window production machines used for sale (165)

Working width from to: 80-120 mmWorking height from to: 30-80 mm: 1200-1600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 3 St.Number of tools: 8 St.Spindle diameter: 50 mmDimensions (L/W/H): 4250x1850x2300 mm! MACHINE FUNCTIONALLY CHECKED AND READY FOR DEMONSTRATION Technical description in RUSSIAN, more machine pictures as well as machinevideos - if available - at the end of this description as attached files ! # 6988 Weinig Univar 6 CNC .. Technical details summary (please ask for possibly more included equpment) .. 1st profiling spindle: .. > spindle rotation direction: clockwise and reverse for rip-off free outside profiling of sashes > position: vertical right > number of tools: 1 pcs.> length of spindle: 120 mm> number of revolutions: 6000 rpm> spindle diameter: 50 mm> tool diameter max.: 232 mm> engine: 11 kW2nd profiling spindle: .. > position: vertical right > number of tools: variabel, CNC > length of spindle: 320 mm> spindle stroke vertical: variabel, CNC > number of revolut ...

voltage: 220 Vcollets: 8mm Motor output: 1,8 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): - mmarm length: 1600 mmworkpiece height max.: - mmtaper MK: 5 total power requirement: - kWweight of the machine ca.: 3 tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: max 1500 mmtaper MK: 5 weight: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 1200 mmtaper MK: 4 bore cube: ja weight: 2,7 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tenoning spindle: 1 St.Number of milling agregates: 4 St.Spindle diameter: 50 mm1 used Weinig Unicontrol 6 window system----------------------------------------------Manufacturers description:For the production of individual parts, elements, and small series.Spindle arrangement:One cross-cutting saw, one single-sided tenoning and slotting spindle,one right-hand profiling spindle, one tenoning and slotting spindle, andprofiling spindle suitable for holding multiple tools stacked on top of eachother, with pneumatic spindle movement.Slotting table with motorized table movement and automatictransfer to the continuous, chainless rubber roller feed of the profiling unit.Feed height adjustment manually.Workpiece clamping via 2 pneumatic clamping cylinders.Length stop with scale and magnifying glass for frame or sash externaldimensions.Tool positions (longitudinal and transverse machining)contro ...

Tenoning spindle: 2 St.Number of milling agregates: 7 St.Spindle diameter: 50 mmcontrol: Weinig, PC-Nexus Weinig Unicontrol 12with radial and axial CNC spindles as well as VARIO table and milling carriage Machine dismantled professionally and in our warehouse in 73447 Oberkochen.Video and pictures were taken before dismantling.Technical data summary(please inquire about any additional accessories included) crosscut saw > Electronic crosscut saw, horizontally infinitely adjustable> Number of tools: 1 piece.> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Laser directional light to detect the saw section> Axial adjustment path 150 mm NC axis, electronically infinitely variable> Radial pneumatic adjustment path 8 positions for e.g. edge rounding from aboveRounding aggregate > Position: horizontally below> Motor power: 1.5 kW> Spindle diam ...

Working width: 3450 mmWorking height: 2000 mmNumber of cylinders: 5 St.loading dimensions L x W x H: 3600 x 1200 x 2720 mmHess Multipress Perforated Plate PressFor all sloped, segmental, and round-arch windows and doors.Also for interior work or frame construction.For gluing staircase block joints and much more.Largest working area approx. 3450 x 2000 mmExternal dimensions approx. 3600 x 1200 x 2720 mmThe vertical perforated plate press is constructed of heavy-duty, torsion-free steel.Thanks to its simple, robust, and economical design,it has a long service life.The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking.5 plug-in hand hydraulic cylinderson a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke4 fixed indiv ...

Tenoning spindle: 1 St.Number of milling agregates: 0 St.Spindle diameter: 40 mmSmall window production consisting of:W.--------------------------------------------------1) Haberkorn FZS1 slotting machine2) Okoma SF3F table milling machine3) Oertli tool for the Haberkorn and Okoma machines Wooden windows 1 set IV 68/78/88 and 1 set wooden aluminium windows IV 68/78 built in 20114) Götzinger OBM Plus corner bearing and olive drilling machine,Maco MultiMatic fittings--------------------------------------------------Technical manufacturers description:- Haberkorn FZS1 slotting machine with automatic feed,-stepless height adjustment D 40 mmCutting-to-length saw:-Spindle arrangement: top-Three-phase motor: 3 kW-Spindle diameter: 30 mm-Speed: 2800 rpm-Saw blade diameter: 400 mm-Automatic brake with speed monitoring-Horizontal pneumatic positioning, manually adjustable-Protective and extra ...

