3 MERCODOR waste shredders used machines

Ready exhibition machine MERCODOR ZM 52 Year 2015 Mercodor Shredder ZM 52 Cutting area 650 x 540 mm or 1050 x 540 mm with 22 kw

Mercodor twin-shaft shredder with a cutting space of 1200x600 mm, knife loading, optionally e.g. 40 mm, 3 hooks or 20 mm, 25 hooks... Solid housing welded design with appropriate bearing and sealing to the cutting chamber.

Mercodor shredder ZM 44 with a cutting space of 600x380 mm and 7.5 kw drive. Complete ready-to-use machine with large base.

Ready exhibition machine built in 2016 Mercodor ZM 44 Cutting Chamber 500 x 380 mm knife 14 3 mm hook drive 7,5 kw

the two shaft shredder with knives 14 mm 3 hooks and 7.5 kw

Manufacturer: Mercodor, Type: ZM 44, Year: 1992, Control: yes, Number of rotors: 2, Number o knifes: 33, kW power rotor: 7,5, Feeding width mm: 500, Feeding hight mm: 650, Length/width/height: 1400x1050x1500, Wight approx. kg: 350, Year :1992

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

This is a second hand machine with 22 kw. Knife 24 3 mm hook complete with Hopper, base and switchgear.

XXL Large tire detwulster for OTR tires up to 1600 mm inner diameter! Mobile on rolling frame. Transport with unrolling tipper. Weight approx. 9500 kg, length approx. 6500 mm. Very good condition!

Doppstadt DW 3060 Biopower Type F - Built in 2017 - Hours 6118 - Engine MTU 490 hp - AD BLUE - Weight 25,000 kg - 42 teeth -Remote control - Humidification system - Rear conveyor 5.5m - Overbelt magnet Machine is overhauled and immediately available

ID2841 Wagner WS22 year/Bauahr 2010 ran only a little 3.7t Shredder, 22 KW Shredder, 22 KW

SPECIFICATIONS: Installed power: 18.5 kW Inlet width: 300 mm Inlet height: 200 mm Rotor: Ø 252 mm Intake manifold: Ø 200 mm For the shredding of the following wood waste: - MDF strips - Pressed chipboard -Plywood -Cardboard EQUIPMENT: Motorized carpet: 11000 x 330 mm

Manufacturer:Husmann Model: HL II 1622 Year of Manufacture: 2020 - Maximum RPM: 20 – 40 - Operating Voltage: 230V / 400V - Operating Pressure: 400 bar - Power: 330 kW - Permissible Total Weight: 22,000 kg - CE Certified Find more here - / Contact us at -

Chip Receycling Plant System Arboga / Sweden

Bio shredders/ mixers Seko Constellation 6000/200ME Electrically powered stationary organic shredder/mixer for processing garden waste, cellulosic waste, organic waste, market waste, green waste, etc. for composting Power: 180 KW Total weight: 11,100 KG Basic equipment: • Branch gearboxes with planetary gearboxes and electric motors • With control console to start the machine at full load • Automatic gearbox control and reversal of the chopping unit • Hopper made of wear-resistant steel • Spiral chopping shafts made of wear-resistant steel • Chopping blade made of high-strength steel • Replaceable, adjustable counter blades made of wear-resistant steel • Retractable discharge belt, discharge height up to 3m Condition of the machine The machine is in good technical and visual condition. Warranty: The machine will be sold in the condition existing ...

TECHNICAL DATA: Hopper opening: 700 x 360 mm Installed power: 15 kW Rotor: 600 x Ø 252 mm

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: SSI Schaefer Capacity: 770l Total width: approx. 1,350 mm Total depth: approx. 1,470 mm Total height: approx. 1,115 mm Material color: black Tyres: 4 tyres (2x braked) Material: Polyethylene (PE) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. A further desired transport or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: SSI Schaefer Capacity: 770l Total width: approx. 1,350 mm Total depth: approx. 1,115 mm Total height: approx. 1,470 mm Material color bin: black Material color lid: green Tyres: 4 tyres (2x braked) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. A further desired transport or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Originally, the recycling of fluo ...

n°1 Cutting chamber: 300x330mm. n°2 hexagonal shafts. n°33 counter-rotating blades, blade Thickness 10 mm or n°10 counter-rotating blades, blade thickness 30 mm n°1 reducer with electric motor 7, 5kW, 400V, 50Hz, Shafts rotation speed 18/20 rpm. Total weight of the Shredder 700 Kg.

STYRO-CUT 350 Shredder for Polystyrene specifications Motor power: 5.5 kW / 380 V Throughput: approx. 4 m³ / hour (depending on material and sieve) Speed: 2,900/min. Dimensions: W x D x H: 640 mm x 1,500 mm x 2,400 mm Volume reduction: 70 – 80 % Weight: approx. 170 kg Insertion opening: Ø 280 mm Height insertion: 1,600 mm Granulate size: up to 6 mm STYRO-CUT 350 is a device for shredding (granulating) the polystyrene (EPS). The packaging residues, sections are entered into the insertion funnel and the material is automatically sucked in by the device. The material is shredded by the device in a single step, granulated and filled into bags or transported to the silo. The device reduces the volume by 70-80% and thus also reduces the cost of storage and transport. Un contaminated ESP granules can be reused in the production of new products from EPS. The produced granu ...

Specifications Cutting width: 7.5x40-80 mm Year of construction: 1999 Productivity: approx. 300 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 250 mm/s the safety step: 2+1 wg DIN 32757 P-1,O-1,T-2 wg. DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Pressing force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity: - Bale weight: - Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

4 shaft shredder for crushing of thick-walled pipes. Supply via feeding shaft (not in scope of delivery, can be manufactured alternatively) Manufacturer Vecoplan Drive: Rotorshaft 1: 37 kW Rotorshaft 2-4: 30 kW (each)

ORDER NO. 7032 TECHNICAL SPECIFICATIONS - loading hopper inlet 1050x610mm - outlet for shredded wood fi 160mm - rotor working width 580mm - main engine 18,5kW - pump motor 0,75kW - number of knives 14pcs - knife size 30x30mm - sieve 15mm x 20mm - pressure drawer - electric autorewers - dimensions length / width / height 2000x1130x1530mm - weight 970kg ADVANTAGES – German production – autorewers – pressure drawer – very good condition – used chipper Net price: 47900 PLN Net price: 10764 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

Twin Shaft shredder mod. ITS850x550E- 22 kW. Heavy duty construction. Shredding chamber dimensions 8500x550 mm with n°2 counter-rotating hexagonal shafts fitted with n°28 blades with a thickness of 30 mm, 1 hook double spaced to 60mm. Including n°1 main gearbox with straight spur gears for fast and slow shaft. Driven by n°1 x 22 kW motor The shredder is supplied complete with supporting stand, feeding hopper. The electric control panel of this shredder will be fitted with a Siemens PLC to control the working logic of the shredder including the automatic shafts reversal system in overloading conditions, a display will show the working parameters and operating conditions. The total weight of the shredder is around 3.000 Kg.