welding machines used for sale (1,771)

Offer 19013 Specifications: - Rated power at 50% ED 16 kVA - Continuous power 13.5 kVA - Max. welding power 63 kVA - Weld values sheet steel 3.0 + 3.0 mm - Projection approx. 100 mm - Arm spacing 130 mm - Electrode force 280 daN - Air consumption at full load of the pliers approx. 6 l/min - Cooling water volume approx. 8 l/min - Connection / connected load 400 V / 63 kVA - Space requirement approx. W 500 x D 1000 x H 500 mm - Weight approx. 50 kg - with: - separate control unit AKZENT T 504-1 - Hanging bracket with gimbal

weight max.: 5,0 tworkpiece diameter: 303 x 2438 mmfeed speeds infinitely variable: 0 - 1745 mm/mingear diameter: 305 mmgear width: 100 mmtotal power requirement: 0,5 kWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 1,5 x 1,05 x 0,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 180 mm: 10 Kg: 5 Kgchucking diameter: 65 mmturning speeds: 2 - 20 stufenlosswivelling range: 90 Gradtilt adjustment: manually/mechanicall: manuell connected load frequency: 230 Vweight of the machine ca.: 18 Kgdimensions of the machine ca.: 300 x 300 x 300 mwelding turntable with- Quick chuck 65mm- foot switch- tilting/pivoting by hand- Speed continuously adjustableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Burn-Drilling Rig Panel Processing Center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC Control Power source Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Auto. Revolver Tool holder: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring scribing marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x400 mm with restriction ) Minimum dimensions of finished parts: 80 x 80 mm Sheet weight max.: 2,600 kg and 650 kg/m Feed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-position cross conveyor Number of cars: 2 pliers NC feed carriage, placed on the side 4 collets (2+2) 3 Short Stroke Cross Conveyors Working height: 1,000 mm Removal page: Discharge roller conveyor with lowerable unloading table with chute in Material c ...

Key data: 80 kVA, 350 mm, 600 kp

Rated power at 50%ED: 80kVA Short-circuit current: 45.4kA Electrode force: 100-600daN / single stroke Projection: 350mm --- Welding control: MPS 100mono (8 times, 1 program) --- Incl. additional options: - Pre-mounted electrode holder -Foot switch - Adjustment device - Electronic flow monitor - Main switch + transformer tap changer 4-way --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

table length: 1200 mmtable width: 700 mmtable height: 900 mmtable load capacity: 250 Kgweight of the machine ca.: 36 Kgdimensions: 1,2 x 0,8 x 0,85 mSiegmund workbench incl. accessories- consisting of screw clamps, manual clamping bolts, surface clamping bolts and angle bracket- Frame made of aluminum profiles- Working height 900 mm- Surface made of aluminum table profiles- Drill hole Ø 16 mm- Hole spacing 50 mm- Hexagon groove HX8- Hexagon groove distance 50 mm- When clamping aluminum parts, the bolts may only be tightened hand-tight.- For clamping: Manual clamping bolt 160514 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 50 mmangle adjustable from - to: 25-55 Gradspeed: 3 m/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

8008 CM Art. item / Anno/Year: 06-01/90, Hz 50, 380 V, 100 KVA 50%, 250 KVA, 8200 Amp 100%, 36000 Amp short circuit, 710 da N pressure, 300 l/h H2O Water Cooling - Made in Italy The spot welding machine was used weekly about 10 years ago and was fully operational at that time. The machine can be connected at any time and can be checked by qualified personnel by the potential buyer with the product to be manufactured in the future. The machine can be picked up at the current location – as it stands – without warranty and other services for 2800.00€ VHB or shipped plus shipping costs. Alternatively, we can have the machine checked by external specialists, in which case the price is approx. 4500,00€.

weight max. in kg: 2500 kgWorking height minimal: 350 mmWorking height maximum: 1850 mmmax. torque: 3000 Nm0: 1 U/minadjustment speed: vertikal 560 mm/minvertical adjustment: 1500 mmbaseplate diameter: 600 mmrotation movement: 0,75 kWstroke drive: 1,85 kWheight of the plant: 2505 mmweight: 1160 kgVideo available on our website.: Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory.Syncrolift features two main axis: Electrical elevation/descent, and Electrical 360° left/right rotation.Due to its special design, the column po ...

Machine Type: Electrode Inverter Welding Rectifier Make EP-Systems Type Cycle 60.16 Connection voltage 230/400 V Adjustment range 1 – 160 amps Duty cycle 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter through built-in fan Portable assembly system design Fuse 26 Ampere Dimensions L x W x H 420 x 190 x 300 mm Weight 8 kg Age 10 years Condition workshop-tested new incl. UVV test report Scope of supply welding system with the following accessories: 1 piece ground cable 16 sqmm, 4 mr. long 1 piece electrode cable 16 sqmm, 4 mtr. long 1 piece of hand shield 1 piece facing glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 1 piece mains plug 230  ...

Machine Type: TIG Inverter Welding Machine Gas-cooled DC system Make EP-Systems Type TopTIG 160 HF Connection voltage 1 x 230 Volt Adjustment range 1 – 160 amps Duty cycle 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter through built-in fan Cooling burner gas-cooled Portable assembly system design Fuse 16 Ampere Dimensions L x W x H 410 x 240 x 320 mm Weight 10 kg Age 6 years Condition workshop-tested new, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG torch 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box complete Equipped 1 Piece Instruction Manual Warranty: 6 months from the date of delivery Original price  ...

