Vacuum mixer used for sale (36)

VAKONA energy-saving cooling tumbler ESK 850 STL-B Year of Make: 2017 Equipment: – Container, machine cabinet and frame made entirely of stainless steel – Machine fixed – Touch screen control for operation in manual and automatic operation – Storage space for up to 99 recipes with freely programmable parameters: total, working and break time, rotation speed, Temperature, vacuum height, ventilation intervals, container position and container swivel operation – Rotational speed of the arm infinitely variable from 3-18 rpm – Direct cooling system with powerful cooling unit, heat exchanger in double-jacketed tank made entirely of stainless steel – Vacuum system including high-performance vacuum pump, fully automatic, programmable ventilation cycles, – sterile filters for disinfection of ventilation air, hygienic automatic water separator – electric infinitely ...

VACUUM MASSAGER, INJECT STAR TYPE: MAGNUM 2600 Technical description: Serial number: 3730 Capacity: 2600 l Power supply: 380-440V/50-60 Hz, 3ph Power: 7 Kw Tumbler dimensions: 1300 x 2450 mm Dimensions: 3270 x 1850 x 1900 mm With this machine you are in a position to massage meat at any time, fully automatically and at maximum, so that the general appearance and flavour is improved, as well as the structural loosening up of the meat and the essential assimilation of both the natural juices and injected brine, by binding in, is achieved. HOMOGENEOUS BRINE DISTRIBUTION Sealing-in of Protein: The binding of the surface cells, seals off the inner moisture and prevents drying out. Optimum Protein-Water-Ratio: Whether you massage ham, shoulder, loin, tongue, belly, brisket or rough and fine fillings for cooked, boiled, raw and preserved sausage, whole chickens or chicken parts, fish or othe ...

We are selling here a vacuum tumbler from the manufacturer Günther, type GPA 200K in a good used and functional condition. The machine was built in 2009, runs on 400 volts, 1.5 kW, completely stainless steel, rollable, container tiltable, volume 200 liters, capacity 140 kg, programmable control, without cooling, workshop tested, immediately ready for use, dimensions W/D/H 175/82/160 cm, others on request.

We sell here a vacuum tumbler with cooling from the manufacturer Günther, type GPA 200K in a good used and functional condition. The machine was built in 2004, runs on 400 volts, 1.5 kW, completely stainless steel, rollable, container tiltable, volume 200 liters, capacity 140 kg, programmable control, workshop tested, immediately ready for use, dimensions W/D/H 175/82/160 cm, others on request.

Vakona ESK 850 STL-B incl. loading, top condition

Dorit Vacuum Cooling Tumbler in very good condition CVM 300

Height 2700 mm Width 1440 mm Length 2700 mm Electrical Supply: 400V 50Hz 3N Total power 12.5 kW Main Material Stainless Steel, Acid Resistant Agitator Type Spiral Agitators Product ejection Pneumatic flaps, front Product Weighing System No Loading None, possibility to buy additional loading into the bulk mill Stirrer Type Vacuum Stirrer

Type: MIX-180V Serial number: 2440 Year of construction: 2023 Mixer: 180 litres, double paddle Mixing speed: 6 - 60 RPM, frequency controlled Vacuum pump: Busch 21m³/h Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 3kW Dimensions: 1750 x 850 x 1450 mm Weight: 388 kg Machine in new condition, only 8 working hours!

Ekomex Vacuum Mixer -Type: MZ 500V -Power: 9 kW -Capacity: 500 L -Vacuum pump -With vacuum -Two speeds -Right/left rotation -With loading -2 paddle mixers -Power supply: 400V 50Hz -Dimensions: 2100 x 1900 x 2720 mm -Made of stainless steel -Condition: used in very good condition, overhauled, ready to work

The Lutetia Type 5 vacuum churn is a must-have tool for food industry professionals looking to improve the quality and efficiency of their processing processes. Designed for processing large quantities of meat, this churn optimizes marinating and seasoning with its vacuum operation, ensuring even absorption of liquids and spices. This machine is equipped with a timer with variable speed drive, which allows each cycle to be customized according to specific production needs. As a result, it delivers consistent results while optimizing processing time. Thanks to its large capacity of 3800 to 4000 kg of meat and brine, the Lutetia T5 is particularly suitable for intensive production environments. Its robust, stainless steel design ensures exceptional durability and maximum hygiene, essential in food processing processes. In addition, its variable speed control allows precise control of th ...

