welding machines used for sale (1,748)

DALEX PMS 10-4 & COHLINE Water Chiller DALEX, type PMS 10-4 powerful and robust industrial spot welding machine in a ready-to-use set with a matching COHLINE water cooling unit. Highlights & Condition: Extremely low mileage: The built-in DALEX MPS 100 digital control system shows an original odometer reading of only 13,282 cycles! For an industrial machine of this caliber, this is as good as new and guarantees minimal wear and tear. High electrode force: This model offers a powerful contact pressure of up to 690 daN for perfect spot welds even on thicker sheets. Including cooling: Thanks to the powerful COHLINE cooling unit (5.8 kW), the machine is immediately ready for permanent industrial shift operation without overheating. Flexibility & Safety: Equipped with a key switch for easy choice between control by footswitch or the two-hand safety console. Technical  ...

wire electrode, welding wire, welding wire -Manufacturer: Elgar, started roll of MAG wire electrode -Type: Cromacore DW-309L O1.2mm -Dimension: O 300/100 mm -Weight roll: 10.1 kg

Offer 26289 Technical data approx. : - CNC flame cutting machine with 2 burners as shown - 2 burner heights + tilt adjustable - Track gauge approx. 4.2 m - Track length approx. 7.5 m - Track height approx. 0.5 m - Space requirement approx. L 8 x W 7.5 x H 2.3 m - Weight approx. 3 T - Without support table

A central welding fume extraction system is offered. Airflow: 30000m³/h, airflow: 30000m³/h, motor power: 30kW, compressed air connection: 6-8bar, max. static pressure: 2500Pa, duty cycle: 100%, control: PLC. The system is equipped with 2 spark traps and various ductwork components (extraction arms and hoods not included). An inspection is possible by arrangement.

An industrial welding robot is offered. Reach: 1450mm, payload: 5kg, operating hours: 2213h, welding power source: ESAB AristoMig 500W, max. welding current: 500A, duty cycle: 60% at 500A/100% at 400A, controller type: IRC, robot variant: 1600-5/1.45, controller: IRC. Equipment: ESAB AristoMig 500W welding power source, IRC control cabinet, linear axes/positioner tracks. Weight: approx. 500kg, overall dimensions X/Y/Z: approx. 1200mm/800mm/1600mm. An inspection is possible by arrangement.

Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible.

Max. load capacity: 30t/set, min. workpiece diameter at 90°: 466mm, max. workpiece diameter at 30°: 11457mm, roller dimensions: 520mm×355mm, roller covering: rubber, max. speed: 1295mm/min, motor power: 2×1.5kW, weight drive unit/idler unit: 1300kg/700kg. Documentation available. An on-site inspection is possible.

Welding power source: Starmatic 1003 DC, max. welding current: 1000A at 100% duty cycle, lifting column height: 4850mm. Including flux tray, rail and vessel turning device. Documentation available. An on-site inspection is possible.

Laser source: Bystronic BLT 3500 Turbo, laser power: 3500W, wavelength: 10600nm, max. sheet weight: 160kg/m². Base machine weight: approx. 7000kg, laser source weight: approx. 1600kg. Documentation available. An on-site inspection is possible.

Manufacturer and model: iDEAL BAS 050-11 Rated power (ED 50%): 4.5 kVA Secondary voltage: 2.6 – 4.4 V (6 stages) Clamping force: 10 kN (hydraulic) Maximum compression force: 2.2 kN Iisc Hq E Rrszqdkxjvef Machine weight: approx. 180 kg Hydraulic tensioning, operated via foot switch Pyrometer (GTR): yes (temperature display on the touch panel) Connection voltage: 380 – 419 V Bi-metal/carbide saw blades: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Blade dimensions: 6×0.4 – 30×0.6 mm Blade steel S235JR: max. cross-section 75 mm² Blade steel X5CrNi18-10: max. cross-section 40 mm² Pyrometer / GTR: The integrated pyrometer (GTR) enables contactless temperature measurement during the annealing process. The target temperature is pre-defined in a recipe and displayed on the panel – the annealing cycle en ...

An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement.

Welding rectifier, standard: EN 60974-1, VDE: VDE 0544, mains connection: 3~/400V/50Hz, fuse protection: T25A, open-circuit voltage: 76V, max. welding current: 400A, protection class: IP23, insulation class: F, cooling method: AF-forced air cooling, weight: 214kg. An on-site inspection is possible.

Working area X/Y: 1500mm/3000mm, plasma source: NERTAJET HP120, control: DIGISAF 100, max. cutting capacity steel/stainless steel/aluminum: 20mm/15mm/20mm, wet and dry cutting possible, extraction system available. Documentation available. Inspection possible by arrangement.

Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, dust collectors, welding fume extractors -Manufacturer: Donaldson Torit, mobile welding fume extraction / dust collector type PT 1000 -Drive: 1.1 kW -Max. volume flow: 1100 m³/h -Extraction arm: Ø 165 mm x 2210 mm -Transport dimensions: 1200/620/H1645 mm -Weight: 105 kg

Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Welding fume extraction: welding fume extraction arm -Extraction arm: Ø 200 mm x 4700 mm -Transport dimensions: 2490/800/H290 mm -Weight: 31 kg

A TRUMPF CNC laser tube cutting system is offered. Max. tube length/outer circle diameter: 6500mm/150mm, Z-axis travel: 170mm, laser power: 2700W, max. material thickness steel/stainless steel/aluminum: 8mm/5mm/4mm, operating hours: 86567h, laser operating hours (laser on/beam on): 81557h/27316h. Including PRS 3001 part-removal station with brush table and LoadMaster Tube with bundle magazine LD 6000. Overall dimensions X/Y/Z: approx. 16000mm/8200mm/2800mm, weight: approx. 17.5t. An on-site inspection is possible.

Welding machine Fabr. Migatronic Typ. Automig 273

Offered for sale is an Esab CNC plasma cutting machine. Track gauge: 3000mm, max. cutting width: approx. 2500mm, max. positioning speed: approx. 25m/min, cutting process: plasma, control: Esab CNC control. Machine dimensions X/Y/Z: approx. 4425mm/1676mm/1930mm. Inspection by appointment possible.

Gas metal arc welding machine, arc welding machine, MIG/MAG welding machine, pulse welding machine, inverter welding machine, impulse welding machine -Manufacturer: Ess, MIG-MAG shielded gas welding machine -Type: E1-3300 -Max. welding current: 330 A -Features: Water-cooled, remote control -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 1020/520/H980 mm -Weight: 116 kg

Migatronic PI 200 DC HP TIG/TIG Welding Machine The PI 200 DC HP is an easy-to-use 200 TIG inverter for welding steel and stainless steel and others, materials that can be welded with direct current (DC), with pulse function. MMA welding is also possible with the device. TIG-A-Tack™ - Synergy Plus HF (ignition with HF) LIFTIG® (ignition without HF) Current range 5-200 A Duty cycle 100 %/20 °C (TIG) 170 A | 160 A Duty cycle 60 %/20 °C (TIG) 200 A. Mains voltage 230 V Synergy Plus: Synergy Plus is a special pulse function for TIG DC welding, in which the machine dynamically controls all higher-level pulse parameters. TIG-A-Tack®: With the TIG-A-Tack® function, you can create extremely small and precise tack welds on stainless steel without forming gas. They significantly reduce the risk of weakening the metal's anti-corrosion properties or its shape and strength.  ...

TIG-TIG Welding Machine Cebora Power TIG 1640 DC HF DC TIG/MMA welding power source. Inverter Welding Machine (MMA) with HF and Lift Arc Ignition 2-step/4-step selection button. Welding current range TIG (DC): 5 A – 160 A Welding current range MMA: 10 A – 140 A Gas inflow time (post-gas) can be controlled. Current reduction (slope-down) can be adjusted. Connection for remote controller / foot pedal or up/down burner. Mains voltage: 230 V Areas of application & details: TIG Welding Machine Cebora Power TIG 1640 DC HF, Constant DC Source with INVERTER Technology, TIG/TIG Welding Machine, TIG Welding Machine, TIG DC Inverter, Shielded Gas Welding Machine, DC-TIG/MMA Welding Power Source, Electrode Manual Welding (MMA), Arc Welding Machine.

TIG-TIG Welding Machine Oerlikon DTG 201 Manufacturer: Oerlikon Schweißtechnik GmbH, Eisenberg/Palatinate. Made in Germany. Handy and portable TIG DC inverter system, also suitable for welding with rod electrodes. 380 volts. Welding performance: 200 A / 10.2 V at 60% ED. 160 A / 34 V at 100% ED. HF ignition. Pulse rate and pulse width adjustable. Dot time controller 0.5 to 5 sec. TIG full program with starting current, current increase, Fundamental and pulse current, Current lowering and crater filling current. Automatic throttle shut-off. With hosepack, TIG welding torch and ground cable. Without gas bottle. Areas of application & details: TIG-TIG welding machine Oerlikon DTG 201, TIG/TIG welding machine, industrial TIG welding machine, TIG DC inverter, arc welding machine.

TIG-TIG Welding Machine Oerlikon DTW 251 A The device is untested. A suitable hose package is missing. The Oerlikon TIG welding hose shown does not have the correct connections, an adapter is missing (TIG connection adapter for the old Oerlikon central connection) Manufacturer: Oerlikon Schweißtechnik GmbH, Eisenberg/Palatinate. Made in Germany. Technical data: Mains connection 380 volts. Welding range 5 - 250 amps. Welding performance: 250 A / 20 V at 60% ED. 200 A / 28 V at 100% ED. Water cooling. High-frequency ignition (HF). Pulse welding function to minimize warping. Adjustable lowering current (crater fill flow). Also suitable for welding with rod electrodes. Condition & Scope of Delivery: Attention: Oerlikon TIG adapter is missing. Oerlikon hose package (not suitable!), TIG welding torches, remote control, and ground cables. Without gas bottle.  ...

