7 NETZSCH presses used machines

used, kpl. 1 year warranty, plate size 800 x 800 mm, 95 plates, closed drain ( 4-hole), 30 mm cake thickness, pressure 15 bar, capacity approx. 1350 liters, filter area 95m2, dimensions 7500 x 1300 x 2000 mm, weight approx. 7 to

used, kpl. 1 year warranty, plate size 800x800 mm, 50 plates, open drain, 25 mm cake thickness, pressure 15 bar, capacity approx. 660 liters, filter area 53m2, dimensions 5500 x 1600 x 1200 mm, weight approx. 5 to

Cat-nr. 13-0211 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 4,0 bar capacity: 1.500 litres/h Motor: 0,55 kW Connection: inlet/outlet: DN 40 according to DIN 32676 - can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Height: 73 cm Length: 141 cm Width/Depth: 45 cm Weight: 56 kg The pump is tested; 100% function guarantee! For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

used, kpl. 1 year warranty, built in 1994, plate size 800x800 mm, 60 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 800 liters, filter area 64m2, dimensions 5500 x 1500 x 2200 mm, weight approx. 6 to

used, kpl. 1 year warranty, plate size 250 x 250 mm, 15 plates, open outlet, 15 mm cake thickness, pressure max. 15 bar, capacity 10 liters, filter area 1.5 m2, dimensions 1300 x 500 x 1300 mm, weight 300 kg, optionally with manual or motor hydraulics, with or without feeding pump and Piping

used, kpl. 1 year warranty, plate size 400 x 400 mm, 25 plates, open outlet, 25 mm cake thickness, capacity 75 liters, filter area 6.5 m2, pressure max. 10 bar, dimensions 2000 x 800 x 1600 mm, weight approx. 800 kg

Submersible pump Manufacturer: Netzsch Type: 4NT04 Length: approx. 1,80 m Characteristics of the immersion pump -insensitive to Sandy shares in the pumped liquid -pulsation promotion -very high suction capacity The immersion pump offers you: -low life cycle costs -high pressure stability -exact dosing accuracy Advantages of the immersion pump -Operation possible at high water content in oil -Reliability for oils with high viscosity -ready to use media with high fixed material freight Submersible pump is still unused, so as new and in very good condition!

Filter tower with 166 nozzle filters with automatic pneumatic cleaning used Manufacturer: NETZSCH Total filter area approx. 225 m2 166 hose filters each approx. 1.36 m2 filter area Wire filter baskets approx. 120 mm length approx. 3.6 m with pneumatic cleaning 4 pneumatic knockers and compressed air loosening Collecting hopper with vibrator and blow-through lock Tower diameter outside: approx. 3.4 m incl. flange approx. 15 cm Tower height approx. 13.5 m Total dimensions with boxes for cleaning: approx. 3.4 x 4.1 x 13.5 m The filters were used in a carbon production plant. Above the filters there is a room about 4 m high, closed with a door, which makes it possible to change the filters inside. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

used chamber filter press / filter press Netzsch 1200 x 1200 record size: 1200x1200mm cake thickness: 30 mms benefit length: 8,200 mms chamber number: 120piece filter pressure: 15 bars record transport: at the side automatically

Bead mill Manufacturer: Netzsch Type: LMK-4 Item no.: 840490 Year of construction: 2001 Volume: 6 l Operating pressure max.: 10 bar Operating temperature: max. 50 °C Engine power: 15 kW with operating instructions with various spare parts (grinding chamber, GLD, etc.) with control cabinet and control system Mill & control panel in EEx protection Ceramic grinding chamber with pressure gauge, temperature monitoring, barrier pressure station Machine in excellent condition LWH: 1200 x 600 x 1550 mm LWH control panel: 600 x 600 x 1750 mm

used membrane chamber filter press / filter press Netzsch 800 x 800 mix parcels record size: 800x800 mms cake thickness: 32 mms benefit length: 4,768 mms filter surface: 34m? filter pressure: 15 bars record transport: automatically the arrangement is in a very good state.

Revised and repainted. The images are sample photos of similar machines and are intended to show the execution and quality of the revision. All wear parts are replaced. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Panel size: 630 x 630 mm Dimensions: approx. 2000 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 210 litres Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", central Number of plates: 25 plates Material sheets: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filter trough + drip tray in plastic. Engine hydraulics with single-acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator has to push the pressure plates back by hand. Optional: fill ...

Chamber filter pressing rack Netzsch uses benefit length: 3,500 mms record transport unilaterally not available the machine served as a spare part bearer, is entire incl. wheel tins.

