x 400 x 650 mm

cutting range for steel to:20 mmtotal power requirement:3~ 220 / 380 Vweight of the machine ca.:100 kgdimensions of the machine ca.:500 x 750 x 1000 mm

cutting width:2500 mmNumbers of torche:2 Type of gas:Sauerstoff, Propan total power requirement:2 kWlength:6000 mmcontrol:KS 20 A Messer Griesheim Documents:vorhanden

table width:2300 mmtable length:7000 mmburner heads:1 Plasma -Schneidk. burner heads:2 autogene Schneidköpfe control:NBS 400 Documents:vorhanden

workpiece dia.: / mmmaterial: rust free/heat resistant steel: / welding process: 15-20 bolts /min at: / mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: 20 - 100 Acutting capacity: max. 35mm mmopen-circuit voltage: 250 VRequired air-pressure: min. 4 barconnected load: 20 KVAconnected load frequency: 400 Vweight: 0,7 kgDimensions (LxWxH): 1,0 x 0,6 x 0,8 mmPlasma cutting machine with cart- Includes 7m hose package- Spare nozzlesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: 30 - 100 Acutting capacity: max. 50mm mmopen-circuit voltage: 170 VRequired air-pressure: min. 4 barconnected load: kWconnected load frequency: 400 Vweight: 0,75 kgDimensions (LxWxH): 1,2 x 0,7 x 1,0 mmPlasma cutting machine with cart- 105 RTX torch- Includes 7m hose package- Spare nozzles- Like new, ready for immediate useThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Polen : 7850 €: 151.51 €: 35 to: 60 mm: 27 mm: 25x18 mm: 5 s: 13 mm: 700 bar: 379 mm: 148 mm: 335 mm: 20 kgMOBILE HYDRAULICS-POWERSTATIONDouble action - fully automated process of punching and returnWide range of hole diameters up to 27mmIntelligent control system with inching and automatic load detectionMode indicator lightProtection against accidental start-upOPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 2022 €: 1500 x 1000 mm: 272 kg: 100 mm: 12 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,1500 x 1000 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid stan ...

Introducing the TRUMPF TruFiber 1000, a high-quality single-mode fiber laser designed for precise welding, cutting, and metal processing applications. This 1,000 W laser system features an integrated cooling system, advanced safety control panel, and active power control for stable operation. Equipped with a TRUMPF PFO 33-2 TF HAL high-speed scanning head, it enables beam movement without physical motion, significantly reducing cycle times. The system includes CPX and intelligent optics, VisionLine Basic joint detection, and CalibrationLine Power auto beam power calibration. Also included is the Precitec LWM 4.0 weld monitoring system, complete with an IR sensor unit and modular laser safety cabin. Manufactured in July 2022, this equipment ensures high efficiency and reliability, ready for immediate deployment.

weight of the machine ca.:150 kgdimensions of the machine ca.:1200 x 600 x 800 mm

: neu : ca. 2 - 4 Wochen ab Auftr : 2590 €: 16 mmThe set for everyday and universal use with an extensive range of clamps, brackets and clamping options. Including tool trolley for an optimised and fast workflow.Consisting of:10 screw clamps 180° HIS16Z30004 screw clamps 45° HIS16Z30454 V-support HIS16VP1008 stop brackets 90x37, 5mm HIS16WA90378 pieces stop bracket 90x90mm HIS16WA90902 pieces stop bracket 300mm HIS16WA3001 piece stop bracket 500mm HIS16WA500L1 piece stop bracket 500mm HIS16WA500R4 pieces stop bar 75mm HIS16FA0758 pieces stop bar 115mm HIS16FA11528 pieces quick clamping bolt short HIS16SB1001 piece cleaning brush HIS16RB1 piece torch holder HIS16BH1 piece cleaner HIS- Cleaner-1L1 piece Anti-stick agent HIS-Premium-1LThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 995 €: 1200 x 800 mm: 150 kg: 16 mmTHIS MODEL IS DESIGNED FOR BEGINNERS AND FOR PROCESSING LIGHTER AND SMALLER WORKPIECES.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.2D standard welding and clamping table,1200 x 1200 with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid standard table legs with load capacity 1 tonne per leg, 500 kg per leg for castor modelThe data for this ad ...

length:1200 mmheight:800 mmweight of the machine ca.:150 kgdimensions of the machine ca.:1200 x 600 x 800 mm

Plasma cutting machine, plasma cutter, for plasma cutting system -Manufacturer: Hypertherm -Type: HySpeed HT2000LHF -Equipment: with hose package and cutting nozzle head -Max. cutting current: 200 A -Dimensions: 1100/720/H1040 mm Weight: 459 kg

: neu : ca. 2 - 4 Wochen ab Auftr : 5718 €: 4954 €: 2400 x 1200 mm: 850 mm: 8000 kg: 945 kg: 28 mmCLAMPING AND WELDING TABLE SETS INCL. 3M PACKAGEPOWERPACK PROMOTIONWHEN YOU PURCHASE A 28 MM OR 16 MM 3D OR 2D TABLE SYSTEM AND ONE OF THE THREE TOOL SETS, YOU WILL RECEIVE THIS 4-PIECE 3M PROMOTIONAL PACK WORTH € 607 FREE OF CHARGE:» one 3MTM SpeedglasTM G5-03 E welding mask, with welding filter G5-01/03NC, Natural Colour Technology» one 3MTM electric angle grinder, 1900W, variable speed, 125mm» a 3MTM Grinding &, Refining Kit , contains 125mm 787C fibre and PN-DH non-woven disc, with flat high-performance fibre disc backing pad and» one set of 3MTM CubitronTM 3 Fibre Disc 1182C, 125mm, XO-RD Disc and Fibre Disc Ribbed BUPSAMPLE:3D WELDING TABLE HISWELD HIS28V32412 Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes  ...