The Lutetia T4 vacuum churn is an essential tool for meat processing companies looking to optimize the quality and efficiency of their processes. Thanks to its high-performance vacuum system, this churn ensures homogeneous absorption of liquids, which improves the texture and flavor of the finished products. In fact, it allows you to marinate large quantities of meat efficiently, guaranteeing consistent and high-quality results. In addition, the Lutetia Type 4 Churn stands out for its robustness and ability to meet the demands of intensive production environments. With a high mixing capacity, it is perfectly suited for large productions, while ensuring a smooth and fast work process. In addition, it can be easily integrated into different production lines, offering great flexibility in terms of managing the volumes and types of meat processed. In short, the Lutetia Type 4 Churn is  ...

The Lutetia Type 3 churn meets the requirements of workshops looking for a higher level of capacity without sacrificing process precision. Thanks to vacuum mixing, marinades penetrate faster and more evenly, improving texture, limiting oxidation and stabilizing yields. This makes the machine ideal for integration into processing lines where regularity, hygiene and speed are paramount on a daily basis. In addition, its useful volume of 2500 L and its capacity of 1400 to 1500 kg make it possible to absorb large batches, while maintaining a homogeneous mixing. Indeed, the geometry of the bowl, combined with vacuum work, promotes the diffusion of brine and reduces cycle times. In addition, the ergonomics of the heights (loading, shaft and under the mouth) facilitate handling, tank feeding and evacuation, which concretely optimizes the flow on the line. In addition, the stainless steel  ...

The Lutetia T2 churn is a benchmark machine in the field of vacuum mixing. Designed to meet the needs of meat and food processing plants, it offers a capacity perfectly suited to medium-sized productions. This ensures an ideal balance between performance and space. Thanks to its homogeneous mixing system, the T2 Churn optimizes marination and improves the texture of the products. This is because the vacuum process promotes uniform brine penetration and reduces yield losses. In addition, it preserves the quality of the meat by limiting oxidation and improving preservation. This efficiency makes it an essential tool for manufacturers wishing to produce with regularity and consistency. In addition, its robustness and stainless steel design ensure optimal durability. Food contact surfaces meet the highest hygiene standards, simplifying cleaning and maintenance. In addition, its footpri ...

The Lutetia Type 1 sous vide churn is aimed at food professionals who require high marinade quality and production performance. Indeed, this model can process up to 400 kg of meat and brine per cycle, making it a perfect solution for medium-sized workshops. In addition, the 950 liter tank volume ensures a comfortable margin for vacuum marinating operations, while ensuring repeatability of results and consistency of processing. Thanks to its compact design (2150 × 1230 × 1730 mm) and a weight of approx. 800 kg, this churn easily fits into an existing production line. In addition, vacuum technology improves brine absorption, enhancing the texture, taste and added value of the finished product. For example, the internal components and robust workmanship ensure a longer service life, while the quick integration and simplified maintenance reduce production downtime. In addition, the L ...

Stephan VM60 Vacuum Mixer used with push-button switch, according to the previous owner 20 minutes interval, 4x on, 4x off then must be switched on again Mixed insert made of stainless steel Machine for emptying and operation with low content tiltable Boiler volume: 72 litres Batch sizes: up to 60 litres the machine must be thoroughly cleaned before use, as there are protein deposits inside Dimensions: 84x58x120cm Video about test run available Mixing Tumbler, Tumbler, Vacuum Tumbler, Mixer, Mixing Machine, Mixing Machine

Rühle MKR130 Tumbler used Machine is completely made of stainless steel Mixing arm can be dismantled without tools via bayonet Mixing, batching and rumbling under vacuum and cooled Fully functional must be cleaned thoroughly before use, as protein deposits are present only the red wiper rubber is missing on the pile arm and the left side part was slashed (see photos) Video about test run available

Height 2000 mm Width 1900 mm Length 4000 mm Capacity 2600 l Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Barrel Aeration Valve Yes, Manual Valve Variable speed control of the tumbler Smooth adjustment of the barrel speed Tumbler with cooling jacket No Loading Loading integrated into the machine Load 1800 kg

Height 1650 mm Width 1000 mm Length 1250 mm Capacity 150 l Power supply: 400V 50Hz 3N Total power 3 kW Main Material Stainless steel, acid-resistant Barrel Aeration Valve Yes, Solenoid Valve Variable speed control of the tumbler Smooth adjustment of the barrel speed Cooling jacket tumbler Yes, refrigeration unit built into machine design Loading No loading, it is possible to buy hydraulic loading for the machine

Vacuum tumbler VT 1000 incl. pumps and controls

All stainless steel Hopper capacity: 750 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 9 KW Installation dimensions of machines in cm: Width: 143 Length: 195 Height: 187