Mixing hopper with 2 paddle mixers Feed screw down Pump speed control Type: NM045SP02512B Com.: 35300131 MaschNr.: 289249 Year of construction: 1997 Condition very good Pump motor Flender in ex e II Performance: 3.6 kW, 1440 min-1 Transmission Lenze speed controlled 1 Paddle mixer: speed controlled N1-n2 = 28-143 min-1 Browse gear : KW 1.35 in Exx 2. Paddle mixer: 120 min-1, 1.35 kW in Exx Dimensions: LWH = 2800x500x700mm Weight: 600 kg Mixing and pumping of viscous products with solids

Pump with substructure and drive Min. Max. Flow rate 4 m³/h 35 m³/h Differential pressure 14.9 bar 3.9 bar Joint type: K (arch tooth joint) Joint seal: Protective sleeve screwed Joint seal: material EPDM, sleeve inside FPM Joint Lubrication Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Special version m.STP2 Stator Bolt Material: Galvanized Steel Accessories mounted on the pump STP-2 without temperature controller Geared Motor North, Type SK52-180MP/4

For sale is a used progressing cavity pump from the renowned manufacturer NETZSCH, model Nemo NM076BY03S18B. The pump is ideal for demanding conveying tasks in industry and is immediately ready for use. Specifications: Manufacturer: NETZSCH Pumpen & Systeme GmbH Type: NM076BY03S18B Type: Progressing cavity pump with substructure and drive Flow rate: min. 4 m³/h max. 35 m³/h Differential pressure: min. 14.9 bar max. 3.9 bar Joint Type: Bolt Joint Joint seal material: EPDM/1.4401 Joint Lubrication: Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Special version m.STP2 Geared Motor North, Type SK52-180MP/4 -F(VL) TF Price on request Location: 23775 Großenbrode, Germany

Machine name: Filter press used Manufacturer: Netzsch Type: 800/32 Year of Make: 1984 Design: Side-spar press Filter pressure: 15 bar Press capacity: approx. 480 litres Procedure: Closed Filter area: approx. 34 m2 Plate format: 800 x 800 mm Number of plates: 32 Panel material: Polypropylene Plate Conveyor: Automatic Filter Cloth Washer: No Panel package length: approx. 2000 mm Cake thickness: 30 mm Closing pressure: 350 bar Dimensions: L 4,500 x W 1,700 x H 2,000 mm Empty weight: approx. 5000 kg Accessories: A control cabinet, a hydraulic system, a light barrier & drip plates. Condition: Used Price: On request

Used eccentric screw pump Type: NM090SY02S12B Machine number: 355339 Built: 2004 Flow rate: 18/36 m3/h Pressure: 10 Bar Speed: 125/150 rpm pol switchable in 2 stages

Used eccentric screw pump Netzsch Type: NM090SY02S12B Machine number: 355338 Built: 2004 Flow rate: 18/36 m3/h Pressure: 10 Bar Speed: 125/150 rpm pol switchable in 2 stages

Used eccentric screw pump Nemo pump unit 4NE15A Built: 1997 Design: IMB3 Power: 0.75 KW Voltage: 230/400 V Speed: 624 rpm Machine No.: 284285 Direction of rotation: to the left, seen on drive shaft

Make: Netzsch Type: NES 30A No.: 40500562 / 01 Machinenr.: 255281 Year of construction: 1994 very good condition Gear: Stöber Type: C002N-0041-D90 L4 No.: 1088609 n = 330 min-1 Engine make: DIEZ Power: 1, 5kW Dimensions: LWH = 1300x250x270mm Weight: approx. 80 kg 2. Pump: identical, but with an off switch and adapter onto screw approx. 50 l Total height: 900 with funnel

Type: NUP 60 Machine number.: 218338 Com.: 205639 Year of construction: 1990 with screw feeder and paddle mixers Stöber gear Type R76-1027-750-4 No.: 874256 Rpm: 136-680 RPM Drive motor: DIETZ No.: 3807028 403195 B5/300 Power: 7,5 kW Paddle mixer power: 1,5 kW Mixing trough attachment approximately 150 l stainless steel Dimensions: LWH = 2400x630x1150mm with switchgear Weight: 600 kg

Type: NL 20 A Com.: 70 50 17 02 MaschNr.: 271872 Year of construction: 1996 unused Engine water cooled (0.75 kW) speed controlled transmission Pharmaausfuehrung Dimensions: LWH = 1400x300x450mm Weight: approx. 70 kg

used, kpl. 1 year warranty, plate size 470 x 470 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 130 liters, filter area 11m2, dimensions 2800 x 800 x 1200 mm, weight 850 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 400 x 400 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 90 liters, filter area 8m2, dimensions 2500 x 700 x 1200 mm, weight 700 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths