4 FPT travelling column milling machines used machines

Key data: 14000 mm, 1500 mm, 3000 mm

Stock number 1110049 Machine Type: CNC Long Bed Milling Machine Make FPT Type Spirit 130 Year of construction 2012 Control type HEIDENHAIN TNC Itnc 530 X-off (mm) 14,000 Y-displacement (mm) 1,500 Z-off (mm) 3,000 Speeds of (rpm) max. 4,000 Tool holder Iso 50 Rapid traverse max 25,000 mm/min Tool changer for 60 tools in really top condition and the machines can be demonstrated under power Information: CNC Control One 29,766 hours Program leach 9655 hours

Ref. -No.: 10347 Manufacturer: FPT Year of construction: 2006 Type of control: CNC Control: Heidenhain 530 Country of origin: Italien X-Travel: 12000 mm Y-Travel: 3500 mm Z-Travel: 1500 mm Tool Piece Magazine With: 80 Pcs./pcs. Spindle Speed: 3000 RPM Drive Capacity - Spindle Motor: 37 kW Round table 1 (lxw): 2500x2500 mm Round Table 1 - V: 2000 mm Rotary table 1 max. load: 30000 kg Round table 2 (lxw): 2500x2500 mm Round Table 2 - V: 1500 mm Rotary table 2 max. load: 30000 kg Further information:

Ref. -No.: 10350 Manufacturer: FPT Year of construction: 2012 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Italien X-Travel: 14000 mm Y-Travel: 5000 mm Z-Travel: 1500 mm W-Axis: 1000 mm Numbers Of Tools In Magazin: 24 Drive Capacity - Spindle Motor: 60 kW Rotary table diameter: 3000x3000 mm Rotary table travel V: 2500 mm Rotary table max. Load: 80000 kg swivel angle: 180 ° Further information: +3D M Sensor +CNC controlled angle head: micro

Travel path X/Y/Z: 1670mm/800mm/900mm, Speed: 4000rpm, Tool positions: 16, Tool holder: SK40, Table dimensions X/Y: 2000mm/900mm, Weight: approx. 4500kg, Operating hours: approx. 9680h. According to the error message, the standstill monitoring of the Z-axis is defective. Documentation available. An on-site inspection is possible.

Technical data of the FPT Pragma M40 mobile column milling machine used: Longitudinal travel: 4000 mm Vertical travel: 1600 mm Transversal travel: 1200 mm Working feeds: 0-15000 mm/min Fast feed: 30000 mm/min Maximum thrust on axes (X,Y,Z): 2000 from N Spindle motor power (continuous service S1): 28 kW 38 hp Spindle motor power (intermittent service S6-60%): 35 kW 47,6 hp Constant torque spindle speed range: 0-312.5 g/min Spindle speed range at constant power. 312.5-5000 rpm Maximum spindle torque (continuous service S1): 856 Nm Maximum spindle torque (intermittent service S6-60%): 1070 Nm Supply voltage: 50Hz Current consumption: 119,2A Total installed power: 65 kW 88,4hp

Key data: 4000 mm, 2500 mm, 1300 mm

VERY RARE – A USED MACHINE OF THIS TYPE IS HARDLY AVAILABLE ON THE MARKET We are pleased to offer you the following high-performance machine: This machine combines precision, performance and flexibility – ideal for demanding pattern and mould making as well as for high-performance aluminium machining. Due to its latest technology, specification, very good condition and year of manufacture, it represents an exceptionally rare opportunity on the second-hand market. 5-Axis CNC Gantry Milling Machine FPT Dinospin Year of construction 2019 Heidenhain TNC 640 Controller Table size 4,000 x 2,500 mm Table load max. 10 t/m² 2-axis NC swivel milling head C-axis +/- 270° A-axis +/- 185° Head torque (working/braking torque) 450 / 1400 Nm Travels: X 4,000 mm Y 2,500 mm Z 1,300 mm Feeds X/Y/Z up to 40,000 mm/min Feeds C/A up to 30 rpm Spindle drive power 22 ...

Stroke ( X/mm) 2500 Stroke ( Y/mm) 3500 Stroke ( Z/mm) 1300 Type of controll heidenhain Motor Power (kw) 103,6 Number of axes 5 Work hours 8500

Key data: 4 mm, 3 mm, 1 mm

5-axis CNC gantry milling machine FPT Dinospin Year of construction 2022 Heidenhain TNC 640 Controller Table size 4,000 x 2,500 mm Gantry longitudinal travel X 4,000 mm Cross path Y 2,500 mm Perpendicular travel Z 1,300 mm Feed and rapid traverse speed X,Y,Z 40,000 mm/min 2-axis NC swivel milling head C-axis +/- 270° A-axis +/- 185° Spindle drive power 22/33 kW Speed range 10 ~ 18,000 rpm Tool holder HSK-A63 120-fold tool changer Electronic handwheel with radio control Manual clamping of the milling head on the machine ram Direct tapping Dynamic RTCP (head programming without shifting the zero points) Automatic calibration system AUTOCAL Sensor for detecting abnormal vibrations Tool measurement and tool breakage detection using laser Workpiece probes Internal cooling 40 bar External cooling 10 bar Coolant gun Operating mo ...