MIG/MAG/TIG/TIG/Electrode Welding Machine EWM Integral Inverter MIG 500 Pulse Manufacturer: EWM HIGHTEC WELDING GmbH. Made in Germany. Technical data: Welding current 5 - 500 A. Welding voltage MIG 14.7 - 39 V. Welding voltage TIG 10.2V - 30V Welding voltage electrode 20.2V - 40V. Max. welding current at: 60 %ED 500 A. Max. welding current at: 100 %ED 400 A. MIG/MAG pulse – welding, MIG/MAG – standard, (TIG – HF and Liftarc ignition) and rod electrodes - welding possible. 2-stroke welding or 4-stroke welding. Connection option for: handheld remote control, integralC10, C20, C30, C40, superPulsSP10 and SP11, robot interface RINT 1 and 2, vending machine interface, standard. DIN ISO 9000: standard connection of the documentation interface PCINT 1 for welding data documentation for DIN EN ISO 9000ff. Equipment: DV case integral 4x4. With Fetra hand-flatbed truck,  ...

MIG/MAG/TIG/TIG/Electrode Welding Machine EWM Integral Inverter MIG 500 Pulse Manufacturer: EWM HIGHTEC WELDING GmbH. Made in Germany. Technical data: Welding current 5 - 500 A. Welding voltage MIG 14.7 - 39 V. Welding voltage TIG 10.2V - 30V Welding voltage electrode 20.2V - 40V. Max. welding current at: 60 %ED 500 A. Max. welding current at: 100 %ED 400 A. MIG/MAG pulse – welding, MIG/MAG – standard, (TIG – HF and Liftarc ignition) and rod electrodes - welding possible. 2-stroke welding or 2-stroke welding. Connection option for: handheld remote control, integralC10, C20, C30, C40, superPulsSP10 and SP11, robot interface RINT 1 and 2, vending machine interface, standard. DIN ISO 9000: standard connection of the documentation interface PCINT 1 for welding data documentation for DIN EN ISO 9000ff. Equipment: DV case integral 4x4. With Fetra hand-flatbed truck,  ...

MIG-MAG Welding Machine EWM Messer Griesheim VARIOMIG 600-2 Welding current up to 600 amps with EWM WEGA Drive4 wire feeder case. Manufacturer: Messer Griesheim / EWM. Made in Germany. Welding current 100- 600 A. Welding voltage MIG 19 - 40 V. Max. welding current at: 60%ED 600 A. Max. welding current at: 100%ED 450 A. With intermediate hose package, Welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. MIG-MAG Welding Machine Messer Griesheim VARIOMIG 600-2 / EWM WEGA Drive4 – Shielded Gas Welding Machine Welding Current up to 600 Ampere - MIG/MAG Welding Machine – Welding Power Source - MIG MAG Power Source

MIG-MAG Welding Machine Knife Griesheim VARIOMIG 600-2 Welding current up to 600 amps with EWM WEGA Drive4 wire feeder case. Manufacturer: Messer Griesheim / EWM. Made in Germany. Welding current 100- 600 A. Welding voltage MIG 19 - 40 V. Max. welding current at: 60%ED 600 A. Max. welding current at: 100%ED 450 A. With intermediate hose package, Welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. Without wheels. MIG-MAG Welding Machine Messer Griesheim VARIOMIG 600-2 / EWM WEGA Drive4 – Shielded Gas Welding Machine Welding Current up to 600 Ampere - MIG/MAG Welding Machine – Welding Power Source - MIG MAG Power Source

MIG-MAG Welding Machine Messer Griesheim Euromag 50 to 500 Ampere with EWM WEGA Drive4 wire feeder case. Manufacturer: Messer Griesheim / EWM. Made in Germany. Welding current 80 - 500 A. Welding voltage MIG 18 - 39 V. Max. welding current at: 60%ED 500 A. Max. welding current at: 100%ED 380 A. Water cooling. With intermediate hose package, Welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. MIG-MAG Welding Machine Messer Griesheim / EWM Euromag 50 to 500 Ampere – Shielded Gas Welding Machine - MIG/MAG Welding Machine – Welding Power Source - MIG MAG Power Source

MIG-MAG Welding Machine EWM WEGA 400 MIG DW EWM HIGHTEC WELDING GmbH. Made in Germany. Welding current 50- 400 A. Welding voltage MIG 16.5 - 34 V. Max. welding current at: 45%ED (40°C) 400 A. Max. welding current at: 100%ED (40°C) 265 A. DV case WEGA DRIVE 4. With intermediate hose package, Welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. MIG MAG Welding Machine EWM WEGA 400 MiG DW – Shielded Gas Welding Machine - MIG/MAG Welding Machine