Dimensions (L/W/H): 7600x1400x1800 mmWeight: 2950 kgTotal power requirement: 9,15 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3000x800x2100 mmWeight: 1250 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width from to: 100-400 mmWorking height from to: 20-150 mmDimensions (L/W/H): 2200x1650x1600 mmWeight: 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3960x1400x1800 mmWeight: 1200 kgtotal power requirement: 9,15 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x800x1350 mmWeight: 370 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1400x1800 mmWeight: 2200 kgtotal power requirement: 9,15 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2160x1080x1650 mmWeight: 1500 kgTotal power requirement: 12 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6000x1400x1800 mmWeight: 2500 kgtotal power requirement: 8,05 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamp length: - mmClamp width: - mm0: - NmGlass bead nailer 2 P Jumbo automatic E.C. - new -Your advantages:- The corner connections are closed- No open glazing bead joints- There are no color differences when painting- The glazing bead frames are easy to assignClamp corner joining machine 2PJumbo Automatic E.C. for clamping glazing bead frames.Choice between automatic and manual operation,With angle system, clamping device from above and frontPressure can be regulated separately.Inserting parallel and superimposed onesClamps possible via electronic programming control.Stapler can be mounted on a suitable work table,Operation via foot valve.--------------------------------------Price in this version on request!Plus packaging/shippingAdditional prices: ---------------------Movable work tableheight adjustable from 700 - 1000 mm,2 pieces of support bars can be plugged in1000 mm long, 2 piec ...

Clamp length: , mmClamp width: , mm0: , NmPainting aid for painting the sash and glazing bead frame at the same timeRU-LH painting aid for glazing bead framesfor processing staples L=50mmLength 700 mm, width 500 mm, working heightadjustable from 700 - 1200 mm. At the 4 corners1 bracket is placed on each of the glazing bead frames.The positioning is done diagonally and in such a way thatthe brackets protrude approx. 35 mm from the wood,When pressed into the sash frame, aclamping. The glazing bead frame is ready for paintingPositioned at a distance of approx. 20 mm in front of the sash.After drying or before installing the sashthe glazing bead frame is flush with the sashpressed and only removed again before glazing.The clamps can then be pulled out again by handbecome. Stand frame with support table vertical 85°,adjustable in inclination. 2 pieces compensation framesfor different glazing ...

Tenoning spindle: 1 St.Number of milling agregates: 4 St.Spindle diameter: 50 mm# 6971 Weinig Unicontrol 6--------------------------------------------Technical Specifications Summary(Please inquire about any additional accessories included)Item 1: Crosscut Saw-------------------------------------------> Number of tools: 1 pc.> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Maximum tool diameter: 400 mm> Motor power: 3.7 kW> Laser alignment light for detecting the saw cutCNC-controlled length stop--------------------------------------------> Length 3,500 mm> Electronic length stop including positioned crosscut sawItem 2: Tenon and slotting spindle---------------------------------------------> Number of tools: 3 (stroke 2 x 100) mm) or 4 (stroke 3 x 80 mm)> Tool clamping length: 320 mm> Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm> Spindle speed: 3000 rpm>  ...

Working width: 230 mmWorking height: 15-120 mmNumber of spindles: 2 St.Weinig Hydro Planer Type Uniplan 23-------------------------------------------------------------------- Machine was factory overhauled by Weinig in 2024.Description:For two-sided horizontal woodworking with two working spindles.Spindle arrangement: horizontal, bottom and top.The two horizontal spindles are equipped with hydraulically tensioned counterbearingswithout axial adjustment. Built-in straight jointers on both spindleswith automatic stone feed, remotely controlled with the hood closed.Machine with continuous, chainless feed, equipped with rubber rollers.Electric up/down adjustment of the spindles according to a mechanical digital display(SIKO).On/off switch for limiting the up/down adjustment. Feed roller pressurepneumatic. Stops and table tops are not adjustable. Machine withsteel table tops.Machine with full ...

Tenoning spindle: 1 StNumber of milling agregates: 4 St.Spindle diameter: 50 mmControl: Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled-------------------------------------------------------- ------The machine was factory overhauled by Weinig in 2024.The control system was also upgraded to a Siemens S 7 677 C,with a new membrane panel Touch.With the following machining units:Crosscut saw--------------------------------------------------------------with laser alignment light, motor power 3 kW, spindle diameter 40 mm,spindle speed 3,000Axially adjustable via NC axisRadial pneumatic adjustment to 8 positions for edge rounding from aboveUnit from below for edge rounding-------------------------------------------------------------A xially adjustable with crosscut sawTenon and slotting spindle------------------------------------------------------------- ...

