82 FLOTT used machine for sale

Boring power: 23.0 / 28.0 mm Boring depth max.: 140 mm Center of spindle to wall or column: 300 mm Column diameter: 125 mm Size of table plate: 415 x 385 mm Speed: 100 - 2000 U/min. spindle taper MT: 2 MK voltage: 380 V Motor output: 0.9 / 1.4 KW weight of the machine ca.: 225 kg Dimensions (L/W/H): 900 x 600 x 1960 mm maintained condition () Furnishing: - V-belt operated column drilling machine - Right/left running of the work spindle - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103760 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 30.0 m/sek grinding width: 500 Plantisch mm suction capacity: 630 m³/h total power requirement: 3.75 kW weight of the machine ca.: 100 kg range L-W-H: 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible ext ...

spindle cone: MK 1 turning speeds: 200 - 3000 U/min table-size: 300 x 220 mm total power requirement: 520 W weight of the machine ca.: 200 kg dimensions of the machine ca.: 8004001800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sanding belt dimensions 150x2250 mm Grinding table dimensions 525 x 160 mm (without plate, the plate you can see in the photos was glued on) Table dimensions on pulley 320 x 280 mm Suction nozzle Ø 100 mm Motor power 1.1 kW Connected loads 400 V, 50 Hz, 3~, 2.5 A Dimensions: 1,400 x 400 x 1150 mm

Spindle mount MK 3 Drilling capacity in steel: 30.0 mm Coolant pump

Drilling capacity steel/GG: 15 mm Spindle holder: 1 MK Projection: 300 mm Table size: 210 x 300 mm Quill stroke: 110 mm Spindle speeds: 200 - 3000 rpm Drive motor: 380 V, 1.1 kW Space requirement: 850 x 420 x 1860 mm Weight: 220 kg

Standard equipment: Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with Schuko plug 3-year warranty for single-shift operation Continuous/normal drilling capacity (mm) 6/8 (in E335/ST60) Tapping capacity (pitch dependent) M5 Spindle B12 Drilling depth (mm) 60 Projection (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), spacing (mm), dimension width (mm) Cross grooves, number 2, 14/26 Drill head height adjustment by hand Feed (mm/revolution) by hand Drilling depth stop ring (positive fit) Drilling depth indicator digi ...

Standard equipment Main switch Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with CEE plug 3-year warranty for single-shift operation Specifications Continuous/normal drilling capacity (mm) 23/25 (in E335/ST60) Tapping capacity (pitch dependent) M16x1 Spindle MK III Drilling depth (mm) 115 Projection (mm) 260 Column diameter (mm) 110 Usable work surface (W x L) (mm) 420 x 340 T-slot size (arm), spacing (mm), dimension width (mm)Quantity 2, 125, 13/26 Speed display: digital Drilling depth display: digital Drilling depth stop: quickly adjustable stop ring Fee ...

Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimension (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Cutting speed (m/min) 20 – 120 Wingspan (mm) 610 Working height (mm) 780 Machine dimension without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically redesigned, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in plain bearings Clear control panel to the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest demands on cutting accuracy Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed hydraulically incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic Full Stroke Cylind ...

Standard equipment: With swivel head (left/right) for mitre cuts, two speeds, Stable cast construction of the machine housing, Oil bath reduction gears, consisting of bronze wheel and hardened, ground steel screw. Quick-release vise with Counterclamping device for double workpiece clamping. Long-lasting, mechanical coolant pump Adjustable length stop Operating tool Machine colour: RAL 7037 Specifications KS 315 M Motor three-phase current 400 V, Pole switchable (kW) 1.3/1.9 Vise Span(mm) 110 Cooling tank capacity (l) 5 Working height with base frame (mm) 980 2 speeds (rpm) 41/82 Machine Dimension with base frame (mm) 1,000 x 1,100 x 1,800 Machine Dimension 12-month warranty for single-shift operation Not included: Saw blade (mm) Ø 315 x 32 Steel base frame

- Flow forming machine FLOTT SB 20 FB plus - Tapping device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Stepless speed control via central rotary knob - EMERGENCY STOP push button - Thermal overload protection - Spindle stop - Drill protection with electr. Hedge - Connection cable with CEE plug Flow molds for the production of threads in thin-walled metallic materials, Flow forming capacity at 3 mm sheet thickness 8 mm - Spindle: MK II - Drilling depth (mm): 100 - Projection (mm): 240 - Column diameter: 82 mm - Usable work surface (W x L) (mm): 340 x 280 - Table height adjustment with rack and pinion - Spindle speeds infinitely variable (1/min): 20 – 4,000 - Dimensions (mm): 355 x 705 x 1825 For more TECHNICAL DATA, please refer to the product sheet! 3-year warranty for single-shift operation Deliv ...