: neu : ca. 2 Wochen ab Auftragse : 5442 €: 105.03 €: 28 mmAccessory set consisting of:14 pcs. screw clamp180° HIS28Z30008 pcs. screw clamp45° HIS28Z30456 pcs. V-support HIS28VP10030 pcs. quick clamping bolt shortHIS28SB1006 pcs. connection bolt HIS28BS1004 pcs. mangnetic bolt HIS28MB1008 pcs. stop rail 150mm HIS28FA1508 pcs. stop rail 225mm HIS28FA2252 pcs. stop rail 500mm HIS28FA5006 pcs. stop angle 175mm HIS28WA1751 pc. stop angle 325mm HIS28WA325L1 pc. stop angle 325mm HIS28WA325R1 pc. support angle 600mm HIS28W600L1 pc. support angle 600mm HIS28W600R1 pc. support angle 800mm HIS28W800L1 pc. support angle 800mm HIS28W800R1 pc. cleaning brush Nylon HIS28RB1 pc. torch holder HIS28BH1 pc. tool cart HIS28WW1000and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 1725 €: 16 mmThe extended entry level with added value in the set configuration for the most common work steps and applications.Consisting of:8 screw clamps 180° HIS16Z30002 screw clamps 45° HIS16Z30452 V-support HIS16VP1004 stop brackets 90x37, 5mm HIS16WA90376 pieces stop bracket 90x90mm HIS16WA90902 pieces stop bracket 300mm HIS16WA3002 pieces stop bar 75mm HIS16FA0758 pieces stop bar 115mm HIS16FA11520 pieces quick clamping bolt short HIS16SB1001 piece cleaning brush HIS16RB1 piece torch holder HIS16BH1 piece cleaner HIS-Cleaner-1L1 piece anti-adhesive agent HIS-Premium-1LOPTION:Tool trolley HIS16WW1000 € 449,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for butt welding of serial parts Welding areas wire: Ø1-9 mm (steel < 0.25% C), Ø1-6 mm (steel > 0.25% C) Welding areas strip: 3 - 50 mm² Smallest thickness: 0.25 mm Largest width: 50 mm Instruction manual is provided. The machine has been cleaned, checked, it can be used immediately. The butt welding machine is in very good condition.

: neu : ca. 6-8 Wochen ab Auftrag : 1490 €: 1500 x 1000 mm: 850 mm: 344 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load capacity 50 ...

: neu : ca. 4 Wochen ab Auftragse : 3420 €: 2000 x 1000 mm: 850 mm: 8000 kg: 712 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (standard, height-adjustabl ...

: gebraucht : 2468D : prompt, Zwischenverkauf v : Deutschland : 2970 €: 1 : 1890 €: 195 kg: 28 mmDEMO SET / MINT CONDITIONconsisting of: 1x accessories car (Delivery is galvanised) 4x angle stop 350 x 20 mm 4x adjustable angle stop 250 x 20 mm 15x Adjustment clamp 4x Multi-clamp 6x Stand angle, adjustable 175 x 20 mm 2x Stand angle, adjustable 225 x 21 mm 8x Stop rail 225 x 20 mm 10x Socket bolt 15x Plug holder 3x Ball Tension Bolt 4x Claw clamping bolt 28 x 100 mm 15x Spacer ringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 3695 €: 2400 x 1200 mm: 482 kg: 200 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,2400 x 1200 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid standard ta ...

: neu : ca. 10 Wochen ab Auftrags : 4862 €: 3000 x 1500 mm: 755 kg: 200 mm: 12 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,3000 x 1500 x 200 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 200 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid stan ...

Welding Rotator SAF ROTOMATIC ST6W - No 1 Rotation: from 12 to 120 RPM Max Year of construction: 2012 Maxi loading capacity: 6 T Trainer dimensions: L 2100 mm x W 800 mm x H 400 mm Simple rotator dimensions: L 1900 mm x W 300 mm x H 400 mm Mini ferrule diameter: Ø 300 mm Maxi ferrule diameter: Ø 300 mm Rotation by speed variator Voltage: 380 V Drive wheels dimensions: Ø 250 x W 80 mm Weight: approx 300 kg

ZASO MSA-4PS beam welding line was built in 2009 in Poland by ZASO Polski Sprzęt Spawalniczy. The machine enables precise longitudinal welding of, among others, plate girders, T-beams, I-beams and H-beams, using the MIG/MAG or SAW method. The applied technical solutions fully automate the process, with the guarantee of obtaining the highest quality welds. The machining process is performed by two torches with integrated correction slides, which allow them to be moved remotely in two axes. A special frame clamp system holds the welded parts throughout the process, without the need for preassembly or the use of special tooling. The overriding control system also synchronises the work travel with the welding power sources. The ZASO automatic welding machine is also distinguished by its modular work table, consisting of up to five modules, each 6 m long. It has an integrated cooling s ...

A submerged arc welding system ESAB is available. Strip width: 30mm, strip drum: 30kg, wire diameter range: 3mm–5mm, welding rectifier: LAF1250, flux supply: VOAS10-E31, pressure tank volume: 100l, separator: Type 801. Documentation available. An on-site inspection is possible.

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2014 Control: Global Control Working area LxW: 2,500 x 9,000 mm Raceway length: 12 m 2 x oxy-fuel burner type ALFA 1 x Plasma Torch Power source Kjellberg HiFocus 360i Camera (scanning drawings) Suction: Donaldson

A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible.