welding machines used for sale (1,703)

Inv. Num. : 8642 Type: ROMAT 350 ROTOL Producer: CLOOS Created: 2007 Parameters: CLOOS Welding Robot Workstation allows welding in the MIG/MAG process alternately at three workstations. Currently, only two are used: One is equipped with a two-axis positioner for fixing the welded part with the possibility of a horizontal axis of rotation with support the second is equipped with the same positioner without support the third workstation is not equipped with a positioner. For an optimal work process, 11 programming axes are available.

Inv. Num. : 8389 Type: 2x ABB IRB 2400L Producer: Robolution Created: 2006 Parameters: Control system: IRC5 Door height: 2800 mm Door opening: 2800 x 2200 mm Machine weight: 5500 kg Height: 2200/3100 mm Width: 3750 mm Length: 5700 mm Equipment: Touch Screen The robot cell consists of: 2x ABB IRB 2400L Robot 2 x lathe (robot welding on one side of the table and the operator loads the material on the other side of the table) Welding power sources: 2x Fronius TPS 4000 Equipment for welding wires with diameters of 1 and 1.2 mm Burner

Inv. Num. : 8310 Type: S8 Robo Mig XT Producer: Lorch Generated: Parameters: Maximum arm reach: 1951 mm Number of axles: 6 pieces Maximum load capacity: 5/10 kg Robot travel: 4700 mm Application A: 2251 mm Areas of application B: 1951 mm Areas of application C: 49 mm Areas of application D: 1257 mm Areas of application E: 986 mm Equipment: Technical documentation Parts of the workplace: Comau Arc Robot 4.5.1945 Lorch S8 Robo Mig XT Welding Machine Anti-collision device Burner cleaning station 2 orbital positioning stages Horizontal Positioning Table Gudel Travel System Switchboard SAFETY safety system

Inv. Num. : 8259 Type: S5-A701S Producer: EPSON Created: 2010 Parameters: Control system: EPSON RC 180 Maximum arm reach: 786 mm Axle number: 6 Machine weight: 36 kg

Inv. Num. : 7724 Type: FD-V8L/FD11 Producer: OTC Created: 2019 Parameters: Accessories: Measurement Wire cutting and grinding Rotary and tilting table Head cleaning station

Inv. Num. : 8094 Type:- Producer: Doosan Created: 2023 Parameters: Maximum load capacity: 25 kg Inclination: 2700 mm Working Range: 360

Inv. Num. : 8093 Type: RX170HP CS7 Producer: Stäubli Created: 1996 Parameters: Maximum arm reach: 1835 mm Number of axles: 6 pieces Maximum load capacity: 65 kg Accessories: A stand for positioning the robot Cable harness Manual Programmer RoboDK Offline Programming Software Spare parts for CS7

Inv. Num. : 8059 Type: SMART 5 NJ60-2.2 Producer: Comau Created: 2015 Parameters: Switch-on hours: 4675 h Maximum arm reach: 2258 mm Number of axles: 6 pieces Maximum load capacity: 60 kg Machine weight: 645 t Equipment: Blacksmith stand Switchgear Fencing

Inv. Num. : 8005 Type: RUM 2500 P Producer: PIERCE Created: 2015 Parameters: Control system: Pierce 4/2015 Software: PIERCE WYKRYS CZ Work table length: 3000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 60 mm Equipment: Technical documentation Plasma source Kjellberg HiFocus 360i Suction KEMPER

Inv. Num. : 7762 Type: TruMatic L 3030 Producer: Trumpf Created: 2005 Parameters: Maximum power: 2 kW Work table length: 3000 mm Work table width: 1500 mm Machine height: 2000 mm Machine length: 9800 mm Machine width: 5300 mm Machine weight: 19000 kg

Inv. Num. : 4060 Type: ARC Mate 120iB Producer: FANUC Created: 2007 Parameters: Control System: R30iA Hours: 985 h Axles: 6 Payload: 20 kg H-reach: 1667 mm Repeatability: ± 0.0800 mm Source: Kempi – KEMPARC SYN300 Mains voltage: +-10%: 3x400 Power: 320 A Weight: 220 kg Accessories: Robot with 2 separate workstations: Danubius positioner and clamping table Dust extraction: POC 20 Table Metal Fence

Inv. Num. : 7264 Type: MA2010 Producer: Yaskawa Created: 2019 Parameters: Maximum arm reach: 2010 mm Maximum load capacity: 10 kg Control voltage: 3 x 400V AC 50 Hz Network Type: TNC-S Components: Controller DX200 Master Welding source Lorch S8 RoboMig XT Burner cleaner BRG2000D 2x Positioner DK-2500-R1000 Servo Rails FB500

Inv. Num. : 5788 Type: MC10L-01 Producer: NACHI Created: 2015 Parameters: Control system: NACHI FD11 Total station hours 1: 45 h Total station hours 2: 21 h Number of axles: 6 pieces Welding radius: 2019 mm Source: ESAB AristoMig U5000i Accuracy: 0.06 mm Load capacity in the 3rd axis: 15 kG Wrist load capacity: 10 kg Degree of protection: IP65 Robot travel: 12000 mm Load capacity of the positioner with support tailstock: 1500 kg Frame length of the 1st station: 6000 mm Frame length of the 2nd station: 4000 mm Maximum turning diameter of the clamping device with the part: 1650 mm Carriageway Positioner with support tailstock Controls Security features and fences Automatic Torch Calibration System Hood (2 pieces) Aspirator TIG torch set with filler wire NYTRON Cleaning Station

A relatively new CNC waterjet cutting system Intermac is available. Working dimensions X/Y: 3000mm/2000mm, operating hours: approx. 4500h. Documentation available. An on-site inspection is possible.

Lg.Nr. 26071 Technical data: - Load capacity 650 kg - Face plate dimensions 700 x 700 mm - Face plate mot. infinitely tiltable 0 - 135 ° - mot. Rotary movement infinitely adjustable 0.07 - 1.5 rpm - Table height in horizontal position 890 mm - E. Control button - Space requirement approx. W 850 x H 890 x D 1200 mm - Weight approx. 400 kg

Offer 24585 Hydr. Welding Rotary and Tilting Table - Three Axis - Welding Manipulator Technical data: - Max. load capacity 3000 kg - Face plate diameter 1100 x 1100 mm - Face plate with hydraulic lifting + swivelling + tilting - Rotary movement electr. infinitely variable 0.01 - 1 rpm - Right + Counterclockwise - Welding current transmission approx. 500 A - Drive 400 V - Connected load 5.5 kVA - Min. table height in horizontal position approx. 1200 mm - Max. table height in horizontal position approx. 1980 mm - Handheld remote control - E - Footswitch - Space requirement approx. W 1700 x H 1300 x D 2950 mm - Weight approx. 4000 kg

Key data: 16 kp, 200 , 390

Rated power at 50%ED: 16kVA Short-circuit current: 20.7kA Electrode force: 65-390daN / single stroke Throat: 200mm --- Welding control: MPS 10beta (5 times, 8 program) --- Incl. additional options: - Footswitch - Transformer tap changer 8-way + main switch - Machine table --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Offered is a 3-axis CNC tube flame cutting system. Tube diameter: 60mm-500mm, square profiles X/Y: 420mm/420mm, tube length max.: 4500mm, wall thickness max.: 1mm-20mm, cutting speed max.: 24000mm/min, positioning accuracy: approx. 0.5mm, clamping force of the chuck: 30000N, torque max.: 13000Nm, cutting system: Hypertherm Powermax 1650, controller: Burny 10 LCD Plus, machine dimensions X/Y/Z: approx. 4000mm/2000mm/1800mm. The controller has a defect and is currently without function. Viewing possible by appointment.

Various spot welding machines and a Dalex cooling unit are available. 1) 2x spot welding machine Dalex PL 80-1, rated power (50%): 80kVA, max. welding power: 245kVA, max. short-circuit current: 35kA, primary voltage: 380V, open-circuit voltage: 8.44V, cooling water quantity: 10l/min, electrode force range: 100daN-600daN. 2) Spot welding machine Dalex PMS 10/1, rated power (50%): 32kVA, max. primary short-circuit current: 30kA, primary voltage: 380V, open-circuit voltage: 4.6V, electrode force range: 65daN-390daN. 3) Spot welding machine Dalex SL 16/EA, rated power (50%): 16kVA, connected load: 37kVA, secondary short-circuit current: 17kA, electrode force range: 17daN-278daN, open-circuit voltage: 3.6V, weight: approx. 200kg. 4) 2x spot welding gun Dalex RS 11 and 3136. 5) Water cooling unit Dalex DRF 4, year of manufacture: 1989, refrigerant: R22, filling weight: 3.5kg, volume flow: 1.3m ...

Lg.Nr. 26086 Clamping-straightening welding table Technical data: - Length 2400 mm - Width 1200 mm - Panel height 200 mm - Wall thickness 25 mm - Hole diameter of the holes approx. 28 mm - Center distance of the perforations each approx. 100 mm - Table height approx. 850 mm - Height-adjustable table height - 16 plug-in screw clamps with clamps - Approx. 22nd plug-in connection bolt - 6 pcs stop and clamping angle approx. 175 x 175 mm - 2 pcs stop and clamping angle approx. 300 x 200 mm - 8 pcs stop with slotted hole + hole 225 x 50 x 20 mm - 2 x stop with slotted hole + hole 225 x 50 x 25 mm - 6 stop with slotted hole 150 x 50 x 20 mm - 2 pcs stop with slotted hole 150 x 50 x 25 mm - Total weight approx. 1000 kg

Offer 26128 Technical data: - Max. load capacity in horizontal position 5000 kg - Face plate diameter 1150 mm - Face plate motorized swivel 0 - 130 ° - Rotary movement electr. Infinitely variable - Right + Counterclockwise - Welding current transmission approx. 500 A - Drive 400 V - Table height in horizontal position approx. 1220 mm - Handheld remote control - Space requirement approx. W 1350 x H 1220 x D 1900 mm - Weight approx. 3500 kg - Adapter plate with clamping device for round material

A height-adjustable turning device PETec for welding work is available. Rotation function: 360°, max. load capacity: 1000kg, height adjustment range: 500mm-2000mm, column spacing range: 500mm-3000mm. An on-site inspection is possible.

A complete CNC CO2 laser cutting system Bystronic is available. Working dimensions X/Y: 4000mm/2000mm, travel path X/Y/Z: 4060mm/2030mm/1700mm, max. simultaneous speed: 84m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. table load: 1500kg, weight: approx. 18500kg, operating hours: 29456h. Laser source: Bystronic ByLaser 6000, laser type: CO2, laser power: 6kW, wavelength: 10600nm, polarization: circular, pulse frequency: 1-2500Hz, max. cutting capacity steel/stainless steel/aluminum: 25mm/25mm/15mm, weight: approx. 1800kg, laser hours: 10275h. Documentation available. An on-site inspection is possible.

Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

A SAF oxy-fuel cutting system in a single-torch configuration without plasma is available, number of torches: 6, tool holder stroke: 150mm, rapid traverse: 15m/min, cutting speed: 4m/min, max. cutting thickness: 200mm, max. plate dimensions X/Y: approx. 2800mm/6000mm, on-site inspection is possible.

An industrial large-format welding rectifier ESAB is available. Rated current: 1250A, welding voltage: 44V, power factor: 0.92, weight: approx. 490kg. An on-site inspection is possible.

CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of Make: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x Plasma with power source Kjellberg HiFocus 161i Preparation for retrofitting oxy-fuel burners Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control

Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: Dalex, 2 coupled spot welding machines, with storage table -Type: SL 25/EA -Rated power: 25 kVA each -Projection: 600 mm -Intermediate dimension: up to 1590 mm -Operation: via foot pedal -Individual components: see photos -Dimensions: Machine 2140/1160/H1220 mm / Table 1565/1075/1140 mm -Weight: 535 kg / 112 kg

Laser Cutting Machine Manufacturer: Messer Type: Multilas 6020 Year of Make: 2001 CNC Control: Omnicom 160iL Working area: 2,000 x 6,000 mm Laser: Fanuc C4000 Laser power: 4000 W Connected load: 137 A