This 5-axis FPT STINGER XL CNC milling machine was manufactured in 2008. Ideal for complex and precise milling tasks, it offers advanced capabilities for a variety of applications. Consider the opportunity to buy this FPT STINGER XL CNC milling machine. Contact us for more information about this machine.

Manufacturer: FPT Model: SIRIO-M Type of Machine : Milling Machine Total power: 60 kW Spindle taper: ISO 50 Spindle speed: 310 to 5,000 rpm Find more here - / Contact us at -

x-travel: 14.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: Heidenhain Itnc 530 total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 24000 mm y-travel: 3000 mm z-travel: 1250 mm spindle turning speed - stepless: 4000 U/min spindle taper ISO: 50 spindle motor: 37 kW feeds longditudinal/cross/vertical: 6000 mm/min rapid motion -longitudinal/cross/vertical: 15 m/min no. of tools in the magazine: 60 Stück control: HEIDENHAIN TNC 426 M total power requirement: - kW weight of the machine ca.: - t - CNC control HEIDENHAIN TNC 426 M - Automatic head 360° x 144 positions. - ISO 50 - Spindle extension L600 - ATC 60 positions - Spindle cooling (internal) 20 bar - Workpiece probe - Chip conveyor - Hydrostatic in x/y/z/a - Rigid tapping - preparation for horizontal Head There are no tables The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working Area: 6000 x 1200 x 3000 (Max Stroke) Max working feed: 8000 mm/min Max rapid feed: 15000 mm/min Fixings: ▪ Indexed head : max rpm: 4000 ▪ Nose: max rpm: 4000 Control: Selca 3045

x-travel: 6000 mm y-travel: 1200 mm z-travel: 2000 mm a-axis: 144 x 2,5 ° c-axis: 144 x 2,5 ° spindle turning speed - stepless: 187 - 4000 U/min spindle taper ISO: 50 spindle motor: 27 kW max. torque on the spindle: 1400 Nm feeds longditudinal/cross/vertical: 6000 mm/min rapid motion -longitudinal/cross/vertical: 15 m/min no. of tools in the magazine: 40 Stück control: HEIDENHAIN TNC 426 M total power requirement: 56,9 kW weight of the machine ca.: 27 t dimensions of the machine ca.: - m - CNC control HEIDENHAIN TNC 426 M - ATC for 40 tools (BT 50) - Indexable 2-axis milling head with 144 x 2.5° each - Internal coolant supply - Floor Plate 3500 x 2500mm - NC rotary table 1500 x 1500mm - Chip conveyor - Renishaw - Hydrostatics in x/y/z - Ball screws in x/y/z Coordinates - X=longitudinal / Y=transverse / Z=vertical The data for this ad was created with ModulMWS - the software solutio ...

x-travel: 1.750 mm y-travel: 1.400 mm z-travel: 550 mm Control: SIEMENS Sinumerik 840D sl Working area: : surface area: 1.000 x Ø1.200 mm max. workpiece weight: kg Feeds: : X-, Y- and Z-axis, stepless: mm/min rapid travel x/y/z: mm/min : : Constant Power at 100 % ED: 18 kW torque: 80 Nm turning speeds: 18.000 U/min : +/185° Direct Drive tool taper: HSK A63 tool changer: 60 fach dimensions of the machine ca.: 6,2 x 3,8 x 4,3 m total power requirement: 50 kW weight of the machine ca.: 20 t Equipment and accessories • Compact portal milling machine STINGER180 - Installation without contoured foundation • CNC control Siemens SINUMERIK 840D solution line • TULCE HSK-63A head with integrated, direct-driven A-axis • Stepless and endlessly rotatable milling table Ø1,200x1,000mm • Omlat spindle, max. speed 18,000 min-1 • Axis drives via precision ball screws and digital servo ...

- Chip conveyor - Laser tool setter - Portal Handwheel - Full A/B-Automatic head - High pressure coolant

- Head Pick up Station - CNC Indexing Micro Head 0.001 Gr - Spindle extionsion - Internal coolant system - ATC Chain Tool changer 60 Positions - Under power

FPT SIRIO-M Control: Heidenhain TNC 426 C Serial Number: LM0498020 Machine number: 1710799 CNC milling head automatically swivelling infinitely variable Spindle: ISO 50, 50 kW, up to 3000 rpm Hydrostatic Guides Travel (X/Y/Z): 4000 / 1200 / 2000 mm Table size: 5000 x 2000 mm Tool changer: 30-fold ATC (automatic)

This FPT DINO was manufactured in 2002. It features a Siemens 840D CNC, a table size of 1200x3000 mm, and travels of X2700, Y2200, Z800 mm. Equipped with a 5-axis continuous head with an electrospindle reaching 18,000 RPM and an 18-position tool changer. Consider the opportunity to buy this FPT DINO universal machining centre. Contact us for more information.

