4 OPTIMUM band saws used machines

Band Saw Optimum S300 VG BJ 2000

cutting diameter: max. 225 mm saw band length: 2.480 mm width of saw-band: 27 mm dimensions of saw-band: 2.480 x 27 x 0,9 mm cutting angle: 0 - 60 ° band speed: 20 - 90 m/min Cuttingrange 90°: max. 225 mm capacity 90 degrees: square: 190 mm capacity 90 degrees: flat: 150 x 245 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 90 mm capacity 60 degrees: flat: 120 x 90 mm capacity 45 degrees: round: 145 mm capacity 45 degrees: square: 150 mm capacity 45 degrees: flat: 190 x 150 mm total power requirement: 1,5 kW weight of the machine ca.: 185 kg dimensions of the machine ca.: 1,5 x 1,2 x 1,6 m Documents: Saw Bands: 1x Coolantsystem: Metal Bandsaw OPTIMUM - OPTIsaw S 275 PV The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 115 mm capacity 90 degrees: flat: 100 x 150 mm band saw dimensions: 1638 x 13 x 0,65 mm : 20/29/50 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Optimum 275 N Demonstration Machine Model: Opti S 275 N Technical data: Cutting range 0 degrees round: diameter 225 mm Cutting area 0 degrees: 245 x 180 mm / rectangle Cutting range 45 degrees round : diameter 160 mm Cutting range 45 degrees: 160x160 mm / rectangle Cutting range 60 degrees round: diameter 100 mm Cutting range 60 degrees: 100x100 mm / rectangle Lifting the saw bracket: manual Feed: infinitely adjustable

cutting diameter: 225 mm saw band length: 2480 mm cutting width: max. 245 x 150 mm voltage: 230 V power capacity: 1,5 kW dimensions of saw-band: 2480 x 27 x 0,9 mm mitter cutting: 0 - 60 ° cutting speed: 20 - 90 m/min weight of the machine ca.: 185 kg dimensions of the machine ca.: 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Optimum Opti S 275 G Max height of workpiece: 225 mm Sawspeed: 45 > 90 m/min Length of band saw: 2480 x 27 x 0,9 mm Power needed: 1,1 kW Length : 1360 mm Depth : 510 mm Height: 1690 mm Weight: 200 kg

Optimum Opti S 275 G Max height of workpiece: 225 mm Sawspeed: 45 > 90 m/min Length of band saw: 2480 x 27 x 0,9 mm Power needed: 1,1 kW Length : 1360 mm Depth : 510 mm Height: 1690 mm Weight: 200 kg

A compact Optimum bench column drilling machine is available. Motor power: 750W, drilling capacity steel: 25mm, continuous drilling capacity: 20mm, spindle taper: MK2, T-slots: 12mm, table dimensions X/Y: 280mm/245mm, quill stroke: 80mm, throat depth: 180mm, column diameter: 73mm, spindle to drilling table distance: 425mm, spindle to base distance: 618mm, speed: 2440rpm. Machine dimensions X/Y/Z: approx. 660mm/330mm/1020mm, weight: approx. 70kg. Without a drill chuck and drill chuck guard. Documentation available. An on-site inspection is possible.

A compact Optimum bench column drilling machine is available. Motor power: 750W, drilling capacity steel: 25mm, continuous drilling capacity: 20mm, spindle taper: MK2, T-slots: 12mm, table dimensions X/Y: 280mm/245mm, quill stroke: 80mm, throat depth: 180mm, column diameter: 73mm, spindle to drilling table distance: 425mm, spindle to base distance: 618mm, speed: 2440rpm. Machine dimensions X/Y/Z: approx. 660mm/330mm/1020mm, weight: approx. 70kg. Without a drill chuck and drill chuck guard. Documentation available. An on-site inspection is possible.

A compact Optimum bench column drilling machine is available. Motor power: 750W, drilling capacity steel: 25mm, continuous drilling capacity: 20mm, spindle taper: MK2, T-slots: 12mm, table dimensions X/Y: 280mm/245mm, quill stroke: 80mm, throat depth: 180mm, column diameter: 73mm, spindle to drilling table distance: 425mm, spindle to base distance: 618mm, speed: 2440rpm. Machine dimensions X/Y/Z: approx. 660mm/330mm/1020mm, weight: approx. 70kg. Without a drill chuck and drill chuck guard. Documentation available. An on-site inspection is possible.