Key data: 13 mm

Bench drill Speeds 400 - 4800 rpm Height adjustable 15 cm Röhm Supra 1/32 - 1/2 Weight 35 kg 380 V 16 A

Key data: 16 mm

Column Drill Speed 200- 3000 rpm 380 V 16 A Height adjustable 55 cm Expellers Drill chuck Albrecht 3 - 16 mm

Key data: 700 mm, 400 mm, 400 mm

Manufacturer: Flott Type: BC 40 Super Year of Make: 2005 Tool holder: BT 40 Motor: 7.5/5.5 kW Spindle speed: 50-8000 rpm X-axis travel: 700 mm Y-axis travel: 400 mm Travel Z-axis: 400 mm

Double grinding machine TS 200 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Suction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimension without packaging (mm): 250 x 470 230 - Speed (1/min): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 Shipping time:immediately, from stock

Double grinding machine TS 300 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm 230 - Speed (1/min): 1250 - Three-phase motor 400 V / 2.2 kW: operating mode S2-30 min (short-term operation) - Extraction motor 0.55 kW, suction power 350m³/h - Weight (kg): 90 Shipping time:immedia ...

Offered out of insolvency is a ready-to-use tapping machine Manufacturer: Flott Model SB 15 GL Built in 1989 Masch.No.34177063 Specifications: Cutting capacity M2-M12 Recording MK 2 Pinol stroke 80mm Projection 200mm Chuck Bilz WFP 1 + inserts Drill chuck Röhm 0-10mm Foot switch Digital display Pinolhub Single continuous cycle Emergency stop Speeds from 80-3150rpm 380 volts Motor power 0.75KW max. dimension between table and holder 380mm Total height approx. 1700mm Accessories: 8 pcs lead screw--pitch-1.5-1.25--1.75--0.8--0.7--0.5--0.45--1.0 Operating instructions Weight approx. 200kg

bore capacity in steel (diameter): 23 mm throat: 300 mm bore stroke: 150 mm table-size: 300 x 410 mm spindle taper: MK 2 total power requirement: 1,4 kW weight of the machine ca.: ca. 315 kg dimensions of the machine ca.: ca. 700 x 900 x 1900 mm Machine has fallen over. A sheet metal cover and 2 levers of the cross lever broke off. Concentricity has been tested and is OK. Functional video available. Machine can be viewed and tested on site. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

High-quality construction The drive roller is convex (this automatically centers the abrasive belt in the middle of the roller), fully vulcanized for longest service life and best running smoothness, Tool-free and therefore quick, uncomplicated change of the sanding belt, infinitely variable height adjustment for optimal setup of the belt sander to the user, freely adjustable metal stop for optimal and safe guidance of workpieces when using the large surface grinding area, Optimized belt speed in terms of design, so that burning of the workpiece during machining can be excluded as far as possible, Motor protection switch with CEE collar plug incl. phase changer, 5-year warranty on the engine Strip length 2000 mm Belt width 75 mm Surface grinding range 600 mm Belt speed 30 m/s Colour RAL 9007 Three-phase motor 400 V 3.0/3.75 kW Machine dimensions (W x D x H) 1100 x 550 x  ...

Potato peeling machine, afloat, type 16 K

High-performance deburring system for internal and external deburring of profiles and tubes in a single operation (approx. 3 sec.) Powerful industrial geared three-phase motor, frequency-controlled, for infinitely variable settings of the required speed: 600 - 2,700 1/min, for deburring pipes and profiles with material dimensions horizontal/vertical 120 mm, Easily adjustable work table height (adjustable and lockable) for the appropriate material size adjustable, lockable infeed (carriage) of the deburring brushes to the work table by means of a handwheel with locking function. Drawer for dust residues. Sheet steel housing with prepared for connection to an external extraction system. Housing hoods foldable for changing the brushes. Machine body RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjustment screw. 3 deburring round brushes 250 x 60 / 0.35 mm corrugated st ...

Specifications: - Drilling performance - in steel 6 mm - in aluminium 10 mm - Drilling depth 60 mm - Projection spindle / column 200 mm - Drilling spindle speeds 450 - 4500 rpm - Drive 380 V / 0.6 kW - Height-adjustable drilling unit with hand crank - Table dimensions 280 x 280 mm - min. / max. distance spindle table 20 / 210 mm - Drilling unit can be swivelled laterally left + right - Space requirement approx. W 280 x H 750 x D 600 mm - Weight approx. 180 kg - with quick-action chuck 1 - 6 mm

