40 REITZ used machine for sale

Agitator 150 litres with gearbox Rexroth 0.18 KW, i = 25 and propeller stirrer 150 mm Container: Single-walled stainless steel container 150 litres with drain tap. Rollable aluminium frame with aluminium profiles 45 45 mm. 4 steering wheels, 2 of them with brake. Geared motor: Rexroth, 3 x 230/400 volts, 0.18 kW, i = 25, n2=53 rpm. With motor protection plug. Shaft: precision stainless steel shaft D10, length 850 mm, diameter 10 mm, Material stainless steel Coupling: 2 clamping sets 17 to 10 mm, material stainless steel Stirrer: three-winged propeller stirrer, diameter 150 mm, material stainless steel 1.4581

Test press for single-axial pressure tests from 0 to 10 KN (0 to 1,000 KG) Purpose: Test press for single-axial pressure tests from 0 to 10 KN (0 to 1,000 KG / 10 KN maximum load). Without distance measurement. Manual lifting spindle press - Static pressing force 5 KN (0.5 to) - Portable, stable press frame made of polyamide PA 6G - Manual spindle stroke gearbox with spindle 20 mm, incline 5 mm - With handwheel diameter 120 mm and handle - Gearbox reduction 1: 10, per handwheel revolution 0.5 mm spindle path - This requires only very low hand force. - Table size 235 195 mm - Light width 190 mm - Stamp size diameter 70 mm - With 4 holes 8 mm for fixing a larger stamp plate - Very easy to operate by spindle and worm gearbox - Total weight approx. 25 kg Force measuring device: Weighing module with shear rod load cell for nominal load 1,100 kg.  ...

Very fast running agitator 0.25 KW - 3400 rpm. with aluminium propeller 300 mm Electric motor: Used electric motor 0.25 KW, 3 x 230/400 volts, n = 3,400 rpm, Weight approx. 10 kg. With motor protection plug. Wave: Precision stainless steel shaft D14, length 500 mm, diameter 14 mm, Material stainless steel 1.4301. Rigid clutch made of aluminium. Stirring organ: Two-flyer aluminium propeller d = 300 mm.

Agitator 0.25 KW with aluminium propeller 300 mm With traverse made of aluminium profiles 45 45 mm. Used electric motor 0.25 KW, 3 x 230/400 Volt, n = 1375 rpm, Weight approx. 15 kg. With motor protection plug. Shaft: precision stainless steel shaft D14, length 500 mm, diameter 14 mm, Material stainless steel 1.4301. Rigid coupling made of stainless steel 1.4571. Stirring organ: Two-wing aluminum propeller d = 300 mm.

Used beater 0,12 KW with gear motor Bauer 27 rpm and aluminum propeller stirrer 300 mm = 1350 RPM gear motor: Gearmotor Bauer, 3 x 230/400 v 0.12 kW, n1, n2 = 27 U/min., 24.5 NM, IP 54 weight approx. 8 kg = M2. With brake. Shaft: precision stainless steel shaft D14, length 500 mm, diameter 14 mm, material 1.4301 stainless steel. With rigid coupling made of aluminium. Stirrer: Double propeller stirrer, diameter 300 mm, material aluminium very slow running, torque mixer for use in attaching containers or kettles. Also can be used to prevent cavities in powder silos (bridging). With traverse for IBC containers or other containers for extra charge. Caution: Not suitable for aggressive media. 3 pieces in stock.

Used agitator 3.0 KW with long stirring shaft 1700 mm With beam in aluminium profiles 45 45 mm. Electric motor: Siemens 3.0 KW, 3 x 230/400 volts, 1420 RPM., IP55. Weight approx. 35 kg. Shaft: precision stainless steel shaft D28, length 1700 mm, diameter 28/30 mm Material stainless steel 1.4301. With 2 rigid couplings stainless steel 1.4301. Stirrer: Prismatic blade, length 300 mm, material 1.4301 stainless steel / polyamide.

Plate press - table press - Laboratory Press - Universal Press MHSP522 Press area 230 230 mm Clear width 200 mm Manual drive with worm gear screw jacks 5 KN Pressure 5 KN (0.5 tons) Weight 55 kg Per sensor revolution 0.5 mm path, this little manual force with great force, very fine deliverable. Pressing force is long maintained by self-locking.

Agitator 0.37 KW, 400V, 1340 RPM Coupling aluminium Agitator shaft d = 14 mm, L = 500 mm, stainless steel 1.4301 Stirrer stainless steel, with angle-adjustable angle leaves, d = 244 mm, angle blade width 50 mm, stainless steel 1.4301

The small laboratory press MHSP5 can perform very well with the round stamp (70 mm diameter) deformations of many materials. By delivering fine (0.5 mm per wheel revolution), deformations are carried out very accurately. Small punching or stamping operations are possible. The press is driven by a worm gear screw jacks, which requires minimal hand strength by high reduction ratio. The pressing frame consists of stable-dimensioned polyamide PA6G. Here are some technical data:-static force 5 KN (0.5 to) - portable presses frame made of polyamide PA 6 G, very stable design, with FEM program added - spindle manual jacks 20 mm, pitch 5 mm - with Handwheel diameter 120 mm and handle - gear ratio 1:10, per the Handwheel 0.5 mm screw - table size 235 195 mm - clearance width 190 mm - stamp size diameter 70 mm with 4 holes 8 mm for mounting a major stamp Very easy operation with spindle and w ...

General SKUR0279 MakeKonrad Reitz Ventilatoren GmbH & Co. KG LocationBarneveld CEcheck TypeKXE 200-002530-00 Pressure Pressure buildup0.2 Bar Main Features Capacity25 m3/Min Motor30 KW Pressure0.2 Bar Specified Features - Blower Blowercheck Capacity1500 M3/h Motor30 kW 400/690 Volt With sound absorbercheck Inletdia. 180mm Outletdia. 90mm Information No.290567 Year of construction2012 Floorspace2,3x1,6 M Total height4,5 M Weight1250 KgBlowersReitzBlowers > BlowersBrand > Reitz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!