x-travel: 4000 mm y-travel: 2500 mm z-travel: 1300 mm Control: Heidenhain TNC 640 table-size: 4000 x 2500 mm table load: 10 t/m² spindle turning speed range: 18000 U/min tool taper: HSK A 63 feed: 40.000 mm/min spindle motor: 33 kW A-Axis: +/- 185 ° c-axis: +/- 270 ° distance between columns: - mm Passage height: - mm total power requirement: - kW weight of the machine ca.: 44,5 t dimensions of the machine ca.: - m Equipped with: - Heidenhain TNC 640 CNC control - Tupce universal milling head (2 axes) for 5-axis machining - 80-position tool changer (HSK A63) - Coolant system - CE mark - Enclosure - Measuring head for workpiece measurement The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 7000 mm, 1600 mm, 800 mm

Complete system with all the accessories necessary for installation and operation, Travel x = 7000 y = 1600 z = 800 / transverse stroke w = 600mm / General overhaul 2007, year of production 1991: New Siemens Sinumerik 840D control system, new drive motors, guide guides refurbished, new control cabinets. ECOCUT 1 was then operated for only a few months / Travel speed 12000 mm / min / w axis 6000 mm / min turntable TDV 2 max. workpiece weight 6t / clamping surface 1000x1000 turntable TDV 3 max. workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angle crank / chain tool change system / plate field / complete housing / Knoll hopper feed / suction / coolant system with belt filter All BWF fixators for the installation of machine bed and plate

Key data: 5000 mm, 275 mm, 310 mm

Urban AP 5000 F - Travelling column milling machine - Heidenhain track control TNC 410 M, control panel can be moved over the entire processing length - Robust basic construction as a welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z axis with ball screw (20 m/min) - 2 chip drawers - Swivelling clamping device for 4700 mm workpiece length - 10 Pneumatic workpiece clamps - Manually operated central lubrication - Moving disc tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - Machine light - Safety bumper - Machine guard pneumatically vertical opening - Year of construction 2005 - Control on: 26910h - Program run: 9185h - Spindle on: 6557h Defects: - Air hoses of the tensioners have to be partially replaced - Contact cables of the cylin ...

Key data: 8000 mm, 1500 mm, 2500 mm

Make : CORREA/ANAYAK Type: HVM 80 Year of construction 2014 Travel X/Y/Z 8,000 x 1,500 x 2,500 mm, Spindle speed max.6000 rpm Spindle power 28 KW Ganaukeit A and B axis 0.02 degrees Cooling by the spindle High-frequency spindle, type HFS IMT Mold, max. 26,000 rpm, max. 11 Kw Table m. 8,000 x 2,500 x 300 mm, T-slots 22 H12, distance T-slots 250 mm, Table load max. 15,000 kg/m², Distance between spindle and stand max. 1,675 mm, Feeds X/Y/Z max. 30,000 mm/min, Max. power 96 kw Machine weight 55,000 kg, Stand 12,000 kg, Plate field 16,000 kg, CNC screen control, Fabr. Heidenhain, type CNC I 530, With 1 control panel next to the machine adjustable in height and 1 control panel in At the front of the machine. Auto. Tool changer, chain version, max. 60 tools, Tool holder SK50, tool weight max. 25 kg, tool L max. 400 mm, Wireless hand control panel, Fabr. Heidenhain, Ty ...

Key data: 6300 mm, 1800 mm, 2500 mm

Brand: Anayak Engine No: F712 Type HVM 7000-MG CNC brand Heidenhain CNC type iTNC 530 Year of manufacture 2005 Table length 3,300 mm Table width 1,200 mm Maximum table load 15,000 & 28,000 X 6,300 mm Y 1,800 mm Z 2,500 mm Holder SK 50 Speed 60 - 3,000 RPM CNC controlled milling head Index after 2.5 ° Controlled rotary table 360 ° - 2,000 x 3,000 mm Cooling by spindle Conveyor Turn on the spindle 37/51 Kw Max. workpiece weight 28,000 kg Machine weight 65,000 kg

Key data: 6000 mm, 2000 mm, 3000 mm

Machine Type: CNC Travelling Column Milling Machine Make ZAYER Type KCU6000 Year of construction 1992 Control type Heidenhain TNC 415 X-way (mm) 6,000 Y-off (mm) 2,000 Z-off (mm) 3,000 Speeds from (rpm) 20 - 1,800 Tool holder BT50 Feed longitudinal (mm/rev) 5 - 5000 mm/min Feed Transverse (mm/U) 5- 5000 mm/min. Vertical feed rate (mm/rev) 5- 5000 mm/min. Rapid traverse 10,000 mm/min. Total power(KW) 34 Length (mm) 11,000 Width (mm) 2,500 Height (mm) 7,000 Weight 31.000 kg Information 'Juaristi MG6' rotary table: 1500 x 1200 mm With coolant pump Cooling system: 2.5 bar Tool cooling: 15 bar