NEW ex works Standard equipment - Threading device - Control panel with OLED display - Robust, high-quality drill head hood - LED lighting - Quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drill protection with electr. Hedge - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drill cross with push button - in tapping mode: right-left SPECIFICATIONS Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Thread cutting capacity max.: R1= M30x3,5 / R2= M24x3 / R3= M36x4 Spindle MK IV Drilling depth: 160 mm Projection: 300 mm Column diameter: 140 mm Usable table area (W x D): 590 x 450 mm Digital speed display Digital drilling depth  ...

offer 22054 Specifications: - Drilling capacity - in steel 15 mm - - in aluminium 18 mm - Drilling spindle holder MK 2 - Drilling depth 70 mm - Projection spindle / column 180 mm - Drilling spindle speeds 80 - 4000 rpm - Drive 400 V 0.45 / 0.75 kW - height-adjustable drilling table 280 x 240 mm - Distance drilling spindle / table approx. 360 mm - Distance drilling spindle / base plate approx. 410 mm - Space requirement approx. W 280 x H 1700 x D 600 mm - Weight approx. 85 kg - with : - Quick-change drill chuck 1 - 13 mm - Machine vice - div. Gebr. HSS drill 5 - 15 mm

offer 21055 Double polishing block Specifications: - Grinding wheel diameter approx. 300 mm - Grinding wheel width approx. 40 mm - Grinding wheel bore approx. 70 mm - Disc speed 1450 rpm - Working height 1100 mm -Mot. Dust extraction - Drive 400 V / 1.1 kW - Space requirement approx. W 800 x H 1250 x D 600 mm - Weight approx. 150 kg

Continuous/normal drilling capacity 18/20 mm Threading capacity M12 (depending on pitch) Lockers MK II Drilling depth 100 mm Projection 240 mm Column diameter 82 mm Usable work surface W x L 340 x 280 mm T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed indicator: Digital Drilling depth indicator: Digital Drilling depth stop: quickly adjustable stop ring Manual drill feed Table height adjustment with rack Motor three-phase current – frequency-controlled, 230 V, 0.75 kW Spindle speeds infinitely variable 30 – 3000 1/min Table work surface: 155 - 415 mm Footwork: 155 – 550 mm Machine dimensions: 355 x 705 x 1065 mm Weight: 170 kg Optional accessories: Drill package 3: with [felix] 2.0 100 Machine vice Flott [felix] 100, Quick-change drill chuck 3-16 mm (accuracy 0.17 mm), Kegeldorn MK 2 B18 and reducing sleeve MK 2 to Mk 1 � ...

Continuous/standard drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Projection (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display digital Digital drilling depth display Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase current 400V with frequency converter (kW) 1.5 Spindle/work surface distance (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED li ...

Delivery time immediately from stock! Motor three-phase current 400V with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Band saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency converter Digital speed display Stepless belt speed Balanced intervertebral discs Hard rubberized treads Hardened and ground guide jaws LED task light Height-adjustable guide arm Machine colour RAL 7005 / RAL 7035 12-month warranty for single-shift operation

Spindle speed infinitely variable electronic 40-4000 1/min Spindle: MK 2 Table height adjustment with rack Thread cutting performance max M12 Setting the thread cutting depth via digital depth display digital speed display digital drilling depth display Drilling depth stop via stop ring Feed / by hand Table height adjustment with rack Continuous/normal drilling capacity steel Ø 15 mm / 18 mm Drilling depth 70 mm Projection 220 mm Mouth diameter 70 mm Usable table area (W x L) 300x250 mm Machine dimensions (W x D x H) 420x520x850 mm Weight 65 kg max distance spindle/table/foot 300/ 370/ 420 mm Motor AC with frequency converter 230 V , 0.54 kW OPTION Drilling package B16 (No. 296570) - Vice felix 80 - Quick-release drill chuck 1-13 mm Price: € 539,- Factory warranty: 3 years Free domicile including packaging (Germany only) Delivery time: immediately from ...

Standard equipment: robust, high-quality and inclined rotary hood for easy reading of the speed LED lighting quickly adjustable and ergonomic drilling depth stop infinitely variable speed control Connection cable with SCHUCO plug (1.2 m) Undervoltage outlets Drilling protection with electr. Hedge thermal overload protection Emergency Stop Impact Button Weight in kg: 44 Motor kW: 0,45 AC 230 V Speed 1/min: 250-3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminium Ø 20 mm - Softwood Ø 40 mm - Drilling depth 60 mm - Projection 220 mm - Saeulen diameter 70 mm - usable table area (W x L) 300 x 250 mm - T-groove size number 2, distance 100 mm Dimensions width 14/26 mm - Spindle B 16 - Speed display digital - Drilling depth display: scale - Drill depth stop: quickly adjustable stop ring - Feed: by hand - FACTORY WARRANTY: 3 years - free domicile incl. packa ...