All stainless steel Hopper capacity: 1200 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 11 KW Installation dimensions of machines in cm: Width: 162 Length: 224 Height: 191

All stainless steel Hopper capacity: 2000 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 18 KW Installation dimensions of machines in cm: Width: 193 Length: 227 Height: 215

All stainless steel Hopper capacity: 2500 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 25 KW Installation dimensions of machines in cm: Width: 215 Length: 235 Height: 225

Type: SV 660 l 2P-V Completely stainless steel Hopper capacity 660 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 9.5 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Width: 140 Length: 170 Height: 161

Type: SV 300 l 2P-V Completely stainless steel Hopper capacity 300 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 5 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Width: 124 Length: 143 Height: 147

Height 2200 mm Width 1400 mm Length 2800 mm Weight approx. 1300 kg Capacity 2000 l Power supply: 400V 50Hz 3N Total power 5.1 kW Main Material Stainless steel, acid-resistant Order processing time available in stock Barrel Aeration Valve Yes, Manual Valve Driver type Mikster MCM 023 Variable speed control of the tumbler Smooth adjustment of the barrel speed Tumbler with cooling jacket No Load approx. 1400 kg

Height 2000 mm Width 1300 mm Length 2100 mm Capacity 1500 l Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Barrel Aeration Valve Yes, Solenoid Valve Loading No loading, it is possible to buy hydraulic loading for the machine

Height 1800 mm Width 1300 mm Length 2700 mm Weight 780 kg Capacity 1600 l Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Loading No loading, it is possible to buy hydraulic loading for the machine

Type: VM 1500, capacity: 1500 liters, jacketed tank with agitator, cooling/heating capability, agitator power: 7.5 kW, Rietschle vacuum pump, capacity: 21m3/h, power 1.5 kW, Schema Hydraulik hydraulic pump, power: 1.5 kW, new touch control panel Mixer Indu IMAX 500. Can be connected to a through cutter.

Type Vacuum tumblers Height 2100 mm Width 1900 mm Length 1800 mm Weight 1100 kg Capacity 300 l Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Barrel Aeration Valve Yes, Solenoid Valve Variable speed control of the tumbler Smooth adjustment of the barrel speed Cooling jacket tumbler Yes, refrigeration unit built into machine design Loading Loading integrated into the machine

Type Vacuum tumblers Height 2150 mm Width 2200 mm Length 1400 mm Capacity 600 l Power supply: 400V 50Hz 3N Total power 4.8 kW Main Material Stainless steel, acid-resistant Barrel Aeration Valve Yes, Solenoid Valve Cooling jacket tumbler Yes, refrigeration unit built into machine design Loading Loading integrated into the machine

RUHLE / RÜHLE MKR 600 Vacuum Cooling Tumbler Year 2008 Touch-PC control Automated lid Tiltable hopper Direct cooling system Stainless steel vacuum canal, cooled Feed system Quick arm fastening Scraper, pressure assembling Variable speed from 0-25 RPM Vacuum system from 0-90% 600 liters tumbler

Inject Star ES-1100 Vacuum Tumbler-Ref.8491D Brand: Inject Star Model: ES1100 Manufacture year: 2005 Volts (v): 3 220 / 380 V / 50 Hz Power : 2,2 kW Width: 1540 mm Height: 1800 mm Length: 2150 mm Weight: 750 Kg This machine is designed for massaging meat with and without bones, using a special baffle. The product is moved across the special baffle to provide efficient protein activation, and massaging in a rotating, sliding, and slipping movement. Drum volume: 1100 l Optimal loading: 500-700 kg Drum rotating speed: 1-11 turnovers per minute The system is driven by a frequency controlled motor via friction rollers. The container is emptied by rotating it to the left. Equipped with computer. Up to 99 production programs can be created and stored. The programmable parameters are: massaging speed, massaging duration, direction of rotation, processing time,  ...

Vacuum Thumbler Ulbricht Fully refurbished Type: SKMA 1500 Capacity: 2000 liters Power: 11.5 kW Outer dimensions: 2700 x 2400 x 2150 mm Controller Smooth speed control Entirely made of stainless steel Cooling Vacuum Tilting drum up and down Condition: Fully refurbished

Type: S 500 l 2P-V Complete stainless steel Hopper capacity 500 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 5.6 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Width: 160 Lenght: 95 Height: 142 Delivery time: after advanced payment, one working day

Type: S 300 l 2P-V Complete stainless steel Hopper capacity 300 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 4.4 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of machine in cm: Width: 135 Lenght: 84 Height: 142 Delivery time: after advanced payment, one working day