A compact Optimum bench column drilling machine is available. Motor power: 750W, drilling capacity steel: 25mm, continuous drilling capacity: 20mm, spindle taper: MK2, T-slots: 12mm, table dimensions X/Y: 280mm/245mm, quill stroke: 80mm, throat depth: 180mm, column diameter: 73mm, spindle to drilling table distance: 425mm, spindle to base distance: 618mm, speed: 2440rpm. Machine dimensions X/Y/Z: approx. 660mm/330mm/1020mm, weight: approx. 70kg. Without a drill chuck and drill chuck guard. Documentation available. An on-site inspection is possible.

saw blade diameter: 315 mm cutting diameter: 85 mm stroke: mm mitter cutting - all-position: ± 45 ° turning speed range: 19 / 38 1/min power requirement: 0,75 / 1,5 kW coolant: voltage: 400 V total power requirement: 1,5 kW weight of the machine ca.: 235 kg dimensions of the machine ca.: 0,55 x 0,90 x 1,75 m - Coolant device - Machine base - without circular saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7877 Type: TH 4010 Producer: OPTIMUM Created: 2018 Parameters: Maximum turning length: 1000 mm Maximum turning diameter over bed: 410 mm Minimum spindle speed: 45 1/min Maximum spindle speed: 1800 1/min Cone: MK 3 Rotary spindle pass-through diameter: 52 mm Power consumption: 1.5/2.4 kW Length: 1920 mm Width: 740 mm Height: 1222 mm

bore capacity in steel (diameter): 25 mm throat: 210 mm : total power requirement: kW weight of the machine ca.: 0.085 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 13 mm throat: 235 mm bore stroke: 60 mm spindle taper: B 16 spindle turning speed - stepless: 100-3000 U/min table surface area: 290x270 mm column diameter: Ø 60 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): Ø 25 mm throat: 209 mm bore stroke: 95 mm turning speeds: 12 Stufen spindle taper: MK 3 table surface area: 308x308 mm distance spindle /table: 770 mm spindle turning speed range: 200-2440 U/min total power requirement: 0,75 kW weight of the machine ca.: 105 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 245 mm turning length: 800 mm total power requirement: 4.5 kW weight of the machine ca.: 1.25 t required space: 1.96x1.69x1.06 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 750 mm y-travel: 230 mm z-travel: 360 mm total power requirement: 5 kW weight of the machine ca.: 1.3 t required space: 1.65x1.3x2.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 270 mm z-travel: 430 mm : 630 mm table-size: 1120 x 270 mm spindle turning speed range: 45 - 1660 U/min spindle taper: SK 40 control: konventionell spindle motor: 2,2 kW total power requirement: 2,4 KVA weight of the machine ca.: 1,35 t dimensions: 1,8 x 1,4 x 1,8 m Machine equipped with: - Digital display - Machine light - Coolant system - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 200 mm

Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Optimum Optidrill DH 32GSV Admission in drilling-spindle (morse): Mk3 Max drill capacity: 30 mm Table dimensions: 420 x 400 mm SPEEDS: 40 > 3000 rpm Max drilling depth: 125 mm Motorpower: 2,2 kW Length: 820 mm Depth : 450 mm Height: 2230 mm Weight: 324 kg

turning diameter: 420 mm turning length: 1500 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 590 mm centre height: 210 mm Turning length in the bed bridge: 260 mm reus: 16 (45-1800) U/min tail stock: MK 4 quill stroke: 120 mm diameter of quill: 50 mm spindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mm spindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/min feed: plan 17 / 0,025 - 0,85 m/min total power requirement: 4,6 kW weight of the machine ca.: 1340 kg dimensions of the machine ca.: 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range  ...

x-travel: 580 mm y-travel: 200 mm z-travel: 340 mm speeds: 115 - 1750 U/min table surface area: 1000 x 240 mm tool taper: ISO 40 total power requirement: 4,5 kW weight of the machine ca.: 820 kg dimensions of the machine ca.: 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with mic ...

OptiGrind GU18 Double Grinder 0.45kW 230V 50Hz Grinding wheel 175mm x25mm Speed 2850 rpm G&STÜ-3101510

thickness of jaw: 127 mm clamping width: 0 - 208 in 3 Stufen mm clamping capacity: 4000 kg total power requirement: manuell kW weight of the machine ca.: 52 kg dimensions of the machine ca.: 670 x 151 ( L x H ) mm Furnishing: - hydraulic machine vice - Robust structure for milling, drilling and grinding - Vice body made of high quality cast iron - Guide surfaces hardened and ground - Jaws hardened, ground and exchangeable - Protected spindle - Booster system, little effort required, high pressure when clamping - Wide clamping range thanks to locking bolts with different hole spacings - With turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.