4 HERBOLD granulators used machines

Low-speed pre-shredder for rubber, plastic, cables, composite material Well suited for exposing material composites, e.g. tires, old cables With integrated safety shear coupling to protect against foreign objects Rotor 600 mm diameter x 1450 mm working width Closed rotor with offset segment blades, mounted on cassettes 24 rotor blades, 2 stator knife rows Swivelling strainer basket, perforations of your choice With pressure device (pendulum swingarm) Drive cable 90- 200 kw

Herbold granulator Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

HERBOLD Fine Mill PU800 Suitable for soft to medium-hard materials Previously used for plastic fine grinding Grinding discs diameter 800 mm Drive motor 90 kw

According to the description below

mechanical dryer drive 90 kW BRAND NEW MACHINE centrifugaldryer for surface drying of the material fraction primarily for film flakes, granulate from PET bottles and other rigid types of plastics.

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

Two-shaft shredder Drive 37.50 kW

The HERBOLD plastcompactor is a system for the agglomeration of films, fibres, chips, dust and flakes. Poorly free-flowing waste is turned into an agglomerate with a high bulk density and good flowability, which can therefore be applied directly to extruders and injection moulding machines. The plant for sale has a main motor with 110 kw drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA, and bioplastics can be agglomerated without thermal damage or discoloration. The system consists of the feeding device with silo, the compactor, a re-cutting mill with sifting and fine material return On request, a pre-shredding can be offered that is adapted to the task Tests can be carried out in our technical center for suitability tests and sampling. We are the manufacturer of this s ...

Machine type: friction washer / friction separator Manufacturer: NEUE HERBOLD GMBH Year of manufacture: NEW rotor diameter: 560 mm working length: 3000 mm Drive: 30 kW for integration in recycling processing plants - to wash plastic materials such as film flakes, foil chips, granules, PET bottle-flakes,...

Inlet: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm

Low-speed pre-shredder for rubber, plastic, cables, composite material Well suited for exposing material composites, e.g. tires, old cables With integrated safety shear coupling to protect against foreign objects Rotor 600 mm diameter x 1450 mm working width Closed rotor with offset segment blades, mounted on cassettes 24 rotor blades, 2 stator knife rows Swivelling strainer basket, perforations of your choice With pressure device (pendulum swingarm) Drive cable 90- 200 kw

Granulator especially designed for inline size reduction of thin film (like BOPP / BOPET). Feeding via roller feeder. Extreme througput rate ! brand: NEUE HERBOLD made in germany - heavy duty model - drive 250 kW - size reduction of film - feeding via roller feeder - Rotor diameter: 800 mm - working width: 1950 mm - for very high throuput rates for the size reduction of film, tangled or bunched tapes and bands, PP big bags, crates or other hollow containers, BOPP / BOPET / PP in-line and off-line film extrusion lines.

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Conveyor belt / belt conveyor Belt width: approx. 300 mm Axle distance: approx. 3,130 mm Drive: 0.75 kW new - only very short in use

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Inlet: 450 x 580 mm Rotor width: 600 mm Rotor diameter: 450 mm Rotor blades: 3 Stator knives: 2 Motor: 55 kW

NEW HERBOLD granulator Universal mill – heavy design -Year of construction 1998 - made in stainless steel - from the technical center (machine was used exclusively for experimental/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Dzk8qe Stator knives: 2 Drive: 7.5 kW Double slope With roller feeder, electric switch box and soundproofing box

Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy

Hammer mill Working width: 1600 mm Rotor diameter: 1000 mm Drive: 75 kW Application: Shredding of all impact-brittle materials such as - impact-resistant plastics - E-waste -Wood waste - mineral insulation waste (e.g. glass wool, rock wool,...)

Plastic compactor Main drive 132 kW Complete system with recutting mill, fine material separation and recirculation, electrical control

Used Herbold Mill Model PU 300 Refurbished - rotor new, with sieve basket, newly mounted, converted dosing chute Mill made of INOX Ex-proof