Key data: 6 Meter

Machine Type: Plasma Inverter Cutting Machine Make EP-Systems Type M 40.60 Connection voltage: 1 x 230 volts, setting range: 15 – 40 amps, duty cycle: 60 % ED at 40 amps 100% ED at 30 amps Current adjustment infinitely variable max. quality cut 2 mm max. cut-off cut 5 mm Cooling inverter through built-in fan Cooling burners by compressed air Portable assembly system design Fuse 16 amps Dimensions L x W x H 470 x 250 x 250 mm Weight 10 kg Age 5 years Condition workshop-tested new incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece plasma torch PH-70, 6 mtr. long 1 piece ground cable 1 piece compressed air hose 1 Piece Instruction Manual Warranty 12 months from the date of delivery Original price €1,750.00 + VAT Price kpl. with the above accessories €159.00 + VAT _____________________________ ...

Specifications: Lifting capacity: 100 tons 1-side driven Smallest diameter: 480 mm Largest diameter: 4800 mm Diameter rollers: 700 mm Motor power: 2 x 0.75 kW Rotation speed infinitely variable Side rollers for moving on rails Dimensions (length x width x height): approx. 3900 x 1300 x 1300 mm Weight: approx. 7 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Specifications: Clamping plate dimensions: 2050 x 1000 mm Panel thickness: 170 mm T-slots: 15 / 25 mm Dimensions (length x width x height): approx. 2050 x 1000 x 170 mm The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Machine Type: MIG/MAG Inverter Welding Machine Make Merkle Type MobiMIG 180 K Serial No. 89.754 Connection voltage 1 x 230 Volt Adjustment range 25 – 180 amps Duty cycle 20% ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner gas-cooled Portable assembly system design Wire Feeder 2-Roller Gearbox Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special Accessories ColdMIG Welding Process E-welding, MIG soldering, cored wire welding Weight 17 kg Age 12 years Condition workshop tested, very good incl. UVV workshop test report Scope of supply welding system with the following accessories: 1 piece of welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick sp ...

Complete module for supply of two welding workstations with Integrated welding fume extraction from Teka (welding fume separation class W3, with automatic filter cleaning) for steel. Movable product. Small appliances (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively, extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled included 1 frame 2 Boom arms AGA 2020 1 tool cabinet 1 gas bottle holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding machines of the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table, which can be seen in pictures 5 &6, can be purchased separately! Currently, a trade fair return and a used welding workstation (SAP) are available. - We loo ...

Offer 24508 Specifications: - Load capacity 100 kg - Face plate diameter 500 mm - Passage opening 155 mm - Manual face plate infinitely variable left + right tilt - Rotational movement infinitely variable mot. Adjustable - Right + Left Rotation - E.- Footswitch for start - stop - Table height in horizontal position approx. 940 mm - 3 cheek chuck - Drive 220 V - Space requirement approx. W 750 x H 940 x D 750 mm - Weight approx. 100 kg

Offer 24518 Specifications: - Load capacity 150 kg - Pick-up crosses + mounting bolts - Height of mounting bolt in horizontal position 1350 mm - Diameter of mounting bolt 55 mm - Rotary movement infinitely variable - Right.- Counterclockwise rotation - Drive 400 V / 3.0 kW - Height of mounting bolt in horizontal position 1350 mm - Space requirement approx. W 600 x D 1200 x H 1350 mm - Weight approx. 150 kg

Offer 24820 Specifications: - Infinitely adjustable cutting current 30 - 100 A - Duty cycle 80 A / 100% ED - 100 A / 80% ED - max. cutting thickness - steel approx. 32 mm - Alu approx. 25 mm - Stainless steel approx. 55 mm - Air connection 5 bar - Gas mixing plant - Connection 400 V / max. 14.5 kVA - Space requirement approx. W 800 x H 1650 x D 700 mm - Weight approx. 250 kg

Offer 24604 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 1 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg

Offer 24603 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 10 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg

Offer 24600 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 14 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg

Offer 24589 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 14 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg

Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG 3000 K Appendix No. 132.175 Connection voltage 3 x 400 volts Adjustment range 25 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 445 x 760 mm Weight 120 kg Age 3 years Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of welding gloves 1 Piece Instruction Manual Warranty 24 months from ...

length: . mmheight: . mmvolt: U2 104 Vampere: I2 60 Avolt: U1 400 Vvolt: U0 320 Vampere: I1 18-26 AManufacturer number.32310819EC/EN 60974-1See type plateThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 500 machines in stockMore than 8,500 m² of storage space, crane capacity 70 tMore than 10,000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 60 tworkpiece diameter: 6000 mmgear diameter: 680 mmgear width: 230 mmDistance of shafts: 900-3500 mmaxis height: 550 mmtotal power requirement: kWweight of the machine ca.: 4,5 (9 ) tdimensions of the machine ca.: mLoad capacity per piece 30 t load-carrying along 60 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 tworkpiece diameter: 7000 mmroll diameter - bore: 500 mmWheel width: 180 mmDistance of shafts: 100-3000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current capacity: 16 kVAthroat: . mmcontact pressure capacity: . kptotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 4500 mmfloor-plate width: 1600 mmfloor-plate height: 370 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 4500 mmfloor-plate width: 1600 mmfloor-plate height: 380 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.