Working width: 3500 mmWorking height: 2550 mmNumber of cylinders: 6 St.loading dimensions L x W x H: 4500x950x2900 mmHess Speedy frame press--------------------------------------will be checkedInsertion dimension / pressing length max. 3,500 mmInsertion dimension / pressing height max. 2,550 mmSliding carriage for width adjustment locking in 50 mmDouble hole grid systemElectric height adjustment of the long-stroke cylinders (hydraulic)Insertion height of the abutment plates can be preselected in 4 positions3 vertical printing cylinders stroke 1000 mmPressure force per cylinder 2000 kN / 20000 N3 horizontal printing cylinders stroke 80 mmPressure force per cylinder 1250 kN / 12500 NPrinting plate depth 100 mm width 140 mmGrid for cylinder fixation/rear bearing 50 mmMedium pressure beam with shut-off valveFinal pressure switch-off and pressure controlControl and pressing process in touch b ...

0: ja Working width: 3000 mm0: nein Eder + Mueller fitting centre for windows---------------------------------Sale on behalf of the customer from the customers location.The machine was in use until closing and is now at the customers warehouse.Previous hardware: Maco Multi Matic (other hardware is also possible)Technical manufacturers description:---------------------------------Table height and working angle mechanically adjustablewith permanently mounted hardware bearingSash stop table, length 3,000 mm, with fixed hardware bearingFelt-bonded support12 pivoting counterholders for hanging the sashesHardware detection for centered and constant gear position1 storage unit with 4-way air connectionwith automatic special screwdriverwith pneumatic depth stop6-way turret stop for different screw depthsPneumatic height adjustment for 6 screw levelsAutomatic screw feedManual insertion for a seco ...

-) Working area X: approx. 3,300 mm -) Working area Y: approx. 1,300 mm -) Working area Z: approx. 300 mm -) Main engine: approx. 7.5 kW -) Tool change points: 2 x 24 pieces Fix and 1 x 10 with you -) Lock box unit: permanently installed -) Machine table: console table -) Positioning aid: Yes -) Workpiece special clamping system: Yes -) Software: SCM XILOG 3 -) Number of milling spindles: 1 piece -) Speed: 18,000 max rpm. -) Torque support: Yes -) Tool clamping system: HSK-F63 -) Design: boom machine -) Vacuum pump: Yes -) DXF interface: Yes -) Chip conveyor belt: Yes -) CE mark: J Yes -) Total connection: approx. 22 kW -) Weight: 9,600 kg

) for double pot MAKO-DT/130 ) with two drills ) incl. automatic Mittelbohreinstellung ) Cycle time per frame is less than 15 seconds ) Clamping and centering device with pneumatic cylinders, which are vertically and horizontally ) this machine streamlines the beating of wood window

Window machining centerDimensions of workpieces:Workpiece length: 270 x 3000 mmWorkpiece thickness: 30 - 85 mmWorkpiece width: 180 mmEquipment:Electric length stop Crosscut saw, diameter 400 mm, motor 3 kW Tenoning spindle, diameter 50 mm, useful shaft length 600 mm, motor 7.5 kW3 x profile shaft, diameter 50 mm, length 600 mm, motor 7.5 kWGlazing bead saw, diameter 200 mm, effective shaft length 20 mm, motor 2.2 kWFeed device 1.5 kW, roller diameter 120 mmOertli tools included profile 68, 78, 82

Key data: 2 KW, 40 mm

gebr. Spigot cutting and slitting machine with lifting spindle PANHANS TYPE 261H YOC 1993 Manual / automatic operation Lifting spindle autom. Changing the splintered wood Longitudinal stop LAS (HOFFMANN) Pneumatic workpiece clamping Sliding carriage length: 2.50 m Shortcut saw: Motor power: 2.5 kW Max. saw blade diameter: 400 mm max. cutting height: 130 mm Lateral adjustment: max. 100 mm Suction nozzle: 80 mm Milling machine: Motor power: 7.5 kW Milling mandrel: 40 mm Max. tool diameter: 350 mm Suction nozzle: 200 mm Largest tenon length: 140 mm Clamping height: 235 mm Lifting height: 120 mm Rolling table height adjustment: 80 mm Engine brake All pneumatic hoses renewed Weight: approx. 680 kg Manufacturer information

Ruchser Side Trolley Type RU-WAL Year of manufacture 1997 Side trolley with tool tray and tool feeder For compressed air and electrical appliances Boom for equipment suspension 2500 mm long With 4 compressed air and 4 electrical connections each 2 shelves A row of storage boxes for screws and other small parts Drawer With 4 swivel castors with a diameter of 150 mm, 2 of which have a stop device