100 GERMANPLAST used machine for sale

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...

Hydraulic Gripper

Our VERTICAL MIXER 5 to 30 m3 are used to blend different batches of one material and grant a more homogeneous quality within one lot., Please see our attached [PDF](drive.google/file/d/1kQKOuxvrbrpfSZBrVxh2jrXbJ7StrQMp/view?usp=d rive_link) and photos for different sizes availables., Another important task they are used for, is to complete cooling of materials after a heat related process, like regranulation or agglomeration, in order to avoid the possibility that materials, due to residual heat, clog into lumps., Our standard mixers for plastic materials are constructed in sturdy electro-welded steel, painted on the outer surface with an anti-rust layer and a protection coating. Installed in a sheltered, dry place they will perform at their best for years ., - inner auger diam.350 mm., - lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600 x ...

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination) About 60 lt., The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- for-water-powder-granule) (available separately) to be reused in the proces ...

4-SHAFT SHREDDER 22 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 11 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.

4-SHAFT SHREDDER 15 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 7,5 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.

MAGNETIC SEPARATORS, in form of overbelt plates,, grids, channels, stars, etc.

VERTICAL MIXER 20 m3 capacity, total height approx 7.000 mm including transmission group (can be customized), max Ø 2.400 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, max electric level indicator, paddle type, automatic lubricating kit, electric motor 15 kw, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance, drawings and instructions manual in English., Possible additions: wheeled slide, feeding screw and hopper, extraction auger, b ...

Including: Injector Hopper Pipe connection diam. 160 mm. Bends Clamps Cyclone Customized to your project

Made in sturdy painted carbon steel or AISI 304 stainless steel, drained or covered,.. Customized to your project, just send us your sketch with length, inner and outer diameter, drive, configuration or share your project with us and we will offer you the best solution.