welding machines used for sale (1,772)

table diameter: 1600 mmtable load: 6 tswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/min: 12000 Nm0: 1,5 / 2,2 kWwelding current: 700 Ampere• Self-locking gear, therefore no forward and backward at eccentric load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Dreh- und kippbar : für Schweißpistole oder : für Plasma condition: nicht geprüft Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mmtable load: 2,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 6000 Nmtable pass: 200 mmwelding current: 700 Amperetotal power requirement: 1,1 + 2,2 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mmtable load: 5000 Kgswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/minheight adjustment: 1300 - 2050 mmmax. torque on the faceplate: 10000 Nmengine output: 1,5 / 1,5 kWwelding current: 1000 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MIG/MAG hose package-Dinse: DIX MSZ 2-304-Length: 3.0 m-Water cooled-Weight: 2.8 kg

welding current: 30 - 200 Aconnected load frequency: 230 Vweight: 3,6 kgDimensions (LxWxH): 290 x 135 x 2600 mmScope of delivery:TIG welding machine Buddy TIG 160Electrode and earth cable 3mTIG torch ET 17 4mGas hose with union nut The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MIG/MAG hose package-Dinse: DIX MC2-Length: 3.0 m-Dinse: plug-Water cooled-Price: per piece-Number: 1 pieces-Weight: 2.7 kg

welding current: 15 - 40 Acutting capacity: 1 - 16 mmopen-circuit voltage: 96 VRequired air-pressure: min. 4 barconnected load: 3,6 kWconnected load frequency: 230 Vweight: 9,0 kgDimensions (LxWxH): 371 x 153 x 232 mmExhibition machine Inverter plasma cutter with accessories:Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressuregauge, Mask and brush.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 020448 plasma nozzle -for: Hypertherm HT2000 -Number: 4 available -Price: complete -Total weight: 0.2kg

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: diffuser Hypertherm 020607 -for: Hypertherm HT2000 -Number: 2 available -Price: complete -Total weight: 0.1kg

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 020608 plasma nozzle -for: Hypertherm HT2000 -Number: 1 piece available -Total weight: 0.1kg

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 120182 plasma nozzle -for: Hypertherm HT2000 -Number: 2 available -Price: complete -Total weight: 0.2kg

Wire feed case for inert gas welding device, shielding gas device, wire feed case-Manufacturer: Ess wire feed case, water-cooled-Type: DVK 300-3-Accessories: hose package-Dimensions: 750/410/H430 mm-Weight: 32 kg

Accessory trolley for welding table, 3D welding and assembly tables-with: shelves for the accessories-Number: 1x tables available-Price: per piece-Dimensions: 1060/650/H1260 mm-Weight: 52 kg

Flame cutting machine, plasma torch - Designation: plasma electrode Hypertherm 402 120667 -Max. Load: 200 A -Diameter: 13mm -Length: 41mm -Number: 9 pieces available -Price: complete -Total weight: 0.45kg

Flame cutting machine, plasma torch - Designation: plasma electrode Hypertherm 402 120667 -Max. Load: 200 A -Diameter: 13mm -Length: 41mm -Number: 9 pieces available -Price: complete -Total weight: 0.45kg

Plasma hose package, welding torch, MIG/MAG torch-ESAB type: PSF 410 Cw-Hose package: water-cooled-Spring contact-Length: 3.25 m-Price: per piece-Number: 2 pieces-Weight: 3.2 kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 22 pieces available -Total Cost -Total weight: 1.1kg

Plasma hose package-Hose package: water-cooled-Handle: damaged-Length: 10 m-Weight: 6 kg

number: 24 Positionenweight: 22 kgcondition: neu 0Basic set 1 / 24 piecesfor table top thickness 15 and 25mm4 clamps, clamping height 300mm, variable projection8 clamping bolts2 pieces stop 100mm4 pcs. stop 150mm2 pieces stop 225mm1 piece torch holder1 piece perforated brush 30mm1 piece Separating Lotion 500ml1 pc. Welding table cleaner on a natural, biological basis 500mlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Flame cutting machine, plasma torch -Designation: Plasma Electrode Hypertherm 043 020415 -Diameter: 13mm -Length: 41mm -Number: 1 piece available -Total weight: 0.05kg

Flame cutting machine, plasma torch -Designation: Plasma Electrode Hypertherm 043 020415 -Diameter: 13mm -Length: 41mm -Number: 1 piece available -Total weight: 0.05kg

MIG/MAG hose package extension, intermediate hose package-Length: 16.0 m-Plug-Water cooled-Weight: 16 kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD PM -Cutting nozzle 6 - 10 mm 5 bar -Cutting range: 6 - 10 mm -Gas: propane methane -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 5 pieces available -Total Cost -Total weight: 0.25kg

Welding smoke filter, welding smoke extraction-Suction tube: flexible-Diameter: 230 mm-Length up to: 7 m-Price: per piece-Number: 3 pieces-Dimensions: 1250/290/H270 mm-Weight: 22 kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 4 bars -Diameter: 19mm -Length: 47mm -Number: 43 pieces available -Total Cost -Total weight: 2.15 kg

Clamping plate, welding table, welding table, straightening plate, perforated plate-Dimensions: 2005/1500/80 mm-Table height: 800 mm-Plate: solid-Holes: 50 x 50 mm-Cast plate-Vice-Dimensions: 2100/1700/H1030 mm-Weight: approx. 2000 kg

weight max.: 1000 Kgworkpiece diameter: 20 - 800 mmdrum diameter: 200 x 50 mmfeed: 80 - 1600 mm/mintotal power requirement: 0,23 kWdimensions of the machine ca.: 2 Stk. 0,45x,039x0,33 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 10-20 mm acetylene 6 bar -Cutting range: 10 to 20 mm -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 24 pieces available -Total Cost -Total weight: 1.2kg

clamping range of chuck: 120 - 380 mmheight: 95 mmdaylight: 170 mmexternal diameter: Futter 400 mmexternal diameter: Spannhebel 600 mmweight: 26 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.